Mitel SMART L CALL CONTROLLER Hardware Installation Manual

Table 6-7, String Data Entry Changes 
SECTION MITL8350-047-102-NA 
Register I Default 
Description 
602 504156 
615 & 655 #a5327 
625, 635, 645, 665, 675, and #8533#62*427 
685 
Dial 
r Hear 
252 
254 
625 
Machine Identifier (PAV in 
ASCII) 
Access Control Sequences for 
Routes 0 
and 4 
Access Control Sequences for 
Routes 1, 2, 3, 5, 6, and 7 re- 
spectively. 
PROGRAMMING EXAMPLES 
6.40 
Table 6-6 below lists some programming examples. These ex- 
amples only cover programming of the registers...

SECTION MITL8350-047-102-NA 
Table 6-8 (Cont’d), Programming Examples (PAV) 
Dial 
826 
826 
826 
Dial 
L 
Hear _ 
P 
J 
b 
Hear 
P 
Dial 
123456&k& 
654321## 
626262## Hear Description 
Allows a user dialed Account 
Code of 123456. 
Allows a user dialed Account 
Code of 654321. 
Allows a user dialed Account 
Code of 626262. 
Repeat the 826 sequence until all 
of the employees 6 digit codes 
have been added. 
PAV LIST MAINTENANCE EXAMPLE 
6.42 Table 6-9 
below lists an End-user PAV List Maintenance Exam-...

SECTION MITL8350-047-102-NA 
6.44 Table 6-10 below lists the digits required for Speed Call entries 
where ‘n’ is the number or location (bin) of the Speed Call 
Number. If 10 Speed Call entries are used, ‘nn’ is 00 through 09. If 100 
Speed Call entries are used, ‘nn’ is 00 through 99. If 1000 Speed Call 
entries are used, ‘nnn’ is 000 through 999. ‘d’ is the key used to 
determine the trunk(s) that have access to the particular Speed Call 
Number. ‘k’ is the Network Override Key that is used to select...

SECTION MITL8350-047-102-NA 
Table 6-10 (Cont’d), Speed Call Entries 
DIAL DEFINITION 
k is the network override: 
0 - 3 Force on Route #O - #3. 
4 - 7 Force on Route #4 - 7. 
8 Use search table to determine routing. 
9 Dial immediate, no Route # (transparent). 
mm...mm is the phone number. If the % is entered, 
the digits after the * are considered to be Account 
Code (‘p’s). 
## enters the Speed Call Number into the Dialer’s 
memory. 
7nn## 
7nnn## 
I 
Delete speed dial entry nn (100 entries). 
Delete...

SECTION MITL8350-047-102-NA 
803 *#9#9#9## Deletes defaulted *nn 
804 *#9#9#9#2## Programs Xnnn into Dialer 
6.47 If ‘OOOt’ is set to ‘0’, the programming slot number is still two 
digits. This must be within the range of 00 through 09. A single 
digit Speed Call Trigger (i.e., 802 H9#2) is possible for the Search 
Tables, but must be programmed within the range of 700 through 709 
in the Speed Call slots. .. 
. . 
. . .’ 
6.48 The maximum length of the Speed Call field is 30 characters (29 
digits and a...

SECTION MITL8350-047-102-NA 
7. CONTROLLER MEMORY CAPACITY 
7.01 The PAV useable memory consists of an 8K X 8 bit battery 
backed up Random Access Memory (RAM) chip that is capable 
of holding approximately 14,500 characters. This memory area is avail- 
able for the storage of parameters and data at programming time. The 
rest of the available space is used for program execution overhead. 
7.02 It is unlikely that a programmer will completely fill the RAM 
area with data. In the event that memory space...

SECTION MITL8350-047-102-NA 
3) 
4) 
5) 
Note: 
7.06 An entry of ‘803 #9#9#9#2’ is six digits plus two action digits 
for a total of eight memory spaces. 
An Account Code entry (parameters 821 through 835) occupies 
the number of spaces equal to the length of the template 
(account code) plus the action digits. The account code ‘12345’ 
with an action of ‘valid account code, allow call’ would be 
programmed as ‘825 12345 ##’ and would require six spaces. 
The ‘825’ and ‘##’ entries are not counted. 
A...

SECTION MITL8350-047-102-NA 
7x + 13x = 14,500 
20x = 14500 
14500 
x= 20 
X = 725 
Therefore, 725 five digit account codes and 725 seven digit speed calls 
numbers may be safely stored in the RAM memory. 
7.09 Another example would be to assume that there will be twice 
as many account codes as speed call numbers. Account codes 
are still 5 digits long and speed call numbers are 7 digits long: 
(5 + 2)2X + (7 + 6)X = 14,500 
(7)2X + 13X = 14,500 
14x + 13x = 14500 
27X = ‘I4500 
14500 
x= 27 
x = 537...

SECTION MITL8350-047-102-NA 
SEARCH TABLES 
Parameters 801 - 815 
Length+1 X Qty. Subtotal 
Total Space 
Figure 7-1, Calculation Sht. 1 Length+2 ACCOUNT CODES 
Parameters 821 - 835 
X Qty. 
Total Space Subtotal 
Figure 7-2, Calculation 
Sht. 2 
Page 44  

1. 
SECTION MITL8350-047-102-NA 
SPEED CALL NUMBERS 
7nnn Entries 
Length+6 X my. Subtotal 
Total Space 
Figure 7-3, Calculation Sht. 3 
Page 45