Mitel Sx 200 Ml Pabx Lightware 16 Instructions Guide

TEN: This field lists the tenant group numberforeach station or SUPERSETtelephone. 
Default tenant number is one. 
EXTN: This field lists the extension number of each station or the prime line extension 
number of each SUPERSETtelephone. 
COS: This field lists the Class-of-Service number for each station or SUPE/?SETtele- 
phone. Default COS number is 1. 
COR: This field lists the Class-of-Restriction number for each station or SUPERSET 
telephone. Default COR number is I. 
TYP: The TYP field will...

Customer Data Entry 
RANGE: This softkey allows block programming for consecutive stations and 
SU/?ERSETteiephones. Pressing this softkey displays the prompt: FROM BAY: SLOT 
CIRCUIT. Enter valid Bay, Slot and Circuit numbers for the first device and press the 
ENTER softkey. The system then prompts TO BAY: SLOT CIRCUIT. Enter valid Bay, 
Slot and Circuit numbers for the last device and press the ENTER softkey. Enter Tenant 
Group, Extension Number, COS and COR for the first device, if this has not been...

system will automatically change the programmed device type from 410 to 420. Table 
4-4 shows which SU/?WSHtelephones will operate when they are installed on the 
programmable device types. 
Table 4-4 Installed SUPERSETvs Programmed Device Type 
installed SUPERSET 
SUPERSET 401+ 401 
Yes Programmed Device Type 
410 420 
No No 430 
No 
SUPERSET 4 10 
SUPERSET 420 No 
No Yes 
Yes Yes* 
Yes Yes* 
Yes 
SUPERSET 430 No Yes Yes Yes 
Note: 1. Yes - Programmed device type for the circuit changes automatically to...

Customer Data Entry 
Expand PKM Subform 
This form appears when you press the EXPAND PKM softkey in the Station/ 
SUPfRSETTelephones form. You use this form to program PKM line appearances 
and feature keys. Up to three PKMs may be programmed; an * indicates a PKM is 
associated with a telephone. Refer to Figure 4-i 1 for the form layout. This form is 
available to SUPERSET 430, SLJPERSET 420, and SUPERSET 4 10 telephones. 
/3:49 PM 9-JQN-97 alarm status = NO flLftRM 
KE’f 
TYPE DIR RING SEC DSS EXT NUM...

RING: If the key is a line appearance, the ringing variant of the line (lmmed, Delay, or 
None) is shown. 
SEC: If the key is a line appearance, this field indicates (Yes or No) whether the 
secretarial variant is enabled. For a Busy Lamp key, setting this field to YES causes 
an immediate release when the DSS key is pressed. 
DSS: A YES in this field indicates that the key is a DSS key. 
EXT NUM: This field contains the extension number of the line. This applies to the 
Prime Line, Key lines, Multiple...

Customer Data Entry 
. 
. 
. 
. 
. 
. 
. 
. 
. 
. 
. 
. 
. 
. 
. 
. 
. 
. 
. 
ACCOUNT CODE 
AUTO ANSWER 
CALL FORWARD 
CALL PICKUP 
CALL/Al-TN (Data Call Connect) 
CALLBACK 
CAMPON 
DATA DISC (Data Call Disconnect) 
DO NOT DIST (Do Not Disturb) 
DOUBLE FLASH 
FORWARD CALL 
MUSIC 
NIGHT ANSWER 
OVERRIDE 
PRIVACY REL (Privacy Release) 
PA PAGING 
RELEASE 
SINGLE FLASH 
SWAP (Trade Calls) 
Note: Refer to the Feafures Description Practice, for a description of the feature keys available for 
digital...

**MORE**: Pressing this softkey displays the next group of softkeys available. You 
may continue to press the MORE softkey to view all softkeys, and return to the first 
groups presented. 
MULTI-CALL: Pressing this softkey assigns the selected SLJPERSETkey as a Multiple 
Call Line appearance. “Multiple” appears in the TYPE field. Then use the TAB or -+ 
key to move the cursor to the DIRECTION field. 
NON DSS: Appears only in the DSS field. Disables the DSS key associated with a 
BLF appearance. The “No”...

Customer 
PERSONAL KEYS j 
KEY 
LABELS - A 
- 23 
@$y; 21 
.9 , 19 
f 29 
7 
Figure 4-12 PKM Key Numbers 
4-48 
Issue 1 Revision 0 March 1997  

SUPERSET 
KEY12 
KEY02 
KEY06 - 
KEYO2- 
SUPERSEl410 
- KEY11 
- KEY01 
SUPERSEl420 
KEYl2- 
KEYO2- 
- KEY05 
- KEY01 
EEOC239 
Figure 4-13 SUERSE~Telephone Key Numbers 
-KEY11 
-KEY01 
March 1997 Issue 1 Revision 0 4-49  

Customer Data Entry 
Review List Subform for Form 09 
4.10 This form appears when the REVIEW softkey is pressed in the Station/SUPERSET 
Telephones form or the SU/?E/?SE~Telephone Lines form. This form can be used at 
any time to find where any particular extension number or line appears. When entered 
from the Station/SUf33?SE~form, this form displays a list of all programmed appear- 
ances of the selected extension number. When entered from the Expand Set Subform 
or Expand PKM Subform, the form...