Mitel SX 200 DIGITAL Pabx General Descriptions Manual

SECTION MITL9109-094-450-NATrunks 
-records activity of each trunk during the measurement period
Trunk Number:List of all trunk numbers that were accessed.
Peg in:Total number of times the trunk was seized for
,incoming.calls(maximum = 255).
Usage in:Represents the usage (in Erlangs or CCS) for
incoming calls on the trunk (maximum = 36
ccs).
Peg Out:Total number of times the trunk was seized for
an outgoing call on the trunk (maximum = 255).
Usage Out:Represents the usage (in Erlangs or CCS) for
outgoing...

Traffic Measurement
3. TRAFFIC MEASUREMENT COMMANDS
Maintenance Terminal and Console3.01The maintenance terminal or console is used to enter the data
required to start traffic measurements, print measurements,
monitor status, or change traffic measurement parameters. Refer to
Section 
MITLS 109-094-35 1 -NA, RS-232 Maintenance Terminal, for
instructions on using the terminal. At the maintenance terminal or
console, select the MAINTENANCE application; from the MAINTENANCE
main menu, select TRAFFIC 
MEAS...

SECTION MITL91 O9-Q94-450-NAissued while traffic measurement is on; it must be 
STOPped and then
restarted.
STOP Command 
- This command causes two softkeys to become
active, and pressing either selects. what is to be
stopped.
TRAFFRPT
- stops the traffic measurement currently active. No
report will be made of the incomplete collected data.
PRINT
- stops a printout being sent to the PRINTER port.
Note:The STOP command will not stop an AUTOPRINT in progress;
othe AUTOPRINT command must be set to OFF...

Traffic Measurement
Installation to meet the Traffic Measurement requirements con-
sists of the following steps:
Determine the required traffic parameters
Determine the required output device
Install the output device
Program the traffic parameters and output device for this in-
stallation. 4. INSTALLATION
General4.01
1.
2.
3.
4.Connection Requirements, Local Printer
4.02Section 
MITL9109-094-200-NA, Shipping, Receiving and Instal-
lation Information, details the installation of 
SX-200 DIGITAL
PABX...

SECTlON MITL9109-094-450-NAPage 12 

Traffic Measurement
5. REPORTS
General5.01The standard report provides a printed report of the data in the
storage registers 
.(usually the measurements taken during the
preceding period). The report includes headings which make the data
easy to read. Three typical reports are printed following:
5.02Port size and system number are unique to each system; they
are entered when the system is 
initally configured. The CHAN-
NELS part of the printout is associated with the maximum port config-
uration. Three...

SECTION MITL9109-094-450-NASX-200 DIGITAL Generic 100X 
XXXP TRAFFIC REPORT
SYSTEM nnn (CONT’D)
I
27-NOV-869:oo to lo:oo
-CHANNELS:
Bay1
2
34
5
6
7
wCONSOLE:
Directory
Number
4900
4888Usage
Max/Avl2.20 ccs
2/1249.60 ccs
4/ 62
3.00 ccs
l/ 31
1.20 ccs
3/ 31
18.10 ccs
61 31
Usage
Max/Avl17.60 ccs
2/12385.90 ccs
6/ 61
344.60 ccs
13/ 94
50.60 ccs
5/ 94
456.40 ccs
18/ 94
43.60 ccs
4/ 94
421.30 ccs
17/ 94
Usage
0.00 ccs
0.00 ccsCallsCalls Waiting
Avg. Waiting
AnsweredUsage
Time 
(set)
00.00 ccs
0.00
00.00 ccs...

Traffic Measurement
TRUNKS:
Number1
2
3
4
520
22
24
26
28
30
32
40
42Peg InUsage In
00.00ccs
00.00ccs
00.00ccs
00.00ccs
00.00ccs
55.10ccs
66.20ccs
61.20ccs
52.10ccs
54.40ccs
44.90ccs
40.90ccs
00.00ccs
00.00ccsPeg Out
Usage Out
21.40 ccs
20.60 ccs
219.90 ccs
00.00 ccs
00.00 ccs
32.40 ccs
40.80 ccs
42.50 ccs
47.70 ccs
43.40 ccs
44.90 ccs
31.80 ccs
00.00 ccs
00.00 ccs
5.03The condensed report contains the data only, in decimal form.
Register numbers, and assignments are known for each particu-
lar software...

SECTION MITL9109-094-450~NA
5.05The following table lists typical business traffic:
Traffic 
TapeLight
Medium
HeavyNumber of PortsTraffic/Port(CCS)Total CCS
2501.4350
300
1.4420
350
1.4490
4001.4560
480
1.4672
250
3.c750
300
2.9870
350
2.91015
400
2.91160
480
2.91392
250
5.51375
300
5.41620
350
5.41890
.4005.42160
480
5.42592Page 16 

9 109-094-620-NA
Issue 3 Revision 1
September, 1989
SX-2000 .DIGlTAL PABX
ACD 7ELEMARKETERTM Application Package
This practice describes the features, operation, and programming of the
ACD 
TELEMAI?KETH?~” Application Package for the SX-2000 Digital Private
Automatic Branch Exchange (PABX).
Practice:
9 
109-094-620-NA
Issue:3
Revision:1
Date :September, 1989
Software Version:
G1003 MR3
Yopyright 1989, MITEL Corporation. All rights reserved,
‘“Trademark of MITEL Corporation
@Registered Trademark of MITEL...