Lucent Technologies DEFINITY® Enterprise Communication Server Release 8.2 Reports Guide

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-49 Call Coverage Measurements Reports 
3
Trunks
CO trunks and  other trunks that have ring -b ac k p rovid ed  by the CO rep eated ly 
attemp ts to c omplete the c all to the p rinc ip al. Eac h attempt is c onsid ered  a new 
offered  c all and  is c ounted  for princ ip al or c overage as ap p ropriate.
Data Analysis Guidelines
There is no c olumn for answered  c alls for p rinc...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-50 Coverage Path Measurements Selection 
3
Coverage Path Measurements 
Selection 
You can select up to 100 c overage paths for measurement.
Command
To d isp lay the list of c overag e p aths  to be measured : 
1. Type display meas-selection coverage [print/schedule]
 and press 
RETU RN.
To d isp lay the list of all the c overag e p aths on your system: 
1. Type list coverage path...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-51 Coverage Path Measurements Selection 
3
Screen
Screen 3-13 shows a typ ic al sc reen for the Coverag e Path Measurements 
Selec tion rep ort c ontaining  entries for the 100 c overag e p aths to b e measured . 
Table 3-10
 describes the data fields presented in the Coverage Path 
Measurements Selec tion report.
Screen 3-13. Coverage Path Measurements Selection
Table 3-10....

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-52 Coverage Path Measurements Report 
3
Coverage Path Measurements Report
The Coverag e Path Measurements rep ort c ontains measurements for eac h of the 
100 selec ted  c overag e p aths from the Coverag e Path Measurement Selec tion 
sc reen.
Command
To d isp lay the Coverag e Path Measurements Rep ort: 
1. Type list measurements coverage-path [starting path] [count (1-100)]...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-53 Coverage Path Measurements Report 
3
Screen
Screen 3-14 shows a typ ic al sc reen for the Coverag e Path Measurements rep ort. 
The time and  d ate the rep ort is req uested displays at the top  rig ht. Table 3-11
 
describes the data presented in the Coverage Path Measurements report.
Screen 3-14. Coverage Path Measurements report
Table 3-11. Coverage Path Measurements Report...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-54 Coverage Path Measurements Report 
3
Act 
CriteriaAc tive Criteria. The numb er of c alls offered  to this p ath d ue to the 
principal being active.
Suggested Action:
 If this numb er is larg e c omp ared to the Calls Offrd  
field , you should investig ate. A p ossib le reason is the p ath is 
ad ministered  for “ ac tive”  only.
Bsy 
Criteria
Busy Criteria. The number of c...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-55 Principal Coverage Measurements Selection 
3
Principal Coverage Measurements 
Selection 
You c an selec t up to 100 p rinc ipal extensions or PCOL TACs for measurement.
For d efinitions of p rinc ip al extensions and TACs, refer to “ Terms”  earlier in the 
‘‘Call Coverage Measurements Reports’’
 sec tion.
Command
To d isp lay the list of p rinc ipal extensions  to b e measured...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-56 Principal Coverage Measurements Selection 
3
Screen
Screen 3-15 shows a typ ic al Princ ip al Coverag e Measurements Selec tion sc reen 
c ontaining  entries for the 100 p rinc ipal extensions or TACs to be measured . 
Table 3-12
 describes the data fields presented in the Principal Coverage 
Measurements Selec tion screen.
Screen 3-15. Principal Coverage Measurements Selection...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-57 Principal Coverage Measurements Report 
3
Principal Coverage Measurements 
Report
The Princ ip al Coverag e Measurements rep ort c ontains measurements for eac h 
of the 100 selec ted  p rinc ip al extensions or TACs from the Princ ip al Coverag e 
Measurements Selec tion screen.
Command
To display the Principal Coverage Measurements report: 
1. Type list measurements principal...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Traffic Data Analysis 
3-58 Principal Coverage Measurements Report 
3
Screen
Screen 3-16 shows a typ ic al sc reen for the Princ ipal Coverag e Measurements 
rep ort. The time and  d ate the rep ort is req uested  d isp lays at the top  rig ht. Table 
3-13 describes the data fields presented in the Principal Coverage 
Measurements rep ort.
Screen 3-16. Principal Coverage Measurements Report 
Table 3-13....