Home > Multi-Tech Systems > Communications System > Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

Here you can view all the pages of manual Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide. The Multi-Tech Systems manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 221

MultiVOIP User Guide Technical Configuration (Analog)
221
the channel over which the call is being originated (for example,
“Calling Party - Omaha Sales Office Line 2”). If that voip channel is
dedicated to a certain individual, the descriptor could say that, as
well (for example “Calling Party - Harold Smith in Omaha”).  When
the home voip receives a call from any remote voip, the home voip
sends a status message back to that caller.  This message confirms
that the home voip’s phone channel is either...

Page 222

MultiVOIP User Guide Technical Configuration (Analog)
222
The Supplementary Services fields are described in the tables below.
Supplementary Services Parameter Definitions
Field Name Values Description
Select
Channel1-2 (210);
1-4 (410);
1-8 (810)The channel to be configured is
selected here.
Call
Transfer
EnableY/NSelect to enable the Call Transfer
function in the voip unit.
This is a “blind” transfer and the
sequence of events is as follows:
Callers A and B are having a
conversation.
Caller A wants to...

Page 223

MultiVOIP User Guide Technical Configuration (Analog)
223
Supplementary Services Definitions (cont’d)
Field Name Values Description
Call Hold
EnableY/NSelect to enable Call Hold function in
voip unit.
Call Hold allows one party to
maintain an idle (non-talking)
connection with another party while
receiving another call (Call Waiting),
while  initiating another call (Call
Transfer), or while performing some
other call management function.
Hold
Sequencephone
keypad
characters
The numbers and/or symbols...

Page 224

MultiVOIP User Guide Technical Configuration (Analog)
224
Supplementary Services Definitions (cont’d)
Field Name Values Description
Call Name
Identification
EnableEnables CNI function.  Call Name
Identification is not the same as Caller
ID.  When enabled on a given voip
unit currently being controlled by the
MultiVOIP GUI (the ‘home voip’),
Call Name Identification sends an
identifier and status information to
the administrator of the remote voip
involved in the call. The feature
operates on a...

Page 225

MultiVOIP User Guide Technical Configuration (Analog)
225
Supplementary Services Definitions (cont’d)
Field Name Values Description
Calling
Party,
Allowed
Name Type
(CNI)If the ‘home’ voip unit is originating
the call and Calling Party is selected,
then the identifier (from the Caller Id
field) will be sent to the remote voip
unit being called.  The Caller Id field
gives the remote voip administrator a
plain-language identifier of the party
that is originating the call occurring
on a specific channel....

Page 226

MultiVOIP User Guide Technical Configuration (Analog)
226
Supplementary Services Definitions (cont’d)
Field Name Values Description
Alerting
Party,
Allowed
Name Type
(CNI)If the ‘home’ voip unit is receiving the
call and Alerting Party is selected,
then the identifier (from the Caller Id
field) will tell the originating remote
voip unit that the call is ringing.
This field is applicable only when the
‘home’ voip unit is receiving the call.
Example.  Suppose a voip system has
offices in both Denver and...

Page 227

MultiVOIP User Guide Technical Configuration (Analog)
227
Supplementary Services Definitions (cont’d)
Field Name Values Description
Busy Party,
Allowed
Name Type
(CNI)If the ‘home’ voip unit is receiving a
call directed toward an already
engaged channel or phone station and
Busy Party is selected, then the
identifier (from the Caller Id field)
will tell the originating remote voip
unit that the channel or called party is
busy.
This field is applicable only when the
‘home’ voip unit is receiving the...

Page 228

MultiVOIP User Guide Technical Configuration (Analog)
228
Supplementary Services Definitions (cont’d)
Field Name Values Description
Connected
Party,
Allowed
Name Type
(CNI)If the ‘home’ voip unit is receiving a
call and Connected Party is selected,
then the identifier (from the Caller Id
field) will tell the originating remote
voip unit that the attempted call has
been completed and the connection is
made.
This field is applicable only when the
‘home’ voip unit is receiving the call.
Example.  Suppose a...

Page 229

MultiVOIP User Guide Technical Configuration (Analog)
229
Supplementary Services Definitions (cont’d)
Field Name Values Description
Caller ID This is the identifier of a specific
channel of the ‘home’ voip unit.  The
Caller Id field typically describes a
person, office, or location, for
example, “Harry Smith,” or “Bursar’s
Office,” or “Barnesville Factory.”
Default -- When this button is clicked, all
Supplementary Service parameters
are set to their default values.
Copy
Channel-- Copies the Supplementary...

Page 230

MultiVOIP User Guide Technical Configuration (Analog)
230
16. Set Baud Rate.   The Connection option in the sidebar menu has a
“Settings” item that includes the baud-rate setting for the COM port
of the computer running the MultiVOIP software.
First, it is important to note that the default COM port established by
the MultiVOIP program is COM1.  Do not accept the default value
until you have checked the COM port allocation on your PC.  To do
this, check for COM port assignments in the system resource...
Start reading Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

Related Manuals for Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

All Multi-Tech Systems manuals