Home
>
Multi-Tech Systems
>
Communications System
>
Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide
Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide
Here you can view all the pages of manual Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide. The Multi-Tech Systems manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 211
MultiVOIP User Guide Technical Configuration (Analog) 211 The SMTP Parameters screen is shown below. . “SMTP Parameters” Definitions Field Name Values Description Enable SMTP Y/N In order to send log reports by email, this box must be checked. However, to enable SMTP functionality, you must also select “SMTP” in the Logs screen. Login Name alpha- numeric, per email domainThis is the User Name for the MultiVOIP unit’s email account. Password alpha- numericLogin password for MultiVOIP unit’s email...
Page 212
MultiVOIP User Guide Technical Configuration (Analog) 212 ...... “SMTP Parameters” Definitions (cont’d) Field Name Values Description Mail Type text or html Mail type in which log reports will be sent. Subject text User specified. Subject line that will appear for all emailed log reports for this MultiVOIP unit. Reply-To Addressemail addressUser specified. This email address functions as a source email identifier for the MultiVOIP, which, of course, cannot usefully receive email messages. The Reply-To...
Page 213
MultiVOIP User Guide Technical Configuration (Analog) 213 The SMTP Parameters dialog box has a secondary dialog box, Custom Fields, that allows you to customize email log messages for the MultiVOIP. The MultiVOIP software logs data about many aspects of the call traffic going through the MultiVOIP. The Custom Fields screen lets you pick which aspects will be included in the email log reports. “Custom Fields” Definitions Field Description Field Description Select All Log report to include all fields...
Page 214
MultiVOIP User Guide Technical Configuration (Analog) 214 “Custom Fields” Definitions (cont’d) Field Description Field Description Outbound DigitsDigits put out by MultiVOIP onto the phone line.Prefix MatchedWhen selected, the phonebook prefix matched in processing the call will be listed in log. Call StatusSuccessful or unsuccessful. From DetailsTo Details Gateway NumberOriginating gatewayGatew N.Completing or answering gateway IP Addr IP address where call originated.IP AddrIP address where call was...
Page 216
MultiVOIP User Guide Technical Configuration (Analog) 216 14. Set Log Reporting Method. The Logs screen lets you choose how the VoIP administrator will receive log reports about the MultiVOIP’s performance and the phone call traffic that is passing through it. Log reports can be received in one of three ways: A. in the MultiVOIP program (GUI), B. via email (SMTP), or C. at the MultiVoipManager remote voip system management program (SNMP). Accessing “Logs” Screen Pulldown Icon Shortcut Sidebar Ctrl +...
Page 217
MultiVOIP User Guide Technical Configuration (Analog) 217 Select the logging option that applies to your VoIP system design. If you intend to use a SysLog Server program for logging, click in that Enable check box. The common SysLog logical port number is 514. If you intend to use the MultiVOIP web browser GUI for configuration and control of MultiVOIP units, be aware that the web browser GUI does not support logs directly. However, when the web browser GUI is used, log files can still be sent to the...
Page 218
MultiVOIP User Guide Technical Configuration (Analog) 218 “Logs” Screen Definitions Field Name Values Description Enable Console MessagesY/N Allows MultiVOIP debugging messages to be read via a basic terminal program like HyperTerminal ™ or equivalent. Normally, this should be disabled because it uses MultiVOIP processing resources. Console messages are meant for tech support personnel. Turn Off Logs Y/N Check to disable log reporting function. Logs Buttons Only one of these three log reporting methods,...
Page 219
MultiVOIP User Guide Technical Configuration (Analog) 219 15. Set Supplementary Services Parameters. This dialog box can be reached by pulldown menu, keyboard shortcut, or sidebar. Accessing “Supplementary Services” Parameters Pulldown Icon Shortcut Sidebar Ctrl + Alt +H Supplementary Services features derive from the H.450 standard, which brings to voip telephony functionality once only available with PSTN or PBX telephony. Supplementary Services features can be used under H.323 only and not under SIP.
Page 220
MultiVOIP User Guide Technical Configuration (Analog) 220 In each field, enter the values that fit your particular network. Of the features implemented under Supplementary Services, three are very closely related: Call Transfer, Call Hold, and Call Waiting. Call Name Identification is similar but not identical to the premium PSTN feature commonly known as Caller ID. Call Transfer. Call Transfer allows one party to re-connect the party with whom they have been speaking to a third party. The first...