Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 31

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory 
1-5 Task Tables 
1
Verify Interchange (H/C only)1-15
Upgrade other carrier (H/C only)1-15
Affix position label(s)1-15
Verify software version1-16
Save Translations1-16
Save Announcements (if necessary)1-16
Restore Disk1-16
Upgrade Software1-17
Reset SPE status (H/C only)1-17
List Configuration Control1-17
Set Daylight Savings Rules1-18
Set...

Page 32

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory 
1-6 Upgrade the software and hardware 
1
Upgrade the software and hardware
Check SPE
1. Type status spe
 and press En t e r to c hec k the health of the SPE. 
For hig h or c ritic al reliab ility systems:
nTh e  Standby Refreshed
 field  shows yes
nTh e  Standby Shadowing
 field  shows on
nTh e  Standby Handshake
 field  shows up
Save...

Page 33

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory 
1-7 Upgrade the software and hardware 
1
Disable Scheduled Maintenance and Alarm 
Origination to INADS
1. To p revent sc hed uled  d aily maintenanc e from interfering  with the up d ate 
or up g rad e, typ e change system-parameters maintenance
 and  p ress 
En t e r.
2. If sc heduled maintenanc e has b eg un, set the Stop Time
 field  to...

Page 34

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory 
1-8 Upgrade the software and hardware 
1
If hig h or c ritic al reliab ility:
1. Type configure tape spe-a large
 and press 
En t e r to rec onfig ure the 
removable media in c ontrol c arrier “ A”  for 2 TN1650B Memory c irc uit 
p ac ks. This c ommand  takes ab out 1 minute to c omp lete.
2. Type configure tape spe-b large
 and  p ress...

Page 35

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory 
1-9 Upgrade the software and hardware 
1
Install Disk Drive (if not TN1657 V4 or earlier)
!CAUTION:
When rep lac ing  any hardware, b e sure to g round  yourself against 
elec trostatic  d isc harg e (ESD) b y wearing  a g round ed  wrist strap .
!CAUTION:
If a hig h or c ritic al reliab ility system, rep lac e and  restore the d isk d...

Page 36

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory 
1-10 Upgrade the software and hardware 
1
Check TTI Status 
1. Type status TTI
 and  p ress En te r. Wait until the Percent Complete
 field  
shows 100%
.
Busyout MMI Circuit Packs (H/C only)
!CAUTION:
Multimed ia-to-voic e station c alls are not p reserved  on an up g rade. Failure to b usy-out 
the TN787 Multimed ia Interfac e (MMI) c...

Page 37

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory 
1-11 Upgrade the software and hardware 
1
Check the active tone-clock (H/C only)
1. Type status port-network 1
 and  verify that the Tone-Cloc k is in the same 
c a r r ie r a s  t h e  a c t i v e  SPE a n d  t h a t  t h e  Service State
 field  shows in
.
NOTE:
This takes 1 minute to c omp lete. If the servic e state is inc orrec t,...

Page 38

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory 
1-12 Upgrade the software and hardware 
1
Install the Circuit Packs
NOTE:
To p rop erly seat a c irc uit p ac k, p ush firmly on the front of the fac eplate until 
the latc h reac hes the b ottom rail of the c arrier. Then c lose the latc h until it is 
fully engaged.
1. Insert the TN1650B memory c irc uit p ac k in memory slot 3.
NOTE:
If...

Page 39

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory 
1-13 Upgrade the software and hardware 
1
6. Plac e the formatted  removab le med ia, lab el fac ing  left, into the op tic al 
drive.
NOTE:
Make sure the formatted removab le med ia is not write-p rotec ted 
b efore p lac ing  it into the op tic al drive 
(see Figure 1-2).
Figure 1-2. Make sure the disk is not write-protected.
!CAUTION:...

Page 40

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory 
1-14 Upgrade the software and hardware 
1
Figure 1-3. Do not touch the disk inside the cartridge.
Power Up the Processor Carrier
1. To restore p ower to the p roc essor c arrier, insert the p ower p lug  on the 
right side of the c arrier then insert the p ower p lug  on the left sid e of the 
carrier.
If hig h or c ritic al reliab ility:...
Start reading Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

All Lucent Technologies manuals