Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-29 Release 5/6si to Release 8r 
3
For 2 Collocated Expansion Port Networks
1. Behind  p ort c arrier D of the multic arrier PPN:
a. Install a lig htwave transc eiver on the c onnec tor at slot 1D02.
NOTE:
Attenuators may be required for single mode fiber using a 
300A Lightwave Transc eiver
b . Connec t 1 end  of the ap p rop riate fib...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-30 Release 5/6si to Release 8r 
3
4. Behind control cabinet A of EPN stack 3:
a. Install a lig htwave transc eiver on the c onnec tor at slot 3A02.
NOTE:
Attenuators may be required for single mode fiber using a 
300A Lightwave Transc eiver
b . Connec t the other end  of the fiber op tic  c able from the PPN to the 
lig htwave transc...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-31 Release 5/6si to Release 8r 
3
Figure 3-10. Fiber Optic Connections PPN to EPN1
For 1 or 2 Fiber-Remoted Expansion Port Networks
1. Behind  p ort c arrier C of the multic arrier PPN. See Figure 3-9 and Figure 
3-11:
a. Install a lig htwave transc eiver on the c onnec tor at slot 1C02.
NOTE:
Attenuators may be required for single mode...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-32 Release 5/6si to Release 8r 
3
2. Behind control cabinet A of EPN stack 2:
a. Install a lig htwave transc eiver on the c onnec tor at slot 2A01.
NOTE:
Attenuators may be required for single mode fiber using a 
300A Lightwave Transc eiver
b . Connec t a fib er c able to the transc eiver just installed .
c . Route the fib er c ab le d...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-33 Release 5/6si to Release 8r 
3
Interconnect Port Networks with Fiber Cabling —
Critical Reliability Release 8r
1. Keep  trac k of whic h fib er attac hes to whic h c onnec tor on eac h lig htwave 
transc eiver. This sec tion p rovid es fig ures showing  typ ic al ways of making  
these connec tions.
The c onnec tors on the lightwave...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-34 Release 5/6si to Release 8r 
3
DS1 CONV-Remoted Port Networks
For a c ritic al reliab ility system with 1 DS1 CONV-remoted  EPN, this arrang ement 
req uires:
nFour DS1 CONV c irc uit p ac ks (TN1654)
nFour DS1 CONV-to-EI c ab les (847245750 and/or 847245768)
nFour H-600-348 c ab les
nTwo, 4, 6, or 8 p airs of c hannel servic e units...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-35 Release 5/6si to Release 8r 
3
For 1 or 2 Collocated Expansion Port Networks
1. Behind  p ort c arrier C of the multic arrier PPN. See Figure 3-12 and  Figure 
3-13:
a. Install a lig htwave transc eiver on the c onnec tor at slot 1C02.
NOTE:
Attenuators may be required for single mode fiber using a 
300A Lightwave Transc eiver
b ....

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-36 Release 5/6si to Release 8r 
3
4. Behind control cabinet A of EPN stack 2:
a. Install a lig htwave transc eiver on the c onnec tor at slot 2A01.
NOTE:
Attenuators may be required for single mode fiber using a 
300A Lightwave Transc eiver
b . Connec t the other end  of the fib er op tic  c ab le c oming  from the PPN 
to the lig htwave...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-37 Release 5/6si to Release 8r 
3
Figure 3-13. Fiber Optic Connections PPN to EPN1 Figure Notes
1. Lightwave Transc eiver
2. To PPN Carrier D Slot 1D02
3. To EPN 1 Carrier A Slot 2A01 
(Cab inet Stac k 2)
4. PPN Carrier C Slot 1C025. EPN1 Cab inet B Slot 2B02
6. Fiber Optic Cable
7. TX Connec tor
8. RX Connec tor
cydff06 CJL 103196
RX...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory 
3-38 Release 5/6si to Release 8r 
3
Switch-Connected Port Networks
For 1 to 15 Standard Reliability EPNs. 
1. Behind  the PPN c ab inet. See Figure 3-14
:
a. Install a lig htwave transc eiver on c ab le c onnec tor at slot 1E02.
b . Install a lig htwave transc eiver on c ab le c onnec tor at slot 1B02.
c . Connec t 1 end  of the metallic...