Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5r/R6r/R7r to R8r without Adding Memory 
2-11 Upgrade the software and hardware 
2
Remove the Circuit Packs
NOTE:
More detailed  information on removing and  add ing  c irc uit p ac ks is in 
Chapter 6, ‘‘Adding or Removing Cabinet Hardware’’
.
1. Remove the b lank fac ep late next to the MSSNET slot in the c arrier.
2. Remove the UN332B circuit pack from the carrier and place...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5r/R6r/R7r to R8r without Adding Memory 
2-12 Upgrade the software and hardware 
2
5. Plac e the formatted  removab le med ia, lab el fac ing  left, into the op tic al 
drive.
NOTE:
Make sure the formatted removab le med ia is not write-p rotec ted 
b efore p lac ing  it into the op tic al drive 
(see Figure 2-2).
Figure 2-2. Make sure the disk is not write-protected....

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5r/R6r/R7r to R8r without Adding Memory 
2-13 Upgrade the software and hardware 
2
.
Figure 2-3. Do not touch the disk inside the cartridge.
Power Up the Processor Carrier
1. To restore p ower to the p roc essor c arrier, insert the p ower p lug  on the 
right side of the c arrier then insert the p ower p lug  on the left sid e of the 
carrier.
If hig h or c ritic al reliab...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5r/R6r/R7r to R8r without Adding Memory 
2-14 Upgrade the software and hardware 
2
Verify Interchange (H/C only)
1. Type status spe
 and press En t e r to make sure the stand b y sid e is read y for 
interc hange:
nTh e  Standby Refreshed
 field  shows yes
nTh e  Standby Shadowing
 field  shows on
nTh e  Standby Handshake
 field  shows up
I f  t h e  s t a n d b y  SPE d o e s...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5r/R6r/R7r to R8r without Adding Memory 
2-15 Upgrade the software and hardware 
2
Save Translations
1. Type save translations tape 
and press En t e r  to save translations to the 
new removab le med ia, whic h takes ab out 2 minutes.
Save Announcements (if necessary)
1. Type save announce
 tape
 and press En te r to save announc ements to the 
new removab le med ia.
Restore...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5r/R6r/R7r to R8r without Adding Memory 
2-16 Upgrade the software and hardware 
2
For hig h or c ritic al reliab ility:
1. Type upgrade software G3V8r.xx.x.xxx.x no-calls 
(entire alp hanumeric  
string  of new software version) and  p ress 
En te r. At the prompt, press En t e r 
to save translations and  attemp t to p reserve c alls ac ross the interc hang e.
For all...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5r/R6r/R7r to R8r without Adding Memory 
2-17 Upgrade the software and hardware 
2
2. Type the appropriate start and stop information in the Change Day
, 
Month
, Date
, Time
, and  Increment
 field s for eac h rule. (for examp le, 
1:00
 eq uals one hour) 
NOTE:
You c an c hang e any rule exc ep t rule 0 (zero). You c annot delete a 
d aylig ht saving s rule if it is in use on...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5r/R6r/R7r to R8r without Adding Memory 
2-18 Upgrade the software and hardware 
2
2. Typ e the d ay in Eng lish (Sund ay throug h Saturd ay) in the Day of the 
Week:
 field. See Table 2-3
 for Eng lish d ay names When done, p ress Ta b to 
move to next field .
3. Typ e the c urrent month in Eng lish (January throug h Dec emb er) in the 
Month:
 field . See Table 2-4
 for Eng...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5r/R6r/R7r to R8r without Adding Memory 
2-19 Upgrade the software and hardware 
2
8. Type standard
 or daylight savings
 in the Type
 field , ac c ord ing  to the 
c urrent time in the loc al time zone. For examp le, if c urrently on stand ard  
time, typ e standard
.
9. Typ e the rule numb er in the Daylight Savings Rule
 field .
10. When all the information is c orrec t, p...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5r/R6r/R7r to R8r without Adding Memory 
2-20 Upgrade the software and hardware 
2
Enable Customer Options and Alarm Origination 
to INADS
1. Get the DOSS order number of the upgrade from the project manager and 
ask the reg ional Customer Software Ad ministration to c omp lete the step s 
in the shad ed  b ox. See ‘‘Where to Call for Tec hnic al Sup p ort’’ on p ag e -xx
 
for...