Mitel Sx 200 Ml Pabx Lightware 16 Instructions Guide

Table 4-3 System Options and Timers (continued) 
Option Numbers For 
LIGHTWARE 16 ML System Options / System Timers 
66 CLASS Receivers in SPINE Bay #6 (0..5) 
67 CLASS Receivers in SPINE Bay #7 (0..5) 
100 Mite1 Options Password 
101 System Identity Code 
102 System Type (ML, EL, H) 
103 Maximum Devices 
104 Maximum ACD Agents (Automatic Call Distribution) 
105 Mite1 Application Interface 
106 Automated Attendant 
107 Lodging 
108 Property Management System 
109 Remote Software Download 
Parameters...

Customer Data Entry 
4-32 
ACD Silent Monitoring Beeps: Enables the ACD agent to be notified when being 
monitored by the ACD supervisor. 
Analog Networking SMDR: Enable if SMDR records are to be kept for calls made via 
analog networking. 
ARS Unknown Digit Length Time-out: Sets the time ARS will wait for more digits 
when dialing a digit string which includes a variable-length account code (2 - 60 set). 
Attendant Call Block: Allows call blocking on the system (Hotel/Motel Feature). 
Attendant...

Digit Translation Plan: Chooses one of four available digit translation plans for rotary 
dial signaling. See Digit Translation in the Features Description Practice. 
DISA Answer Timer: Sets the time between seizure of the incoming DISA trunk and 
the provision of dial tone. 
Discriminating Ringing: Enables the Discriminating Ringing feature. 
Discriminating Ringing Always: Causes discriminating ringing to be the normal ring- 
ing pattern for all calls on the system. 
End of Dial Character: Allows the...

Customer Data Entry 
Message Register Follows Talker: Allows the last party connected to a trunk to be 
charged with the register count. 
Message Register Zero After Audit: Allows the system to automatically clear all 
message registers after an audit. 
Message Waiting & Message Register Clear Print: If enabled, a message is printed 
on the default printer whenever a message register is cleared or a message waiting 
is canceled. 
Minimum Flash Timer: Sets the minimum time a set must be on-hook before it...

4.5 This form specifies which tenant groups may be connected together (see Figure 4-5). 
The system allows for a maximum of 25 tenant groups. Each group specifies its own 0 
trunk answering points, attendant answering points and night service status. 6 
3 
> @lo************************ ‘< 02x()*********************** 03~*O********************** ~1 ii 
s 
g 
% 
z 2 
3:29 I’M 9-JfiN-97 alarm status = NO RLflRM 
1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Pi 251 
Switch-hook...

Customer Data Entry 
Softkeys 
TENANT NUM: The TENANT NUM softkey allows a user to select a tenant group by 
number. Press the softkey to display the ENTER TENANT GROUP NUM: prompt. 
Enter the 2-digit tenant number (1 to 25) to display the tenant group with a series of 
‘*’ characters (allow interconnection) and ‘.’ characters (disallow interconnection). Con- 
trol cursor movement on the command line with right and left cursor control keys. 
ALLOW/DISALLOW: This softkey has two functions: it enables or...

Field Description 
Initially, the system inhibits tenant groups from switching each other into night service. 
This condition is indicated by the period (.) character. When the system permits tenant 
groups to switch each other into night service, it is indicated by the asterisk (*) character. 
The tenant group numbers are listed in the header line and the first column. The letter 
(0) functions as a marker and cannot be modified. 
TENANT NUM: The TENANT NUM softkey allows a user to select a tenant group...

Customer Data Entry 
BflY SLT 1 CGT EXT NIJM cm COR TENFINT COMMENTS 
1 
I 
> 1 @# e3 lee3 81 81 01 < 
1 es 12 3eee ei ei ei 
l- 2- 3- 
6-QUIT 7-ERY/SLT/CCT e-DELETE 5- 
e- 
Figure 4-7 Form 07 Layout 
field Description 
EXT NUM: This field displays the extension number of each attendant console. Calls 
directed to the console’s extension number route to softkey 2 on the attendant console. 
COS: This field lists the Class-of-Service number specification for each console (I to 
50). 
COR: This field lists...

Form 08 - Console LDN Assignments 
4.8 
This form specifies the LDN assignments for the consoles (see Figure 4-8). A maxi- 
mum of nine LDN assignments can be programmed for each attendant console. The 
attendant LDNs are assigned to the softkeys. Console softkey 1 is reserved for the 
RECALL function. Each LDN assignment is identified by a directory number. The di- 
rectory numbers are subject to the same constraints as all Listed Directory Numbers 
(i.e., number conflicts are not allowed). If there are...

Customer Data Entry 
console softkey I defaults to RECALL and cannot be modified. The label for console 
softkey 2 defaults to INTERNAL. Softkey 2 is shared between the extension number 
programmed in the DIR NUMBER field and calls directed to the attendant console’s 
extension number (as defined in the EXT NUM field of Form 07, Console Assignments). 
Console softkeys 2 to 10 can be edited. 
COMMENTS: This field further specifies the attendant LDN assignments with text. The 
COMMENTS field has a maximum...