Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY® Enterprise Communication Server Release 8.2 Reports Guide

Lucent Technologies DEFINITY® Enterprise Communication Server Release 8.2 Reports Guide

Here you can view all the pages of manual Lucent Technologies DEFINITY® Enterprise Communication Server Release 8.2 Reports Guide. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 161

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-119 Port Network Reports 
3
Port Network Reports
This sec tion d isc usses the p ort network rep orts.
Blockage Study Report
The Bloc kag e Stud y Rep orts p rovid e information on usag e and  b loc kag e for 
eac h p ort network as well as b etween switc h nod e p airs.
There are two rep orts: One p rovid es p ort network (PN) and  p ort network link 
(PNL) d ata and  the other p...

Page 162

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-120 Blockage Study Report 
3
The TDM time slots are samp led  every one hund red sec ond s. Usag e 
measurements for these samp led  intervals are exp ressed  in hund red  c all 
sec ond s or CCS. For examp le, any time slot in use when the samp le is taken is 
assumed  b usy for the entire samp ling  interval and  is c ounted  as one CCS for the 
interval. Bec ause there are 36...

Page 163

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-121 Blockage Study Report 
3
Command
To d isp lay the Blockag e Stud y Rep ort:
1. Type list measurements blockage pn/sn  [print/schedule] 
and  p ress 
RETURN.
Required Fields: There is one req uired  field  for this c ommand  —
yesterday-peak/today-peak/last-hour
. 
nEn t e r  yesterday-peak
 to list the b lockag e activity for yesterd ay’s 
p eak hour. 
nEn t e r  today-peak
 to...

Page 164

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-122 Blockage Study Report 
3
Table 3-33. Blockage Study Port Network Report 
Field Description
PN
Port Network. The port network being measured.
Meas Hour
Measurement Hour. The starting  time (using  the 24-hour c loc k) 
of the hour d uring whic h the d ata was rec ord ed .
TDM Usage
Time Division Mulip lexed  Usag e. The total TDM time-slot 
usag e, in CCS, for the PN b eing...

Page 165

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-123 Blockage Study Report 
3
Port 
Network 
Link UsageThe total c irc uit switc h usage of the availab le PN Link(s) 
c onnec ting  the PN to the SN or to other PNs. For d irec tly 
c onnec ted  PNs in three PN systems, this is the sum of the 
usage
 for b oth links. 
PN LINK USAGE =  Sum of the alloc ated  PN Link time-slots at 
the end  of eac h 100 sec ond  interval in a...

Page 166

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-124 Blockage Study Report 
3
Switch Node Screen
Screen 3-42 shows a typ ic al Bloc kag e Stud y Switc h Nod e Rep ort. Table 3-34 
describes those data fields presented in the Blockage Study Switch Node Report 
d ifferent from those in the Port Network Rep ort. Refer to Table 3-33
 for d ata fields 
that are the same. This rep ort is only ac c essib le from the G3r server.
Screen...

Page 167

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-125 Port Network Load Balance Report 
3
Port Network Load Balance Report
The PNL Load  Balanc e Rep orts are d esig ned  to show the load ing  on eac h PN 
and  g ive an ind ic ation of the load sourc e b y c all typ e. Knowing  the load  sourc e 
means informed  d ec isions c an b e mad e on how b est to d ec rease the load  or the 
effec t of ad d ing  various kind s of ports to...

Page 168

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-126 Port Network Load Balance Report 
3
Command
To d isp lay the Port Network Load  Balanc e Rep ort:
1. Type list measurements load-balance   
[print/schedule] 
and  p ress 
RETU RN.
Required Fields: There are two req uired  field s for this c ommand . 
1. total/intercom/incoming/outgoing/tandem
nEn t e r  total
 for an overview of time slot usage, blockage, 
p eg s, and  oc c up...

Page 169

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-127 Port Network Load Balance Total Calls Report 
3
Port Network Load Balance 
Total Calls Report
Screen
Screen 3-43 depic ts an example of a typical screen for the Port Network Load 
Balanc e Total Calls Rep ort. Table 3-35
 describes the data fields presented in the 
Port Network Load  Balanc e Total Peak Rep ort.
Screen 3-43. Port Network Load Balance Total Calls Report
Table...

Page 170

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-128 Port Network Load Balance Total Calls Report 
3
TDM 
BlockageTime Division Multiplexed  Blockag e. The total c ount of TDM 
b loc kag es, that is, the total number of times a TDM time-slot 
request is d enied for the PN b eing  measured , d uring  the 
measurement hour.
TDM Occ
Time Division Multiplexed  Occ up anc y.  Th e  p e r c e n t  TD M  
Oc cupancy is computed as...
Start reading Lucent Technologies DEFINITY® Enterprise Communication Server Release 8.2 Reports Guide

Related Manuals for Lucent Technologies DEFINITY® Enterprise Communication Server Release 8.2 Reports Guide

All Lucent Technologies manuals