Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Performance Management Release 2.0 User Guide
Lucent Technologies DEFINITY Performance Management Release 2.0 User Guide
Have a look at the manual Lucent Technologies DEFINITY Performance Management Release 2.0 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY Performance Management User Guide, Release 2.0, 585-229-808 6Specify Collection ParametersSpecify Default Data Collection Hours Issue 1 November 1998 Page 101 Specify Default Data Collection HoursIntroduction This procedure describes how to specify the default days and times Performance Management should collect data for the entire Performance Management system. These are the default values that will used unless custom values have been specified for a specific managed node as described in Specify Collection Hours for a Specific Managed Node on page 104 . Retrieve Stored Data To retrieve stored data, go to Chapter 7, Administer Reports . Procedure To specify default collection hours, do the following:1Click Performance Management > Data Collection Defaults . Result: Displays the Data Collection Defaults pane, with the Collection Hours Tab displayed.
DEFINITY Performance Management User Guide, Release 2.0, 585-229-808 6Specify Collection ParametersSpecify Default Data Collection Hours Issue 1 November 1998 Page 102 2 Do any of the following: • To turn the collection on, put a checkmark in the On box next to the appropriate days of the week by clicking in the box. To turn the collection off, remove the checkmark by clicking on the box that has the checkmark for the appropriate days of the week. • To specify the start or stop time for the collection, click in the Start or Stop time box and type a new time in military hours, or click the up or down arrow keys to move up or down in hourly increments.
DEFINITY Performance Management User Guide, Release 2.0, 585-229-808 6Specify Collection ParametersSpecify Default Data Collection Hours Issue 1 November 1998 Page 103 Note: Since collection times are hourly, you cannot specify minutes. 3Click Save to save the settings, or make changes to each tab as necessary and then click Save .
DEFINITY Performance Management User Guide, Release 2.0, 585-229-808 6Specify Collection ParametersSpecify Collection Hours for a Specific Managed Node Issue 1 November 1998 Page 104 Specify Collection Hours for a Specific Managed NodeIntroduction This procedure describes how to specify what days and times Performance Management should collect data for a specific managed node. Once you specify collection hours for a specific managed node, those are the current values until changed. Retrieve Stored Data To retrieve stored data, go to Chapter 7, Administer Reports . Procedure To specify collection hours, do the following:1Click DEFINITY Systems > [specific DEFINITY] > Data Collection > Collection Parameters . Result: Displays the Collection Parameters pane for the managed node you want to collect data for.
DEFINITY Performance Management User Guide, Release 2.0, 585-229-808 6Specify Collection ParametersSpecify Collection Hours for a Specific Managed Node Issue 1 November 1998 Page 105 2 Do you want to collect data for this managed node? • If yes, put a checkmark in the box next to the Collection on field by clicking Collection on . • If no, leave the box blank.
DEFINITY Performance Management User Guide, Release 2.0, 585-229-808 6Specify Collection ParametersSpecify Collection Hours for a Specific Managed Node Issue 1 November 1998 Page 106 3 Do one of the following: • To use the default values set up for the entire DEFINITY system, click Use default values . You cannot change any of the collection values if this option is selected. • To specify specific collection values for this managed node, click Use custom values . When you select this option, the collection days are enabled so that you can select which days to collect. 4Do any of the following: • To turn the collection on or off for a day of the week, click the On box for any of those days. • To specify the starting or stop time for the collection, click in the Start or Stop time box and type a new time in military hours, or click the up or down arrow keys to change the time in hourly increments. Note: You can only specify collection times in hourly increments. 5Click Save to save the settings, or make changes to each tab as necessary and then click Save .
DEFINITY Performance Management User Guide, Release 2.0, 585-229-808 6Specify Collection ParametersSpecify Default Data Types Issue 1 November 1998 Page 107 Specify Default Data TypesIntroduction This procedure describes how to specify the types of default data to collect for the entire Performance Management system. Although the data types selected here will be the default types for the entire DEFINITY system, you can change the data types for a specific managed node as described in Specify Data Types for a Specific Managed Node on page 109 . Depending on what is supported by the managed node you are trying to measure, you can collect data on the following basis: •Hourly • Daily peaks • Weekly peaks Retrieve Stored Data To retrieve stored data, go to Chapter 7, Administer Reports . Procedure To specify default data types of data to collect, do the following:1Click Performance Management > Data Collection Defaults . Result: Displays the Data Collection Defaults pane. 2Click the Data Types tab. Result: Displays the Data Types tab.
DEFINITY Performance Management User Guide, Release 2.0, 585-229-808 6Specify Collection ParametersSpecify Default Data Types Issue 1 November 1998 Page 108 3 Put a check mark next to each data type you want to report on by clicking in the appropriate box. Note that for some data types you can also select peaks on an hourly, daily, or weekly basis.4Click Save to save the settings, or make changes to each tab as necessary and then click Save .
DEFINITY Performance Management User Guide, Release 2.0, 585-229-808 6Specify Collection ParametersSpecify Data Types for a Specific Managed Node Issue 1 November 1998 Page 109 Specify Data Types for a Specific Managed NodeIntroduction This procedure describes how to specify the data types to collect for a specific managed node. Depending on what is support by the managed node you are trying to measure, you can collect data on the following basis: •Hourly • Daily peaks • Weekly peaks Retrieve Stored Data To retrieve stored data, go to Chapter 7, Administer Reports . Procedure To specify data types for a specific managed node, do the following:1Click DEFINITY Systems > [specific DEFINITY] > Data Collection > Collection Parameters . Result: Displays the Collection Parameters pane for the managed node you want to collect data for. 2Click the Data Types tab. Result: Displays the Data Types tab.
DEFINITY Performance Management User Guide, Release 2.0, 585-229-808 6Specify Collection ParametersSpecify Data Types for a Specific Managed Node Issue 1 November 1998 Page 110 3 Do you want to collect data for this managed node? • If yes, click Collection on . • If no, leave the box blank. If you select no, you will not have any data to report on.