Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 System Description Manual

							DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Technical Specifications 
211 Additional Hardware to Use Features 
Extended user 
administration of 
redirected calls
(Category A only)No additional hardware required.
External device 
alarmingNo additional hardware required.
Facility busy indi-
cationNo additional hardware required other than a feature button with a 
light.
Facility test calls No additional hardware required.
Fiber link admin-
istrationFor a public network, a CSU. For a campus network, a digital data 
module or similar device.
Go to cover No additional hardware required.
Hold No additional hardware required.
Hold - automatic No additional hardware required.
Hot line service No additional hardware required.
Hunt group No additional hardware required.
Facility and 
non-facility asso-
ciated signalingSee ISDN-BRI.
Flexible billing An ASAI adjunct processor is required.
Generalized 
MFCDS1 interface 24/32 and call classifier circuit packs.  DEFINITY sup-
ports MFC in roughly 40 countries.  In all of those countries, you 
need some type of trunk interface circuit pack and a call classifier 
circuit pack.  some countries require a digital interface and some 
require an analog interface and some can use either one.
German — digital DS1 interface 24/32 for German digital trunks (such as PRI).
Greece MFC DS1 interface 24/32 and call classifier circuit packs.
Table 49.Additional Hardware to Use Features  — Continued  
Feature Hardware
Continued on next page 
						

							Technical Specifications 
212 Additional Hardware to Use Features 
DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Inbound call 
management 
(ICM) (Category 
A only)ASAI hardware (See ASAI feature). Use of ACD feature required 
(see ACD feature).
Individual atten-
dant accessNo additional hardware required.
Integrated 
announcementSee Recorded Announcement.
Integrated direc-
toryIf the terminal is connected to an associated data terminal, the 
7404D voice terminal requires an optional Messaging Cartridge.
Intercept treat-
mentRequires announcement equipment and 1 port on an analog line cir-
cuit pack for each announcement and for each external analog 
announcement device, or an AUX trunk port for each external AUX 
trunk device. See Recorded Announcements. A TN750C Announce-
ment circuit pack can provide up to 256 announcements. Intercept 
treatment can be administered to the attendant console.
Intercom - auto-
maticNo additional hardware required.
Intercom — dial No additional hardware is required.
Internal auto-
matic answer 
(IAA)All multi-function voice terminals with speakerphone or headset may 
be used (except ISDN-BRI voice terminals) plus a port interface on a 
circuit pack.
Inter-PBX atten-
dant callsTie trunk group between the branch and main locations.
IP trunk All: TN802 MAPD IP Trunk circuit pack, TN802 External Cable 
Assembly, three adjacent, vacant slots in the carrier. 
Ta b l e  4 9 .Additional Hardware to Use Features  — Continued  
Feature Hardware
Continued on next page 
						

							DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Technical Specifications 
213 Additional Hardware to Use Features 
ISDN-BRI line All: BRI line circuit pack
R8si: a packet interface circuit pack for PRI over the packet inter-
face, TN794 Netpacket circuit pack.
R8si: TN570 expansion interface circuit pack (for system connectiv-
ity in multiple port network systems), maintenance/test circuit pack in 
the PPN (for packet applications), maintenance/test circuit pack in 
each additional EPN (for critical reliability systems).
R8r: Maintenance/test circuit pack in the PPN (for packet applica-
tions), maintenance/test circuit pack in each additional EPN (for criti-
cal reliability systems).
ISDN-BRI trunk One BRI trunk circuit pack for up to eight 2B+D interfaces. 
ISDN-PRI One PRI DS1 (T1/E1) interface circuit pack provides a signaling link 
and up to 23 ISDN-PRI trunk group members and up to 30 for E1 
channels. R8si: a processor interface circuit pack for PRI over PI, a 
packet control circuit pack for PRI via the LAN bus and NetPacket. 
R8csi/r: no additional hardware beyond DS1 interface. 
Last number 
dialedNo additional hardware required.
Leave word call-
ingDisplay terminal to store and retrieve the LWC message.
Line lockout No additional hardware required.
Listed directory 
numbersNo additional hardware required.
Look ahead inter-
flow (Category A 
only)No additional hardware is required. Interconnecting facilities must be 
ISDN-PRI with no interworking. Calls that interwork may interflow 
successfully but the ability to do so on an intelligent basis is lost, as 
is the look ahead interflow DNIS information.
Table 49.Additional Hardware to Use Features  — Continued  
Feature Hardware
Continued on next page 
						

