Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-9 Preliminary Procedures 
3
Check Software Release Letter
1. Check the Software Release Letter that ac c omp anies the Release 8 
removab le media. This letter c ontains the rec ommend ed  up g rade 
proc edures. Always use the 
Software Release Letter when up g rad ing  a 
system. 
2. If the letter is not inc lud ed  with the Release 8...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-10 Release 5/6si to Release 8r 
3
Release 5/6si to Release 8r
During  the wiring  of the PPN installation, lab el the MDF with the new PN numb er 
of the Release 5/6si PPN. The STS software up g rad e assigns the next PN numb er 
(after the hig hest numbered  PN in the Release 5/6si system) to the up g rad ed  
Release 8r EPN.
Required...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-11 Release 5/6si to Release 8r 
3
Required Hardware
The eq uip ment in Table 3-2 must be on-site before the upgrade begins.
Table 3-2. Required Hardware
Equipment Description Quantity
J58890N Expansion Control Cab inet 1
106647985 TN775B Maintenance circ uit p ac k  1
103281788 TN570 Exp ansion Interface circuit p ack Dep end s on reliab...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-12 Release 5/6si to Release 8r 
3
Follow Routine Preventive Maintenance
1. During  the up g rad e, follow routine p reventive maintenanc e p roc ed ures on 
the system to b e up g rad ed . For more information, refer to the “ Preventive 
Maintenanc e”  sec tion in 
DEFINITY Enterp rise Communic ations Server 
Release 8 Maintenanc e for...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-13 Release 5/6si to Release 8r 
3
Shut Down DEFINITY LAN Gateway System
!WARNING:
Neg lec ting  to shut d own a DEFINITY LAN Gateway assemb ly b efore 
p owering  d own the system c ab inet c an d amage the LAN Gateway d isk.
1. Log  onto the DEFINITY LAN Gateway. See the DEFINITY Communic ations 
System Generic  3 Installation, Ad...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-14 Release 5/6si to Release 8r 
3
Disconnect Power and Ground
1. Disc onnec t the c ab inet p ower c ord s from the rear of eac h c ab inet.
2. Disconnect the 10 AWG (#25) (2.6 mm
2) c oup led b ond ing  c ond uc tor wire.
3. Disc onnec t the 6 AWG (#40) (4.1 mm
2) c ab inet g round  wire from the 
g round  b ar in the c ab inet.
Install...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-15 Release 5/6si to Release 8r 
3
Disconnect TDM/LAN Cables and ICC Cables
1. Remove and  retain all of the TDM/LAN c ab les. 
2. If the Release 5/6si system is stand ard  reliab ility, remove and  retain the 
ICC c ab les.
3. If the Release 5/6si system is duplicated, remove the ICC cables. They are 
rep lac ed  with new ICC c ab les...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-16 Release 5/6si to Release 8r 
3
Install Circuit Packs
1.Rep lac e the c irc uit p ac ks and  power supp lies in p ort c ab inets “ C”  and  “ D”  
if they were p reviously removed .
2. Using  the lab el on the front of the c arrier and  the annotated  “ list 
c onfig uration all”  (provid ed  with the Release 8r removab le med ia),...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-17 Release 5/6si to Release 8r 
3
Figure 3-1. Cabinet Address Plug Location Figure Notes
1. Ad dress Plug  (Shown Set to Carrier D)
2. Carrier B Jump er Loc ation (Default)
3. Carrier C Jumper Location
4. Rig ht Edg e of Bac kp lane5. Rig ht Ed g e of Cabinet
6. Bac kp lane Slot 00
7. To Connec tor Panel 
3
45
1
6
2
7
add_plug CJL 050906 

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-18 Release 5/6si to Release 8r 
3
Install TDM/LAN Bus Terminators
1. If the Release 5/6si PPN has only 1 c ab inet, install the 2 AHF110 TDM/LAN 
b us terminators p er Figure 3-2
.
Figure 3-2. TDM/LAN Bus Terminators for Single-Carrier Cabinet EPN
2. If the Release 5/6si PPN has more than 1 c abinet:
a. Install the AHF110 TDM/LAN b us...