Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual
Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual
Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 131
DEFINITY Enterprise Communications Server Release 8.2 Upgrades and Additions for R8r 555-233-115 Issue 1 April 2000 G3vs with Intel 386 or Risc Processor to R8r 4-3 Read This First 4 Usable Circuit Packs Every circuit pac k used in the Release 8 system must conform to the minimum usab le vintag e req uirements for that system. At a p resale site insp ec tion, the remed iation p roc ess c hec ks the vintag es of existing c irc uit p ac ks to b e reused in the Release 8 system. Circ uit p ac ks...
Page 132
DEFINITY Enterprise Communications Server Release 8.2 Upgrades and Additions for R8r 555-233-115 Issue 1 April 2000 G3vs with Intel 386 or Risc Processor to R8r 4-4 Task Tables 4 Ta s k Ta b l e s Table 4-1 p rovid es the hig h-level tasks to perform the up g rad e in this c hap ter. Table 4-1. Tasks to Upgrade to Release 8r ÖTask Description Page Software Upgrade 4-6 Save Translations and Announcements4-7 Check Link Status4-7 Disable TTI4-8 Disable Alarm Origination to INADS4-8 Shut Down DEFINITY...
Page 133
DEFINITY Enterprise Communications Server Release 8.2 Upgrades and Additions for R8r 555-233-115 Issue 1 April 2000 G3vs with Intel 386 or Risc Processor to R8r 4-5 Task Tables 4 Resolve Alarms4-16 Enable Customer Options and Alarm Origination to INADS4-17 Save Translations4-18 Back Up Disk4-18 Return Replaced Equipment 4-18 Table 4-1. Tasks to Upgrade to Release 8r — Continued ÖTask Description Page
Page 134
DEFINITY Enterprise Communications Server Release 8.2 Upgrades and Additions for R8r 555-233-115 Issue 1 April 2000 G3vs with Intel 386 or Risc Processor to R8r 4-6 Preliminary Procedures 4 Preliminary Procedures Software Upgrade For this up g rad e, a Translation Up g rad e Tool (TUT) is req uired . The translations on the translation c ard must b e c op ied to tap e. This p roc ed ure must b e performed before the upgrade begins. 1. Cop y the translations in the p resent system to a sp are...
Page 135
DEFINITY Enterprise Communications Server Release 8.2 Upgrades and Additions for R8r 555-233-115 Issue 1 April 2000 G3vs with Intel 386 or Risc Processor to R8r 4-7 Remove the Present System 4 Remove the Present System nIf the eq uip ment room is large enoug h to allow the Release 8r c ab inet to b e installed while the p resent system is in servic e, skip to ‘‘Install the Release 8r Cabinets’’ on page 4-11. Return to this sec tion when finished . nIf the p resent system must b e removed to make...
Page 136
DEFINITY Enterprise Communications Server Release 8.2 Upgrades and Additions for R8r 555-233-115 Issue 1 April 2000 G3vs with Intel 386 or Risc Processor to R8r 4-8 Remove the Present System 4 Disable TTI !CAUTION: If you d o not d isab le the TTI, the translations c an b e c orrup ted . 1. Make sure the ISDN is in servic e. If not, attempt to b usy out and release the ISDN D-c hannel/link. This will b ring the ISDN trunks b ac k into servic e. 2. Type change system-parameters features and press...
Page 137
DEFINITY Enterprise Communications Server Release 8.2 Upgrades and Additions for R8r 555-233-115 Issue 1 April 2000 G3vs with Intel 386 or Risc Processor to R8r 4-9 Remove the Present System 4 Shut Down DEFINITY AUDIX System !WARNING: Neg lec ting to shut d own an AUDIX assemb ly b efore p owering d own the system c ab inet where it resides c an d amage the AUDIX d isk. 1. If a DEFINITY AUDIX System resid es in the system to b e up g rad ed , shut d own the AUDIX assemb ly and allow the d isk to...
Page 138
DEFINITY Enterprise Communications Server Release 8.2 Upgrades and Additions for R8r 555-233-115 Issue 1 April 2000 G3vs with Intel 386 or Risc Processor to R8r 4-10 Remove the Present System 4 Disconnect Power and Ground 1. Disc onnec t the c ab inet p ower c ord s from the rear of the c ab inet. 2. Disconnect the 10 AWG (#25) (2.6 mm 2) c oup led b ond ing c ond uc tor wire. 3. Disc onnec t the 6 AWG (#40) (4.1 mm 2) CABINET GROUND wire from the g round b ar in the c ab inet. Remove the Present...
Page 139
DEFINITY Enterprise Communications Server Release 8.2 Upgrades and Additions for R8r 555-233-115 Issue 1 April 2000 G3vs with Intel 386 or Risc Processor to R8r 4-11 Install the Release 8r Cabinets 4 Install the Release 8r Cabinets Unpack and Install the Release 8r Cabinet 1. Refer to the installation instruc tions in DEFINITY Enterp rise Communic ations Server Release 8 Installation and Test for Multic arrier Cab inets . !CAUTION: Do not p ower up the Release 8r system. 2. Return to this sec...
Page 140
DEFINITY Enterprise Communications Server Release 8.2 Upgrades and Additions for R8r 555-233-115 Issue 1 April 2000 G3vs with Intel 386 or Risc Processor to R8r 4-12 Install the Release 8r Cabinets 4 Restore Disk Full 1. Type restore disk full and p ress En te r. This instruc ts the system to c op y the entire removab le med ia to d isk and takes ab out 30 minutes to c omp lete. Release 8 system software with translations are now resid ent on the d isk. NOTE: Until this c ommand finishes, the...