							Technical Specifications 
214 Additional Hardware to Use Features 
DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Loudspeaker 
paging accessRequires loudspeaker paging equipment and 1 port on an auxiliary 
trunk circuit pack for each individual paging zone port (9 maximum). 
Paging interface equipment consisting of a 909-type voice coupler 
adapter (only if equipment is not FCC-registered) and a 24-volt 
power supply, per zone. This hardware can be shared with the code 
calling access feature. If PagePac paging system equipment is 
used, 1 port on a CO trunk, analog line, or auxiliary trunk circuit pack 
is used, depending on the PagePac arrangement.
Loudspeaker 
paging access - 
deluxeLoudspeaker paging equipment and 1 port on an auxiliary trunk cir-
cuit pack per zone. Paging interface equipment consisting of a 
909-type voice coupler adapter (only if equipment is not FCC- regis-
tered) and a 24-volt power supply, per zone. This hardware can be 
shared with the code calling access feature. 
Malicious call 
traceA display set and optional CPE recording device.
Manual mes-
sage waitingNo additional hardware required.
Manual originat-
ing line serviceNo additional hardware required.
Manual signaling No additional hardware required.
MERLIN/system 
25 - voice termi-
nal support 
(731xH Series)No additional hardware required.
Messaging 
server interfaceR8si requires a processor interface circuit pack. A port on a digital 
line circuit pack is required to provide the MS interface This applica-
tion also requires an ADU and a port on a data line circuit pack or a 
modem and an analog line circuit pack. R8r: The BX.25 connection 
requires a PGATE circuit pack.
MFC enhance-
mentsDS1 interface 24/32 and call classifier circuit packs.
Ta b l e  4 9 .Additional Hardware to Use Features  — Continued  
Feature Hardware
Continued on next page 
						

							DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Technical Specifications 
215 Additional Hardware to Use Features 
MF shuttle  DS1 interface 24/32 and call classifier circuit packs.
MF signaling No additional hardware required.
Misoperations 
handlingNo additional hardware required.
Modem pooling 
(Category A only)One pooled modem circuit pack per 2 integrated conversion 
resources provided. Each combined conversion resource requires 1 
port on the digital line circuit pack, 1 port on an analog line circuit 
pack, and an analog modem and data module or 7400 terminal.
Multi-appear-
ance preselec-
tion and 
preferenceMultiappearance telephone.
Multimedia appli-
cations server 
interface (MASI)
(Category A only)DS1 interface 24/32 and call classifier circuit packs.
Multimedia call 
appearances
(Category A only)Requires no additional hardware.
Multimedia call 
early answer on 
vectors and sta-
tions (Category A 
only)Requires no additional hardware.
Multimedia call 
handling 
(MMCH) (Cate-
gory A only)Multimedia interface circuit pack and multimedia voice conditioner 
circuit pack to provide multimedia call processing. A digital line port 
and BRI data port per multimedia complex.
Table 49.Additional Hardware to Use Features  — Continued  
Feature Hardware
Continued on next page 
						

							Technical Specifications 
216 Additional Hardware to Use Features 
DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Multiple call han-
dling on request 
or forced (forced 
is Category A 
only)A multi-appearance set is required.
Multimedia call 
redirection to MM 
endpoint (Cate-
gory A only)Requires no additional hardware.
Multimedia data 
conferencing via 
expansion ser-
vices module 
(ESM) (Category 
A only)ESM adjunct device (terminates T.120 protocol and provides data 
conference control and data distribution), TN2207 modified PRI cir-
cuit pack, TN787 multimedia interface circuit pack, a cable to con-
nect the TN2207 to the TN787
Multimedia hold, 
conference, 
transfer, and 
drop (Category A 
only)Requires no additional hardware.
Multimedia 
multiple-port net-
work (Category A 
only)Requires no additional hardware.
Multimedia queu-
ing with voice 
announcement 
(Category A only)Requires no additional hardware.
Ta b l e  4 9 .Additional Hardware to Use Features  — Continued  
Feature Hardware
Continued on next page 
						

							DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Technical Specifications 
217 Additional Hardware to Use Features 
Multimedia ser-
vice-link architec-
ture support of 
voice/data mode 
(Category A only)Requires no additional hardware.
Music-on-hold 
accessMusic source and 1 port on an auxiliary trunk or analog line circuit 
pack are required. A 909-type voice coupler is required if the system 
is not FCC-registered (United States only). A music source and 1 
port on a TN746B or TN468B or later Analog Line circuit pack. A 
KS23395, L4 Music-on-Hold interface to convert a loop start port into 
a Music-on-Hold port. The port must be administered for this pur-
pose. Also, a 909-type voice coupler is required if the music source 
is not FCC-registered (United States only). France: a port on the 
TN2183 Analog Line circuit pack and the 122A Music-on-Hold inter-
face unit (wall-mounted).
Names registra-
tion A PMS can connect through a data module and a port on a digital 
line circuit pack, or through an ADU and a port on a data line circuit 
pack. A journal printer requires a data module and a port on a digital 
line circuit pack, or an ADU and a port on a data line circuit pack.
National ISDN-1 DS1 Interface circuit pack.
Native support of 
6402D display 
terminalRequires no additional hardware.
Network access 
— publicOne port on a CO or DIOD trunk circuit pack or 1 port on a DS1/E1 
interface circuit pack or tie trunk circuit pack.
Night Service - 
hunt group, night 
console service 
and night station 
serviceNo additional hardware required other than a button to activate and 
deactivate the feature.
Table 49.Additional Hardware to Use Features  — Continued  
Feature Hardware
Continued on next page 
						

