Mitel SX 200 DIGITAL Pabx General Descriptions Manual

Automatic Route Selection and Toll Control
ARS Maximum Dialed Digits (CDE Form 27)
5.06Countries with open numbering plansrequire an ARS package
that will restrict the user based on the number of digits dialed.
In association with Each Class of Restriction there will be a maximum
number of digits which can be dialed. If the maximum is exceeded, the
call will follow intercept handling for Illegal Number Routing. Form 27
is shown in Table 5-3 and is comprised of two fields as follows:
COR:The COR field...

SECTION MITL91 Q9-Q94-220-NATABLE 5-3
FORM 27 
- ARS MAXIMUM DIALED DIGITS
CDE TERMINAL DISPLAY
CORMAXIMUM NUMBER OF DIALED DIGITS
1
2
3
4
5
6
7
8
9
10
11
12
I
Unlimited
12
9
8
Unlimited
Unlimited
Unlimited
Unlimited
Unlimited
Unlimited
Unlimited
Unlimited’
1Unlimited
1 -UNLIMITED2-3-4-TOP5-BOTTOM
&QUIT7-e-COR9-O-ATTENDANT CONSOLE DISPLAY
CORMAXIMUM NUMBER OF DIALED 
DIGITS
1UNLIMITED
q Fl WNLIMITEDjYJ F2>q F3>q F4>ToPq F5 >BOTTOM
q FG>aulTq F7>BF9>q FO>Page 22 

Automatic Route Selection and Toll Control
ARS Route Plans Table (CDE Form 25)
5.07The SX-200 DIGITAL PABX ARS package accommodates a
maximum of 50 Route Plans, each of which is contained within
a dedicated Route Plans table. The header of each table contains the
Time Zone and the number of the Day Zone which is to be associated
with the Route Plan. When first accessed, Route Plan 1 is displayed. By
selecting the “ROUTE PLAN” softkey, the current route plan is iden-
tified, and the display prompts for...

SECTION MlTL9109-094-220-MATABLE 5-4
FORM 25 
-ARS ROUTE PLANS TABLE
CDE TERMINAL DISPLAY
TiME
ZONE
01
02
03
0405
06
01
TDAY ZONE 1DAY ZONE 2
START HOURROUTE LISTSTART HOUR
6-QUIT
I7-ROUTE NUM
8-DELETE
9-
FtOUTE LISTSTART HOURROUTE LIST DAY ZONE 3
IO-ENTER
ATTENDANT CONSOLE DISPLAY
TIMEDAY ZONE 1DAY ZONE 2DAY ZONE 3
ZONESTART HOURROUTE LISTSTART HOUR
ROUTE LISTSTART HOURROUTE LIST
q F7>COR GROUPq F8>DELETEq Fg>q FO >ENTER
1
1JPage 24 

Automatic Route Selection and Toll Control
ARS Day Zone Definition Table (CDE Form 21)5.11Since telephone call rates vary during the day, and with the
days of the week, the system must be able to select the least
expensive route based on this schedule. The Day Zone Definition table
does this. The week may be broken into a maximum of three zones.
Typically, these are (1) Monday through Friday, (2) Saturday, and (3)
Sunday. The information from this table is used in Route Plan defini-
tion. Refer to Table...

SECTION MITL9109-094-220-NATABLE 5-5
FORM 21
- ARS DAY ZONE DEFINITION
CDE TERMINAL DISPLAY
fDAY ZONE
0102
03
01
1 -DISABLEMON.TUE.
**
ATTENDANT CONSOLE DISPLAY
WED.THU.
*c
FRI.SAT.
**
5-SUN.
tO-ENTER
DAY ZONEMON.TUE.WED.
THU.
FRI.SAT.SUN.
01***
*li*
*
q Fl >DISABLEq F2>q F3>Q F4>q F5>
q F6>QuITq F7>q F8>q FCJ>q FO>ENTERPage 26 

Automatic Route Selection and Toll Control
ARS Route Lists Table (CDE Form 24)
5.13 The Route Lists table contains a maximum of 100 one-line
entries, each of which defines up to six Routes. The Routes
within each entry are listed in the order in which they are to be tried;
i.e., least expensive (Route 1) to most expensive (Route 6). If there are
two or more Routes to a given set of locations, and the order in which
they are to be tried changes with the time of day, because of rate
changes, then two Lists...

SECTION MITL9109-094-220-NATABLE 5-6
FORM 24 
- ARS ROUTE LISTS TABLE
FIRST
SECONDCDE TERMINAL DISPLAY
LIST NUMTHIRDa-rFOURTHNTFIFTHN-r
SIXTH
0102
03
04
05
06
07
08
09
10
11
12
01
l-
-
I-2-3-4-TOP5-BOTTOM
m6-QUIT7-LIST NUM
I8-DELETEI9-IO-ENTER
-
IATTENDANT CONSOLE DISPLAY
LIST NUMFIRSTSECOND WTTHIRD WT
FOURTH WTFIFTHWT SIXTH WT
I01
aFJ>q F2>@F3>q F4>ToPq F!j>BOrrOM
E F~>QUITq F7>LtST NUMq FB>DELETEq FCJ>q F()>ENTERNote:DELETE and ENTER are present only when there is data on the display.
Page 28 

Automatic Route Selection and Toll Control
ARS Route Definition Table (CDE Form 23)
5.16The Route Definition table contains a maximum of 200 one-line
entries. Each entry identifies a route. A Route comprises a Trunk
Group, the COR Group associated with the Trunk Group, and an index
to the Digit Modification Table. The layout of the Route Definition table
is shown in Table 5-7.
5.17The same Trunk Group may be used to create several routes;
for exampie, a call in the U.S.A. may be routed via either the...

SECTION MITL9109-094-220-NATABLE 5-7
FORM23
-ARS ROUTE DEFINITION TABLE
CDE TERMINAL DISPLAY
ROUTE NUMTRUNK GROUPCOR GROUP MOD DIGIT ENTRY
COMMENTS
01
02
03
04
05
06
07
08
09
10
11
12
01
l-2-3- 4-TOP5-BOTTOM6-QUIT7-ROUTE NUM
8-DELETE9-O-ENTERATTENDANT CONSOLE DISPLAY
IROUTE NUMTRUNKGROUPCOR GROUPMOD DIGIT ENTRYCOMMENTSI
q FJ>q F2>q P3>m F!j>BO~OM
q F~>QUITq FT>ROUTE NUMq FB>DELETEq Fg>q FO>ENTERARS Modified Digit Table (CDE Form 22)
5.19The Modified Digit Table contains a maximum of one hundred
l-line...