Home
>
Multi-Tech Systems
>
Communications System
>
Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide
Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide
Here you can view all the pages of manual Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide. The Multi-Tech Systems manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 281
MultiVOIP User Guide T1 PhoneBook Configuration 281 In order for any VOIP phone call to be made, there must be both an Inbound Phonebook entry and an Outbound Phonebook entry that describe the end-to-end connection. The phone station originating the call must be connected to the VOIP system. The Outbound Phonebook for that VOIP unit must have a destination pattern entry that includes the ‘called’ phone (that is, the phone completing the call). The Inbound Phonebook of the VOIP where the call is...
Page 282
E1 Phonebook Configuration MultiVOIP User Guide 282 Phonebook configuration screens can be accessed using icons or the sidebar menu. Phonebook Icons Description Phonebook Configuration Inbound Phonebook Entries List Add Inbound Phonebook Entry Edit selected Inbound Phonebook Entry Outbound Phonebook Entries List Add Outbound Phonebook Entry Edit selected Outbound Phonebook Entry
Page 284
E1 Phonebook Configuration MultiVOIP User Guide 284 Phonebook Configuration Procedure 1. Go to the PhoneBook Configuration screen (using either the sidebar menu, drop-down menu, or icon). In consultation with your VOIP administrator, enter the Gateway Name and values for Q.931 parameters and Gatekeeper RAS parameters. Determine whether your voip system will operate with a proxy server. Determine which H.323 version 4 functions you will implement. (They are not always applicable. See field description...
Page 285
MultiVOIP User Guide T1 PhoneBook Configuration 285 The table below describes all fields in the PhoneBook Configuration screen. PhoneBook Configuration Parameter Definitions Field Name Values Description Gateway NameY/N This field allows you to specify a name for this MultiVOIP. When placing a call, this name is sent to the remote MVP3000 for display in Call Progress listings, Logs, etc. Q.931 Parameters Use Fast Start Y/N Enables the H.323 Fast Start procedure. May need to be enabled/disabled for...
Page 286
E1 Phonebook Configuration MultiVOIP User Guide 286 PhoneBook Configuration Parameter Definitions (cont’d) Field Name Values Description Proxy Server Parameters Enable Proxy Y/N Proxy Server IP Addressn.n.n.n where n=0-255Network address of the proxy server that the voip is using. Port Number Logical port number for proxy communications. H.323 Version 4 Parameters Q.931 Multiplexing (Mux)Y/N Signalling for multiple phone calls can be carried on a single port rather than opening a separate signalling port...
Page 287
MultiVOIP User Guide T1 PhoneBook Configuration 287 PhoneBook Configuration Parameter Definitions (cont’d) Field Name Values Description H.323 Version 4 Parameters Parallel H.245 (FS + Tun)Y/NFS (Fast Start or Fast Connect) is a Q.931 feature of H.323v2 to hasten call setup as well as ‘pre-opening’ the media channel before the CONNECT message is sent. This pre- opening is a requirement for certain billing activities. Under Parallel H.245 FS + Tun, this Fast Connect feature can operate simultaneously...
Page 288
E1 Phonebook Configuration MultiVOIP User Guide 288 2. Select PhoneBook Modify and then select Outbound Phone Book/List Entries. Click Add.
Page 289
MultiVOIP User Guide T1 PhoneBook Configuration 289 3. The Add/Edit Outbound PhoneBook screen appears. Enter Outbound PhoneBook data for your MVP3010. Note that the Advanced button gives access to the Alternate IP Routing feature, if needed. Alternate IP Routing can be implemented in a secondary screen (as described after the primary screen field definitions below).
Page 290
E1 Phonebook Configuration MultiVOIP User Guide 290 The fields of the Add/Edit Outbound Phone Book screen are described in the table below. Add/Edit Outbound Phone Book: Field Definitions Field Name Values Description Destination Patternprefixes, area codes, exchanges, line numbers, extensionsDefines the beginning of dialing sequences for calls that will be connected to another VOIP in the system. Numbers beginning with these sequences are diverted from the PTSN and carried on Internet or other IP...