Mitel SX-200 DIGITAL Pabx General Description Manual

Automatic Route Selection and Toll Control
COR GROUPCOR GROUP MEMBERS (SEPARATE WITH SPACES)COMMENTSCDE TERMINAL DISPLAYTABLE5-1
COR GROUP DEFINITION TABLE
0102
03
04
05
06
07
08
09
10
11
12ATTENDANT CONSOLE DISPLAY
COR GROUP
01
q j=J>
H F~>QUITCOR GROUP MEMBERS (SEPARATE WITH SPACES)COMMENTS
q F2>q F3>q F~>TOPq Fs>BOTTOM
q Fi’XoR GROUPq F8>DELETEq Fg>B FO>ENTER
IComments:This programmable field is used by the program-
mer to enter any 20-character-long reminder against each
Group Number.
ARS Day Zone...

Automatic Route Selection and Toll Control
Sunday. The information from this table is used in Route Plan defini-tion.5.06The system allows for one definition of three Day Zones. The
Day Zone Definition table accommodates this feature. The table
has eight fields:
Day Zone:This is a nonprogrammable field which lists the
zone numbers 1 through 3.
Mon-Sun:These seven programmable fields either ENABLE
(shown by 
“*‘I)or DISABLE (shown by a blank) a given Day Zone
on a given day of the week. Positioning the...

Automatic Route Selection and Toll Control
TABLE 5-2
ARS DAY ZONE DEFINITION
CDE TERMINAL DISPLAY
DAY ZONE0102
03
MON.TUE.WED.THU.FRI.SAT.
l-
2-
6-QUIT7-8-DELETE9-O-ENTER
ATTENDANT CONSOLE DISPLAY
3-4-5-
SUN.DAY ZONEMON.TUE.WED.THU.
FRI.SAT.SUN.
01
Fl >DISABLEq F2>mF3>q F4>q F5>
q Ffj>QUlTq F7>H F~>DELETEq F9>q FO >ENTER
IARS Modified Digit Table (CDE Form 22)
5.07 The Modified Digit Table contains a maximum of fifty l-line
entries. These are sequences indexed through a numerical in-
dex, 1 through 50,...

Automatic Route Selection and Toll Control
to how digits are to be inserted into or deleted from the dialing
sequence. For example: An FX trunk is installed between two cities,
permitting calls to be placed between the two as if they were local
calls. A caller in one of the cities placing a call to the other city would
dial the distant area code, unaware that the system will automatically
select the FX routing for the call. The Modified Digits Table would
therefore instruct the system to delete the...

Automatic Route Selection and Toll Control
TABLE 5-3
ARS MODIFIED DIGIT TABLE
ENTRY NUMQTY TO DELETEDIGITS TO BE INSERTEDCOMMENTS CDE TERMENAL DISPLAY
01
02
0304
05
06
07
08
09
10
11
12
01
l-2-4-TOP
6-QUIT
-/-ENTRY [VUMATTENDANT CONSOLE DISPLAY
1ENTRY NUMQTY TO DELETEDIGITS TO BE INSERTED
COMMENTS
I01
HFl>q F2>q P3>q F4>ToPq FS>BOTTOM
q Ffj>QUl;-q FTP>ENTRY NUMq F~>DELETEq Fg>H FO>ENTERARS Route Definition Table (CDE Form 23)
5.10The Route Definition table contains a maximum of 200 one-line
entries. Each...

Automatic Route Selection and Toll Control5.11The same Trunk Group may be used to create several routes;
for example, a call in the U.S.A. may be routed via either the
primary or secondary Specialized Common Carrier service (SCC). Also,
COR Groups may be varied, so that different COR Groups are assigned
to the same Trunk Group. Because of these variations, more Routes
are required than Trunk Groups. The 
SX-200@ DIGITAL PABX therefore
allows for programming of up to 200 Routes, thus allowing for a...

Automatic Route Selection and Toll Control
TABLE 5-4
ARS ROUTE DEFINITION TABLE
CDE TERMINAL DISPLAY
ROUTE NUMTRUNK GROUPCOR GROUPr10D DIGIT ENTRYCOMMENTS
0102
0304
05
08
07
08
09
10
1112
01
l-2-3-
4-TOP5-BO-ITOM
G-QUITT-ROUTE NUM8-DELETE9-O-ENTER
ATTENDANT CONSOLE DISPLAY
ROUTE NUM
01TRUNKGROUPCOR GROUPMOD DIGIT ENTRY
COMMENTS
q fFJ>q F2>HF3>q F4>ToPH F~>BOTTOM
q F~>QUITf4 F~>ROUTE NUM&I F~>DELETEHFCJ>q FO>ENTERPage 5-g 

Automatic Route Selection and Toll Control
ARS Route Lists Table (CDE Form 24)
5.13 The Route Lists table contains a maximum cf 100 cne-line
entries, each of which defines up to six Routes. The Routes
within each entry are listed in the order in which they are to be tried:
i.e., least expensive (Route 
1) to most expensive (Route 6). If there are
two or more Routes to a given set of locations, and the order in which
they are to be tried changes with the time of day, because of rate
changes, then two...

Automatic Route Selection and Tall Control
CDE TERIvliNAL DISPLAY
LIST NUM
0102
03
04
05
06
07
08
09
10
11
12
01
l-
FIRSTTABLE 5-5
ARS ROUTE 
LfSTS TABLE
SECONDFOURTH
4-TOPFIFTH
WTSIXTH
5-BOTTOM
7-ROUTE NUM8-DELETEO-ENTER
AmENDANT CONSOLE DISPLAY
LIST NUMFIRSTSECOND WTTHIRD WTFOURTH 
WTFIFTHWT SIXTH WT
I01
HFl>m/=2>q F3>q F~>TOPq F!j>BOTTOM
H F~>Q(JIT@ FT>ROUTE NUMq FI)>DELETEq Fg>q FO >ENTERPage 5-11 

Automatic Route Selection and Toll Control
ARS Route Plans Table (CDE Form 25)
5.16 The SX-2OOa ARS package accommodates a maximum of 50
Route Plans, each of which is contained within a dedicated
Route Plans table. The header of each tabie contains the Time Zone
and the number of the Day Zone which is to be associated with the
Route Plan. When first accessed, Route Plan 1 is displayed. By select-
ing the “ROUTE PLAN” 
sof-tkey, the current route plan is identified, and
the display prompts for the route...