Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing trunks 
357 Adding a DIOD trunk group 
12
7. In the Incoming Dial Type field, type tone.
This field tells the switch how digits are transmitted for incoming calls. 
Entering tone actually allows the trunk group to support both DTMF and 
rotary signals, so Lucent recommends that you always put tone in this field.
8. In the Trunk Termination field, type 
rc.
Use rc in this field when the distance to the central office...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing trunks 
358 Adding a PCOL trunk group 
12
Adding a PCOL trunk group
In most cases, when administering Personal Central Office Line (PCOL) trunk 
groups, Lucent recommends leaving the default settings in fields that aren’t 
specifically mentioned in the following instructions. Your Lucent representative 
or network service provider can give you more information. Your settings in the 
following fields must match your...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing trunks 
359 Adding a PCOL trunk group 
12
2. In the Group Type field, type co.
This field specifies the kind of trunk group you’re creating. PCOL groups 
can be administered as CO, FX, or WATS trunks.
3. In the Group Name field, type 
Outside calls.
This name will be displayed, along with the group number, for outgoing 
calls if you set the Outgoing Display? field to 
y. You can type any name up 
to 27 characters...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing trunks 
360 Adding a PCOL trunk group 
12
You assign phones to a PCOL group by administering a CO Line button on each 
phone. Once assigned, the Assigned Members page of the Personal CO Line 
Group screen displays member phones:
More information
Call Detail Recording
Call Detail Recording can be activated for calls on a personal CO line, but the 
CDR record does not specifically identify the call as PCOL. Calls over...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing trunks 
361 Adding a Tie or Access trunk group 
12
Adding a Tie or Access trunk group
In most cases, Lucent recommends leaving the default settings in fields that aren’t 
specifically mentioned in the following instructions. Your Lucent representative 
or network service provider can give you more information. Your settings in the 
following fields must match your provider’s settings (or the setting on the far-end...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing trunks 
362 Adding a Tie or Access trunk group 
12
Instructions
As an example, let’s add a two-way tie trunk group that supports voice and 
voice-grade data.
To add the new tie trunk-group:
1. Type 
add trunk-group next and press RETURN.
The Trunk Group
 screen appears. The system assigns the next available 
trunk group number to this group. In our example, we’re adding trunk 
group 5.
2. In the Group Type field,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing trunks 
363 Adding a Tie or Access trunk group 
12
5. In the TAC field, type 105.
This field defines a unique code users can dial to access this trunk group. 
6. In the Direction field, type 
two-way.
This field defines the direction of traffic flow on this trunk group.
7. Type 
1234 in the Night Service field.
This field assigns an extension to which calls are routed outside of business 
hours.
8. In the Comm Type...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing trunks 
364 Setting up digital trunks 
12
Setting up digital trunks
Any of the common trunks, except for PCOL trunks, can be analog or digital. 
(PCOL trunks can only be analog.) Administering a digital trunk group is very 
similar to administering its analog counterpart, but digital trunks must connect to 
a DS1 circuit pack and this circuit pack must be administered separately. The 
example in this section shows...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing trunks 
365 Setting up digital trunks 
12
Instructions
The following example shows a DS1 circuit pack configured for T1 service. The 
circuit pack is supporting a two-way CO trunk group that carries only voice and 
voice-grade data.
To configure a new DS1 circuit pack:
1. Type 
add ds1 07A19 and press ENTER.
The DS1 Circuit Pack
 screen appears. You must enter a specific port 
address for the circuit pack.
2. Type...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing trunks 
366 Setting up digital trunks 
12
More information
T1 recommended settings
The table below shows recommended settings for standard T1 connections to your 
local exchange carrier.
If you use b8zs line coding and esf framing, it will be easier to upgrade your T1 
facility to ISDN should you want to. You can upgrade without reconfiguring 
external channel service units, and your service provider won’t have to...