Home > Multi-Tech Systems > Communications System > Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

Here you can view all the pages of manual Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide. The Multi-Tech Systems manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 231

MultiVOIP User Guide Technical Configuration (Analog)
231
17. View System Information screen and set updating interval (optional).
This   dialog box can be reached by pulldown menu, keyboard shortcut,
or sidebar.
Accessing “System Information” Screen
Pulldown Icon
Shortcut Sidebar
 Ctrl + Alt +Y 

Page 232

MultiVOIP User Guide Technical Configuration (Analog)
232
This screen presents vital system information at a glance. It’s primary
use is in troubleshooting.
System Information Parameter Definitions
Field Name Values Description
Boot Code
Versionnn.nnIndicates the version of the code that
is used at the startup (booting) of the
voip.  The boot code version is
independent of the software version.
Mac
Addressalpha-
numericDenotes the number assigned as the
voip unit’s unique Ethernet address.
Up Timehours:...

Page 233

MultiVOIP User Guide Technical Configuration (Analog)
233
The frequency with which the System Information screen is updated is
determined by a setting in the Logs screen
18. Saving the MultiVOIP Configuration.  When values have been set
for all of the MultiVOIP’s various operating parameters, click on Save
Setup in the sidebar. 

Page 234

MultiVOIP User Guide Technical Configuration (Analog)
234
19. Creating a User Default Configuration.  When a “Setup” (complete
grouping of parameters) is being saved, you will be prompted about
designating that setup as a “User Default” setup.  A User Default
setup may be useful as a baseline of site-specific values to which you
can easily revert.  Establishing a User Default Setup is optional. 

Page 235

235
Chapter 7: T1 Phonebook
Configuration
(North American Telephony Standards) 

Page 236

236
Configuring the MVP2400/2410
MultiVOIP Phonebooks
When a VoIP serves a PBX system, it’s important that the operation of
the VoIP be transparent to the telephone end user.  That is, the VoIP
should not entail the dialing of extra digits to reach users elsewhere on
the network that the VoIP serves.  On the contrary, VOIP service more
commonly reduces dialed digits by allowing users (served by PBXs in
facilities in distant cities) to dial their co-workers with 3-, 4-, or 5-digit
extensions as if they...

Page 237

MultiVOIP User Guide T1 PhoneBook Configuration
237
and terminating in New York City but off the company’s premises in an
adjacent area code, an area code different than the company’s office but
still a local call from that office (e.g., Staten Island).
The first type of call requires an entry in the Outbound PhoneBook of
the Miami VOIP and a coordinated entry in the Inbound phonebook of
the New York VOIP.  These entries would allow the Miami caller to dial
the New York office as if its phones were...

Page 238

E1 Phonebook Configuration MultiVOIP User Guide
238
Phonebook configuration screens can be accessed using icons or the
sidebar menu.
Phonebook Icons Description
Phonebook Configuration
Inbound Phonebook
Entries List
Add Inbound Phonebook
Entry
Edit selected Inbound
Phonebook Entry
Outbound Phonebook
Entries List
Add Outbound
Phonebook Entry
Edit selected Outbound
Phonebook Entry 

Page 239

MultiVOIP User Guide T1 PhoneBook Configuration
239
Phonebook Sidebar Menu
1.  Go to the PhoneBook Configuration screen (using either the sidebar
or drop-down menu). 

Page 240

E1 Phonebook Configuration MultiVOIP User Guide
240
In consultation with your VOIP administrator, enter the Gateway
Name and values for Q.931 parameters and Gatekeeper RAS
parameters. Determine whether your voip system will operate with a
proxy server.  Determine which H.323 version 4 functions you will
implement. (They are not always applicable.  See field description for
each parameter.) 
Start reading Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

Related Manuals for Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

All Multi-Tech Systems manuals