Home > Lucent Technologies > Communications System > Lucent Technologies Definity Audix System Digital Networking Guide

Lucent Technologies Definity Audix System Digital Networking Guide

Here you can view all the pages of manual Lucent Technologies Definity Audix System Digital Networking Guide. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 151

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-23 DEFINITY AUDIX Administration 
9
The Test Machine Results screen d isp lays similar to the sc reen shown b elow. 
Figure 9-12. Local Test Machine Results Screen
The Test Pass c olumn should  c ontain a 1. If Test Pass is 0, refer to 
DEFINITY 
AUDIX System Maintenanc e
, 585-300-110, to d etermine a solution. Resolve the 
p rob lem and  run the test ag ain.
NOTE:
From a...

Page 152

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-24 DEFINITY AUDIX Administration 
9
Task 9: Administer Remote System(s) on the
Local DEFINITY AUDIX System 
Ad minister eac h remote DEFINITY AUDIX system, Intuity AUDIX system, or 
AUDIX R1 system on the loc al DEFINITY AUDIX system. Refer to the information 
rec eived  from the desig n c enter when c omp leting  this sc reen.
With the c ursor at enter command:
, enter add...

Page 153

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-25 DEFINITY AUDIX Administration 
9
Ta b l e  9 - 3 .Remote Machine Profile Screen — Page 1 Entries 
Field Description
Mac hine Typ e Enter audix
 for the DEFINITY AUDIX system and  the Intuity AUDIX 
system. Enter r1aud
 for the AUDIX R1 system.
Loc ation Enter remote
Voic ed  Name? The system sets this field  to y when a user with announc ement 
p ermission rec ords a name for...

Page 154

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-26 DEFINITY AUDIX Administration 
9
Start Ext. Enter the starting  extensions for the rang es of telep hone numb ers 
used  on the remote system. For examp le, if your system uses 
extensions b etween 2000 and  3000, enter 2000 in the Start Ext. 
field .
End  Ext. Enter the end ing extensions for the ranges of telep hone numb ers 
used  on the remote system. For examp le, if your...

Page 155

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-27 DEFINITY AUDIX Administration 
9
Enter the c hang es and  p ress  
(F7) 
to display Pag e 2 of the Mac hine 
Profile sc reen similar to the sc reens shown b elow. Refer to the following  tab le to 
c omp lete this sc reen. Press  
(F3) to ad d  the mac hine p rofile for the remote 
system.
Figure 9-14.Remote Machine Profile Screen (DCP Mode 3) — Page 2
The ab ove examp le in a...

Page 156

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-28 DEFINITY AUDIX Administration 
9
Figure 9-15.Remote Machine Profile Screen (DCP Mode 2) — Page 2
The ab ove examp le shows a DCP Mod e 2 Dial String . Refer to Chap ter 4, ‘‘DCP 
Mod e 2 — 9600 or 19,200 b p s’’. Multistag e Dialing p rovides a d esc rip tion of the 
d ialing  stag es need ed  for DCP Mod e 2. 
Hunt Group s in Switc h Ad ministration 
Req uirements for DCP Mod...

Page 157

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-29 DEFINITY AUDIX Administration 
9
Ta b l e  9 - 4 .Remote Machine Profile Screen — Page 2 Entries 
Field Description
Dial String Enter the string  of d ig its used  when the DEFINITY AUDIX system 
d ials the remote system to estab lish a networking  c all. Valid  
entries are 0 to 65 alp hanumeric  c harac ters inc lud ing  the 
following : 
ndigits 
nup p er and  lower c ase...

Page 158

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-30 DEFINITY AUDIX Administration 
9
Data Rate Enter the d ata rate to b e used  for an outg oing  network c all to this 
DEFINITY AUDIX system.
DCP Mod e 1 =  56000 
Kbps
DCP Mod e 2 =  9600
 or 19200 
bps
DCP Mod e 3 =  64000 
Kbps
This d ata rate is used  to selec t a network g roup  for outg oing  c alls, 
so this should  matc h a d ata rate ad ministered  for a network g roup...

Page 159

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-31 DEFINITY AUDIX Administration 
9
Rep eat this task for eac h remote system. Network 
TurnaroundEn t e r  n
 in this field for the p urp ose of ac c ep tanc e tests. After the 
ac c ep tanc e tests, enter y
 if a network c onnec tion that orig inated 
from this remote system is allowed  to turn around  after the remote 
system has sent all of its network d ata to the loc al...

Page 160

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-32 DEFINITY AUDIX Administration 
9
Examples of DEFINITY AUDIX Digital
Networking Dial Strings
DCP Mode 1 or DCP Mode 3 Dial String Using Automatic Alternate 
Routing (AAR)
8,5551234
n8 – AAR feature ac c ess c od e
n555 – Route Numb er Ind ex (RNX)
n1234 – Last four d igits of the remote AUDIX networking  p ort or hunt g roup
DCP Mode 1 or DCP Mode 3 Dial String Using Automatic...
Start reading Lucent Technologies Definity Audix System Digital Networking Guide

Related Manuals for Lucent Technologies Definity Audix System Digital Networking Guide

All Lucent Technologies manuals