							Technical Specifications 
218 Additional Hardware to Use Features 
DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Night service — 
trunk answer 
from any stationRinging device and 1 port on an analog line circuit pack.
Night service - 
trunk groupNo additional hardware required other than a button to activate and 
deactivate the feature.
NT interface on 
TN556B/CRequires no additional hardware.
NT QSIG peer 
protocolRequires no additional hardware.
Off-premises 
data extensionsTrunk data module or DCP extender and 1 port on a digital line cir-
cuit pack or DS1 circuit pack.
Off-premises sta-
tionCross-connecting capabilities and 1 port on an analog line circuit 
pack or DS1 circuit pack.
Outbound call 
management 
(OCM) (Cate-
gory A only)Requires a TN2182B tone-clock circuit pack. Can also use an older 
tone-clock as long as a TN744C or newer tone detector circuit pack 
is in the system.
PC application 
software transla-
tion exchange 
(PASTE) (Cate-
gory A only)A port on a digital line or BRI line circuit pack connected through a 
Personal Computer configured with the PC/PBX, PC/ISDN, or Pas-
sageWay circuit pack and application software to an appropriate 
voice terminal.
PC interface 
(hardware varies 
depending on the 
configuration 
group used)Group 2: 7400-series DCP terminals, PC/PBX interface card, an 
IBM-compatible PC (6300 or 6300 Plus with DOS 3.1 or later, or 
PC/XT with PC-DOS 3.1 or later. 448K or more of RAM is recom-
mended on PCs running integrated software applications.
Group 3: 7500-series ISDN-BRI Voice Terminal, up to 4 PC/ISDN 
expansion cards, an IBM-compatible PC (6300, 6300 Plus, PC/XT, 
PC/AT, PS/2, or Compaq), and DOS 3.1 or later.
Ta b l e  4 9 .Additional Hardware to Use Features  — Continued  
Feature Hardware
Continued on next page 
						

							DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Technical Specifications 
219 Additional Hardware to Use Features 
PC/PBX connec-
tion A port on a digital line circuit pack for each PC/PBX connected. 
Personal central 
office line 
(PCOL)A port on a central office trunk circuit pack for each trunk assigned 
as a PCOL.
Personal station 
accessDigital line ports and a digital voice terminal.
Personalized 
ringingNo additional hardware required.
Power Failure 
TransferOne emergency transfer panel per 5 or 6 trunks assigned to Power 
Failure Transfer, depending on panel used. The following panels are 
available:
n808A Panel — Serves up to 5 failure transfer terminals. The unit 
provides automatic ground start or loop start
nZ1A Panel — Serves up to 6 power failure transfer terminals. A 
ground-start key is required at each preselected voice terminal 
when ground-start trunks are used
PRI Converter DASS - 1 TN464F DS1/E1 circuit pack and 1 TNCCSC-1 circuit 
pack.
DPNSS - 1 TN464F DS1/E1 circuit pack and 1 TNCCSC-2 circuit 
pack.
BRI - 1 TN464F DS1/E1 circuit pack and 1 TNPRI/BRI circuit pack.
Priority Calling No additional hardware required.
Privacy - Atten-
dant LockoutNo additional hardware required.
Privacy - Manual 
ExclusionNo additional hardware required.
Table 49.Additional Hardware to Use Features  — Continued  
Feature Hardware
Continued on next page 
						

							Technical Specifications 
220 Additional Hardware to Use Features 
DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Property Man-
agement System 
(PMS)For all except R8r, either:
1. Using a digital line port and a data module, or
2. Using a digital line port and an ADU
For R8r, either:
1. A packet data circuit pack cross-connected to a port on a data 
line circuit pack, connected to a second data line circuit pack 
port and then to an ADU, or 
2. A packet data circuit pack cross-connected to a port on a data 
line circuit pack connected to either a BRI line circuit pack 
connected to a 7500 Data Module or to a digital line connected 
to a data module. Data line circuit pack with an ADU or a data 
module and port on a digital line circuit pack.
Public Network 
Call PriorityNo additional hardware required.
Pull Transfer No additional hardware is required in a stand-alone configuration. In 
a network environment, the TGU/TGE tie trunks (TN497) are the 
only trunks that support the flash signaling necessary to complete 
the pull transfer operation between systems.
QSIG Global 
NetworkingSame as ISDN-PRI. See ISDN-PRI.
QSIG call offer 
(Category A only)
QSIG call com-
pletion (Cate-
gory A only)No additional hardware is required.
Ta b l e  4 9 .Additional Hardware to Use Features  — Continued  
Feature Hardware
Continued on next page