Mitel SX-200 DIGITAL Pabx General Description Manual

Station Message Detail Recording 
long distance calls (identified in the ARS Digit Strings CDE form), 
unless the access attempt is preceded by a valid account code. 
A2.05 Forced account codes can also be assigned to DISA trunks via 
the COS of the special DISA trunk in order to force a validation 
check on incoming DISA calls. System dial tone is not returned to the 
caller until a valid independent account code is received. 
A3. OPERATION 
Account Code entry at the start of an outgoing call: 
8 
Lift...

MITEL STANDARD PRACTICE SECTION MITL9108-093-223-NA 
issue 2, September 1986 
SX-200” DIGITAL 
PRIVATE AUTC9MATlC BRANCH EXCHANGE (PABX) 
ABBREVIATED DIAL 
Copyright of MITEL Corporation 1986 
TM - Trademark of MITEL Corporation 
aRegistered Trademark of MITEL Corporation i  

Abbreviated Dial 
CONTENTS PAGE 
l.GENERAL ........................................ l-l 
Introduction ..................................... l-l 
Reason for Reissue ............................... 
l-l 
2. ABBREVIATED DIAL AND SPEED DIAL DESCRIPTION ....... 2-l 
General ......................................... 2-l 
Personal Speed Dial Description ..................... 2-l 
System Abbreviated Dial Description .................. 2-l 
System Tables ................................... 2-l 
System Abbreviated...

Abbreviated Dial 
1. GENERAL 
Introduction 
1 .Ol This Section contains a description and instructions for using 
both Personal Speed Dial and System Abbreviated Dial. The 
Personal Speed Dial part contains the unique aspects of Speed Dial 
from SUPERSET@ stations. 
Reason for Reissue 
1.02 This Section is reissued to reflect Generic 1000 and Generic 
1001 information for the SX-200’ DIGITAL PABX. 
Page l-l/l  

Abbreviated Dial 
- 
2. ABBREVIATED DIAL AND SPEED DIAL DESCRIPTION 
General 
2.01 Abbreviated Dial is a feature of the SX-ZOO@ DIGITAL PABX 
which allows the user to dial an abbreviated number in place of 
a longer external number. The longer number is substituted for the 
abbreviated number by the SX-200@ DIGITAL PABX during Call Pro- 
cessing. The Abbreviated Dial feature requires the programming of 
tables either by the Attendant or during Customer Data Entry (CDE) in 
the case of System Abbreviated...

Abbreviated Dial 
(d) A maximum of up to 1000 abbreviated dial entries may be 
assigned in the table (000-999). 
(e) Partial numbers, in which the user is required to dial digits 
manually, may be stored. When entered as part of a digit string, 
~3 informs the system that manually dialed digits are expected. 
The number of digits to be manually dialed follows the ~3 
command, and must be in the range 01 to 14. The terminator 
~5 informs the system that the number is to be treated as an 
intercom number....

Abbreviated Dial 
3. PROGRAMMING 
Personal Speed Dial 
3.01 The acticns required to set up a Personal Speed Dial list are 
outlined in the following paragraphs. The SUPERSET qTM user 
has a visual indication of the validity of any entry. 
SUPERSET@ Set 
3.02 The SUPERSET qTM user may define up to 14 “speed call” keys, 
and the SUPERSET 3TM user may define up to 12 “speed call” 
keys, depending upon the number of line appearances on the set. The 
procedure for entering a Speed Dial number into the list is...

Abbreviated Dial 
TABLE 3-1 
DEFINING PERSONAL SPEED DIAL KEYS - SUPERSET@ Set 
Step Action 
Remarks 
1. Press PROGRAM feature key. 
2. 
3. 
4. 
5. 
6. Press SPEED CALL feature key. 
Press unused line select key. 
Press PRIVACY coftkey 
(SUPERSET qTM set). 
Enter speed call number. 
Check entry. 
7. Press SAVE feature key. Handset should remain on-hook during 
entire sequence. 
If number is not to be displayed. 
Number is displayed on alphanumeric 
display. 
Speed call number is stored against 
selected...

MITEL STANDARD PRACTICE 
SECTION MITL9108-093-230-NA 
issue 2, September 1986 
SX-200” DIGITAL 
PRIVATE AUTOMATIC BRANCH EXCHANGE (PABX) 
TENANTING 
Copyright of MITEL Corporation 1986 
@ Re9istered Trademark of MITEL Corporation 
TM - Trademark of MITEL Corporation  

Tenanting 
CONTENTS PAGE 
1. INTRODUCTION .................................... 
l-l 
Reason for Reissue ............................... 
l-l 
2. GENERAL DESCRIPTION ............................. 
2-l 
Overview 
........................................ 2-l 
independent Consoles, Trunks, and Stations ............ 2-l 
Tenant Interconnection ............................ 
2-l 
Identifying Tenants on Consoles and SUPERSET@ Sets .... 2-2 
Local Night Switching ............................. 
2-4 
Night...