Mitel SX 200 DIGITAL Pabx General Descriptions Manual

Station Message Detail Recording
CHART 2-1 (CONT’D)TRUNK SMDR PRINTOUTS
CALLED EXTENS 
ICPJ TRANSFER CALL
012
3456789123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
03/12 07:42 00:03:06 T162 “003241T 215000On March 12th at 
7:42 AM, Trunk 162 rang the console and requested to speak to Extension 241.
The Attendant took 3 seconds to answer the call.After speaking to Extension 241, the latter
extension then transferred the call to Extension 215.The total...

SECTION MITL9109-094-221 -NA
Page 12 

Station Message Detail Recording
3. DETAILED DESCRIPTION - DATA SMDR
General
3.01The DATA SMDR feature allows the printing out of detailed
records for external and internal data calls in a format similar to
existing trunk SMDR printouts.
3.02 The major differences between a DATA SMDR record and a
TRUNK SMDR record are: the month and day are separated by a
dash (-) rather than a slash 
(/), and the “Digits Dialed on a Trunk” field
is replaced by three fields; “Data Call Indicator”, “Type of Data Call”,...

SECTSBN MITL9109-094-221 -NA
3.05A summary of the fields printed in a DATA SMDR record is
shown in Table 3-l; many of these fields are the same as in a
TRUNK SMDR report.
3.06A description of fields of the DATA SMDR record as listed in
Table 3-1 follows:
Long Call Indicator (z). This optional field contains a dash (-) for calls
of duration 5 to 9 minutes 59 seconds, a percent symbol (%) for calls
of duration 10 to 29 minutes 59 seconds, a plus symbol (+) for calls of
30 or more minutes, or a space ( )...

Station Message Detail Recording
Reason For Disconnect -this field reports the reason the data call
was terminated. Table 3-2 gives possible reasons for disconnecting a
data call.
Call Completion Status
- has two values; B (Busy) or E (Error).
The busy flag “B” is set if the called party is busy, and the caller
queues for completion to the called 
dataset. If the caller terminates
while in the queue, the busy flag will be set. If the call is completed
after being queued, the busy flag will not be set....

SECTION MITL9109-094-221 -NA
Account Code (aa...a). Account codes are typically used for security
purposes to charge the cost of calls either to internal departmental
cost centers or to project accounts for billing to specific projects. Data
account codes may be optional or a data caller may be forced to enter
an account code when making an internal or an external data call. The
account code may be 
l-12 digits (the default value is six digits).
System Identifier (iii). This optional 3-digit field may...

Station Message Detail Recording
TABLE 3-l (CONT’D)
SUMMARY OF FIELDS IN A DATA SMDR RECORD
FIELD
Spacer
External IndicatorCOLUMNFORMATDEFINITION
68
69-70EXIndicates that this was an external data
call.
Trunk SMDR Indicator
71*
Indicates that there is an associated
SMDR report.
Spacer72
Account Code73-84
aa. . . aa = O-9 space filled; length of 1 -12
digits.
Spacer85
System Identifier (optional)86-88 iii
i= 0 to 9
iii = 000 to 999
000 = “No code Entered”
TABLE 3-2
DATA CALL DISCONNECT REASONS
Reason
ADL...

SECTION MITL9109-094-221 -NA
TABLE 3-2 (CONT’D)
DATA CALL DISCONNECT REASONS_ Reason
DTR DROPPED
HDLC DISC
INACTIVITY
INCOMPATIBLE
INITIAL SETUPExplanation
DTR for one or both parties dropped for longer than the
programmed interval.
Communication has been lost to the 
dataset.Session activity timer expired.
The two data devices are not compatible; one is synchronous,
the other asynchronous.
The call-setup to the data device has failed in the initial stage.
This is an unexpected event and indicates that...

Station Message Detail Recording
TABLE 3-2 (CONT’D)DATA CALL DISCONNECT REASONS
Reason
NO SEIZE ACK
ORIGINATE ONLYExplanation
The trunk used in this outgoing data call did not receive a ‘seize
ack’ from the far end telephone office.
The called party has the “Originate Only” Class Of Service
enabled.
PM: DCD LOThe Pooled Modem is programmed to have DCD as
“Communication Established Indicator” and DCD has NOT come
HIGH after 15 seconds from the 
offhook.PM: DSR LOThe Pooled Modem is programmed to have DSR...

SECTlON MITL9109-094-221 -NA
TABLE 3-2 (CONT’D)
DATA CALL 
DiSCONNECT REASONS
Reason
SYSTEM DISCExplanation
The system has disconnected for one of several reasons, none of
which is a trouble.
The destination is busy and the originator cannot (or did not)
queue.
The connection is not allowed due to invalid tenant
interconnection.
TENANTING
UNDECODABLEThe connection is not allowed due to type of devices involved.
The two data parties are in different tenant groups.
Reason unknown.
JDATA SMDR Call Record...