Mitel SX-200 DIGITAL Pabx Information Manual

System Test Procedures 
Extension Reset (Clear All Features) 
4.08 For this test, ensure that COS Option 221, Clear Ail Features, is 
enabled in the class of service of test station “A“. 
CHART 4-12 
EXTENSION RESET (CLEAR ALL FEATURES) 
Step Action Verify 
1 
Enable any type of Call See Call Forwarding (All Types) and Do Not Disturb, above. 
Forwarding, and Do Not 
Disturb at station “A”. 
2 Station “A” lifts handset. Interrupted Dial Tone returned. Station-to-station calls can 
be made at station “A”...

System Test Procedures 
Flash For Attendant 
4.09 For this test, ensure that COS Option 203, Broker’s Call, is 
disabled, and that COS Option 224, Flash For Attendant, is en- 
abled in the Class of Service of the test stations. 
CHART 4-13 
FLASH FOR ATTENDANT 
Step Action Verify 
1 Station “A” lifts handset. Dial Tone returned. 
2 Station “A” dials station “B” Dial Tone removed on first digit dialed. Station “B” rings. 
directory number. Station “A” receives Ringback Tone. 
3 Station “B” lifts handset....

System Test Procedures 
CHART 4-14 
HUNT GROUPS (CIRCULAR) 
Note: Stations “A”, “6” and “C” are assumed to be in a circular hunt in the indicated order. 
Step Action Verify 
‘at-t 1 - Testing Hunt Group Operation. 
1 Station “D” lifts handset. Dial Tone returned. 
2 Station “D” dials Hunt Station “A” rings. Station “D” receives Ringback Tone. 
Group Access Code. 
3 Station “A” answers. Stations “A” and “D” are connected. 
4 Set handsets on-hook. / 
5 Repeat Steps 1 and 2. Station “B” rings. Station “D”...

System Test Procedures 
CHART 4-15 
HUNT GROUPS (TERMINAL) 
Note: 
Stations “A”, “B” and “C” are assumed to be in a terminal hunt group, in the indicated 
order. 
Step Action Verify 
Part 1 - Testing Hunt Group Operation. 
1 Station %” lifts handset. Dial Tone returned. 
2 Station “D” dials Hunt Station “A” rings. Station “D” receives Ringback Tone. 
Group Access Code. 
3 Station “A” answers. Stations “A” and “D” are connected. 
4 Set handsets on-hook. 
5 Repeat Steps 1 through 3. As above. 
6 Set all...

System Test Procedures 
CHART 4-16 
LINE LOCKOUT 
Step Action Verify 
1 Station “A” lifts handset. Dial Tone returned. 
2 Station “A” remains Dial Tone changes to Reorder Tone. 
off-hook. 
3 Station “A” continues to Reorder Tone replaced by silence. Station “A” is locked 
remain off-hook. out. If COS Option 227, Lockout Alarm Applies is enabled, 
a minor alarm is reported at the Attendant Console. 
4 Station “B” lifts handset. Dial Tone returned. 
5 Station “B” dials station “A” Busy Tone returned....

System Test Procedures 
Station Conference 
4.10 
For this test, ensure that COS Option 302, Flash-in Conference, 
is enabled, and that COS Option 224, Flash For Attendant, is 
disabled in the Class of Service for the test stations. 
CHART 4-17 
STATION CONFERENCE 
Step Action Verify 
1 
Station “A” lifts handset. Dial Tone returned. 
2 Station “A” dials station “B” Station “B” rings. Station “A” receives Ringback Tone. 
directory number. 
3 Station “B” lifts handset. Station “A” and station “B” are...

System Test Procedures 
CHART 4-18 
STATION-TO-STATION CALL 
Step Action Verify 
1 Station “A” lifts handset. Dial Tone returned. 
2 Station “A” dials station “B” Dial Tone removed on first digit dialed. Ringback Tone 
directory number. returned when dialing completed, if station “B” is on-hook. 
(If station “B” is off-hook, Busy Tone returned to station 
“A”.) 
3 Station “B” lifts handset. Station “A” and station “B” are connected together. 
4 Set handsets on-hook. Test completed. 
CHART 4-19 
STATION...

System Test Procedures 
5. ATTENDANT CONSOLE TESTS 
General 
5.01 
This Part provides a series of tests to verify the operation of 
the SX-200’ DIGITAL PABX Attendant Console. Refer to Section 
MITLS 108-093-315-NA, Attendant Console Description, and Section 
MITL9108-093-105-NA, Features Description, for details on the fea- 
tures tested in this Part. 
The features tested in this Part are: 
Answering Calls 
Originating Calls 
Call Hold and Retrieve 
Recall 
Serial Call 
Attendant-Controlled Conference...

System Test Procedures 
Step Action 
Part 1 - Internal Source 
CHART 5-l 
ANSWERING CALLS 
Verify 
1 Station “A” lifts handset. Station “A” receives Dial Tone. 
2 Station “A” dials the Dial Tone removed from station “A” and replaced by 
Attendant access code. Ringback Tone. Attendant Console warbler sounds, and 
ANSWER LED flashes. INTERNAL softkey appears. Call 
Waiting indicator (C/W) shows one call waiting. 
3 Attendant presses the Ringback Tone removed from station “A”. Warbler stops. 
ANSWER key....

System Test Procedures 
CHART 5-2 
ORIGINATING CALLS 
Step Action Verify 
1 Attendant dials station “A” Digits appear on LCD display in DST area as they are 
directory number. dialed. ANSWER LED lights. No softkey labels are 
displayed. Station “A” rings. Station “A” data is displayed. 
MSG WAITING and CALLBACK softkeys are displayed. DST 
area shows the message RINGING. Attendant Console 
receives Ringback Tone. 
2 Station “A” answers. Station “A” stops ringing. Ringback Tone removed from 
Attendant...