Home > Multi-Tech Systems > Communications System > Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

Here you can view all the pages of manual Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide. The Multi-Tech Systems manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 261

MultiVOIP User Guide T1 PhoneBook Configuration
261
The Series I analog VOIP phone book resides in the “Host” VOIP unit at
Site B.  It applies to both of the Series I analog VOIP units.
Each of the Series II analog MultiVOIPs (the MVP210 and the MVP410)
requires its own inbound and outbound phonebooks.  The MVP2410
digital MultiVOIP requires its own inbound and outbound
phonebooks, as well. 

Page 262

E1 Phonebook Configuration MultiVOIP User Guide
262
These seven phone books are shown below.
Phone Book for Series I Analog VOIP Host Unit (Site B)
VOIP Dir #
-OR-
Destination
PatternIP Address Channel Comments
102 200.2.9.8 2 Site B, FXS channel.
101 200.2.9.8 1 Site B, FXO
channel.
421 200.2.9.6 0 Site E FXS channel.
201 200.2.9.7 1 Site A, FXS
channel.
1615
xxx
xxxx200.2.9.9 0
(Note 2.)Gives remote voip
users access to local
PSTN of Site D
(Pierre, SD, area
code 615).
3xxx
(Note 1.)200.2.9.9 0 Allows...

Page 263

MultiVOIP User Guide T1 PhoneBook Configuration
263
Note 1.  The “x” is a wildcard character.
Note 2.  By specifying “Channel 0,” we instruct the
MVP2400/2410 to choose any available data
channel to carry the call.
Note 3.  Note that Site F key system has only 30 extensions
(x7400-7429).  This destination pattern (140226374)
actually directs calls to 402-263-7430 through
402-263-7499 into the key system, as well.
This means that such calls, which belong on the
PSTN, cannot be completed.  In some cases,...

Page 264

E1 Phonebook Configuration MultiVOIP User Guide
264
Outbound Phone Book for MVP2400 Digital VOIP
(Site D)
Destin.
PatternRemove
PrefixAdd
PrefixIP
AddressComment
201 200.2.9.7To originate calls to
Site A (Bismarck).
1507 1507 101#
Note 3.
200.2.9.8 To originate calls
to Rochester local
PSTN using the
FXO channel
(channel #1) of the
Site B VOIP.
102 200.2.9.8 To originate calls
to phone
connected to FXS
port (channel #2)
of the Site B VOIP.
421 200.2.9.6 Calls to Site E
(Cheyenne).
1402 200.2.9.5 Calls to...

Page 265

MultiVOIP User Guide T1 PhoneBook Configuration
265
Inbound Phonebook for MVP2400/2410 Digital VOIP
(Site D)
Remove
PrefixAdd
PrefixChannel
NumberComment
16159,
Note 4.
Note 5.0Allows phone users at remote
voip sites to call non-toll
numbers within the Site D area
code (615; Pierre, SD) over the
VOIP network.
1615
4923131 0Allows voip calls directly to
employees at Site D (at
extensions x3101 to x3199).
Note 4.  “9” gives PBX station users access to outside line.
Note 5.  The comma represents a...

Page 266

E1 Phonebook Configuration MultiVOIP User Guide
266
Outbound Phone Book for MVP410 Analog VOIP
(Site F)
Destin.
PatternRemove
PrefixAdd
PrefixIP
AddressComment
201 200.2.9.7 To originate calls
to Site A
(Bismarck).
1507 1507 101#
Note 3.
200.2.9.8 To originate calls
to any PSTN
phone in
Rochester area
using the FXO
channel (channel
#1) of the Site B
VOIP.
102 200.2.9.8 To originate calls
to phone
connected to FXS
port (channel #2)
of the Site B VOIP
(Rochester).
421 200.2.9.6 Calls to Site E
(Cheyenne)....

Page 267

MultiVOIP User Guide T1 PhoneBook Configuration
267
Inbound Phonebook for MVP410 Analog VOIP (Site F)
Remove
PrefixAdd
PrefixChannel
NumberComment
1402 4Access to Lincoln local PSTN by
users at remote VOIP locations
via FXO port at Site F.
1402
263740740 0
1402
263741741 0
1402
263742742 0
Gives remote voip users access
to extension of key phone
system at Site F (Lincoln).
Because call is completed at key
system, abbreviated dialing (4
digits) is not workable. 
Human
operator or auto-attendant is
needed...

Page 268

E1 Phonebook Configuration MultiVOIP User Guide
268
Outbound Phone Book for MVP210 Analog VOIP
(Site E)
Destin.
PatternRemove
PrefixAdd
PrefixIP
AddressComment
201 200.2.9.7 To originate calls
to Site A.
1507 1507 101#
Note 3.
200.2.9.8 To originate calls
to any PSTN
phone in
Rochester area
using the FXO
channel (channel
#1) of the Site B
VOIP.
102 200.2.9.8 To originate calls
to phone
connected to FXS
port (channel #2)
of the Site B VOIP.
1402 200.2.9.5 Calls to Lincoln
area PSTN (via
FXO channel,
CH4,...

Page 269

MultiVOIP User Guide T1 PhoneBook Configuration
269
Inbound Phonebook for MVP210 Analog VOIP (Site E)
Remove
PrefixAdd
PrefixChannel
NumberComment
421 1 

Page 270

E1 Phonebook Configuration MultiVOIP User Guide
270
Call Completion Summaries
Site A calling Site C, Method 1
1.
 Dial 101.
2.
 Hear dial-tone from Site B.
3.
 Dial 7175662.
4.
 Await completion.  Talk.
Site A calling Site C, Method 2
1.
 Dial 101#7175662
2.
 Await completion.  Talk.
Note:  Some analog VOIP gateways will allow
completion by Method 2.  Others will not.
Site C calling Site A
1.
 Dial 7175000.
2.
 Hear dial-tone from Site B VOIP.
3.
 Dial 201.
4.
 Await completion.  Talk. 
Start reading Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

Related Manuals for Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

All Multi-Tech Systems manuals