Home > Mitel > Communications System > Mitel SX 200 DIGITAL Pabx General Descriptions Manual

Mitel SX 200 DIGITAL Pabx General Descriptions Manual

Here you can view all the pages of manual Mitel SX 200 DIGITAL Pabx General Descriptions Manual. The Mitel manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 471

Station Message Detail Recording
l
DATA SMDR -Extended Record: This option, when enabled,
adds the system identifier to the DATA SMDR record.
0DATA SMDR -Overwrite Buffer: This option, when enabled,
will prevent a data call from being blocked due to a lack of data
SMDR buffers; however with buffers being overwritten, there is
no guarantee of recording all data calls.
0DATA SMDR -Indicate Long Calls: This timer, when enabled,
provides an identifying character in column 
1 to indicate the
approximate...

Page 472

SECTION MITL9109-094-221 -NA
Page 42 

Page 473

Station Message Detail Recording
7. OPERATIONAL PARAMETERS ’General
7.01The SMDR feature is transparent to the end user; hence there
are no operational procedures to be employed by the Attendant
or station user. The following provides a summary of the operational
parameters which are described earlier in this document.
Non-Recording Conditions
:’7.02SMDR is not initiated under the following conditions:
aBusy tone is obtained by the Attendant or a station when a
trunk is dialed (because all trunks in the...

Page 474

SECTION MITL9109-094-221 -NA
Incoming Calls
7.04When SMDR is enabled for incoming calls the following con-
ditions are reported:
l
Digits dialed on incoming DID, 
DISA or dial-in tie trunks are
reported in the “Digits Dialed on the Trunk” field. When the
dial-in trunk dials an illegal or vacant number or hangs up
before completing the number, the call is reported. The called
party is the station dialed. The DISA Security Code is not re-
ported.
0The called party is always the Attendant, except when the...

Page 475

Station Message Detail Recording
APPENDIX A
ACCOUNT CODES
General
Al.01 This Appendix provides a general description of account codes
and operation.
Description
Al.02 Account codes uniquely identify SMDR call records for billing
purposes. Two types of account code length options (fixed
length and variable length), can be programmed in the System Options
form during Customer Data Entry. A fixed length account code is
preprogrammed to be of a length between 4 and 12 digits. A variable
length account code...

Page 476

SECTlON MITL9109-094-221 -NA
.Al.06 Forced account codes can also be assigned to 
DISA trunks via
the COS of the special 
DISA trunk in order to force a validation
check on incoming 
DISA calls. System dial tone is not returned to the
caller until a valid independent account code is received.
Operation
Account Code entry at the start of an outgoing call:
lLift handset - dial tone is returned.
lDial the feature access code followed by the account code and
terminator 
(#); the terminator is not required...

Page 477

Station Message Detail Recording
APPENDIX B
DATA ACCOUNT CODES
General
B1.O1 This appendix provides an overview of the Data Account Code
feature. It includes examples of ADL, DTRX, and incoming and
internal modem pooling call applications. For a detailed description of
account codes, refer to Section MITL9109-094-105-NA, Features De-
scription (Data Features section). Data Account Codes are not available
with Generic 1002.
Description
B1.02 With the Data Account code feature, data users can have the...

Page 478

SECTION MITL9109-094-221 -NA
Outgoing and internal Data Calls
61.04 For a DTRX application,the account code access code
“ACCOUNT” and the account code number are entered after the
destination number, in the dialed digit string. The following are exam-
ples of an account code entered by a DTRX caller:
l
CALL 
1234-9-5925678-ACCOUNT-2222
OR
0CALL 1234 9 5925678 ACCOUNT 2222
OR
0CALL 1862-ACCOUNT-2222 (internal DTRX call with account
code)
OR
0CALL 1862 ACCOUNT 2222
(prompt)CALL
1234
- modem pool access...

Page 479

Station Message Detail Recording9- ARS access code
5925678
- directory number of the destination data device
1862
- internal destination data station
Note that dial tone is not returned after the account code is entered.
B1.06 For an internal call via the modem pool, or for an incoming TIE
or 
DISA trunk call, once the trunk has been seized, the account
code access code and the account code number are entered prior to
the destination digit string.
75-2222-1234-1862 (internal modem pooling call with...

Page 480

SECTION MITL9109-094-221 -NA
System Abbreviated Access Code + System Abbreviated Number =
ADL Access Code + Account Code Access Code + Account Code
Number + Destination Number
or
Account Code Access Code + Account Code Number + Destination
Number
For DTRX callers, the Account Code cannot be included in system
abbreviated numbers.
For a Speed Call number, the Account Code Access Number and the
Account Code Number may be included in the digit string.
B1.09 An incoming TIE, DISA, or internal modem pooling...
Start reading Mitel SX 200 DIGITAL Pabx General Descriptions Manual

Related Manuals for Mitel SX 200 DIGITAL Pabx General Descriptions Manual

All Mitel manuals