Home > Lucent Technologies > Communications System > Lucent Technologies Definity Audix System Digital Networking Guide

Lucent Technologies Definity Audix System Digital Networking Guide

Here you can view all the pages of manual Lucent Technologies Definity Audix System Digital Networking Guide. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 141

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-13 DEFINITY AUDIX Administration 
9
Task 4: Administer Digital Networking Port(s)
and Extensions
Ad minister the d ig ital networking  p orts and  extensions on the Network Group  
sc reen. The networking  p orts ad ministered  in this task must matc h the 
networking  p orts ad ministered  on the switc h.
With the c ursor at enter command:
, enter change network 
and press   to...

Page 142

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-14 DEFINITY AUDIX Administration 
9
Table 9-1. Network Group Screen Entries 
Field Description
Port Enter the p ort loc ation of the c orresp ond ing  voic e p ort. 
Network p ort 1 has the same p ort loc ation as voic e p ort 1 
on the Voic e Group  sc reen. Network p ort 2 has the same 
p ort loc ation as voic e p ort 2 on the Voic e Group  sc reen. 
This is the d ig ital port...

Page 143

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-15 DEFINITY AUDIX Administration 
9
Task 5: Verify Status of Networking Port(s)
Req uest a status of the networking  p orts on the Network Group  Status sc reen.
With the c ursor at enter command:
, enter status network-group 
and press 
 to req uest the networking  p ort status. The Network Group  Status sc reen 
d isp lays similar to the screen shown b elow. 
Figure 9-6....

Page 144

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-16 DEFINITY AUDIX Administration 
9
Task 6: Test the Networking Ports
Test eac h networking  p ort. 
With the c ursor at enter command:
, enter test network-port 
port location 
(the 
Port field  from the Network Group  sc reen) 
and  p ress   . A screen similar to 
the following  d isp lays. 
Figure 9-7. Begin Test Network Port Screen
Pre s s  
(F3) to execute the test.
ENTER...

Page 145

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-17 DEFINITY AUDIX Administration 
9
When the test is c omp lete, the results d isp lay on the Test Networking  Port Results 
sc reen similar to the sc reen shown b elow. 
Figure 9-8. Test Networking Port Results Screen
The Test Pass c olumn should  d isp lay a 1 for eac h resourc e. If 0 is d isp layed  for a 
resourc e, refer to 
DEFINITY AUDIX System Maintenanc e, 585-300-110...

Page 146

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-18 DEFINITY AUDIX Administration 
9
Task 7: Change the Local Machine Profile Screen
Ad d  d ig ital networking information to the Mac hine Profile sc reen for the loc al 
DEFINITY AUDIX system. Refer to the information rec eived  from the d esign 
c enter when c omp leting  this sc reen.
With the c ursor at enter command:
, enter change machine 
machine name 
(the name of the loc...

Page 147

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-19 DEFINITY AUDIX Administration 
9
Pag e 2 of the Mac hine Profile sc reen is similar to the sc reen shown b elow. Refer 
to the following  table to c omp lete the sc reen.
Figure 9-10.Local Machine Profile Screen — Page 2
The Dial String  in the ab ove examp le is the Hunt Group  numb er for the d ig ital 
networking  p ort hunt g roup  set up  d uring  switc h ad ministration....

Page 148

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-20 DEFINITY AUDIX Administration 
9
Mod em 
St r in gLeave this field  b lank. This field  is c urrently not b eing  used .
Data Rate
This field  is used  only when this system c alls itself for testing  p urp oses. 
Enter the d ata rate used  b y the dig ital networking  p orts for test mac hine on 
the loc al DEFINITY AUDIX system (9600
, 19200
, 56000
, or 64000
). This 
d ata...

Page 149

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-21 DEFINITY AUDIX Administration 
9
Updates 
OutFor now, leave this field  set to n
 sinc e this will simp lify testing. After testing  
is c omp lete, set this field  to y
 if you want to ac tivate the remote up d ates 
feature. 
En t e r  y
 if sub sc rib er information up dates for loc al sub sc rib ers may b e sent 
to a remote system (the Up d ates Out field  must b e set to...

Page 150

DEFINITY AUDIX System Digital Networking  585-300-534  Issue 2
May 1999
Initial Network Administration and Acceptance Tests 
9-22 DEFINITY AUDIX Administration 
9
Task 8: Perform a Local Machine Test
If the numb er of networking  p orts is g reater than one, exec ute a test of the loc al 
mac hine.
With the c ursor at enter command:
, enter: 
test machine local 
or
test machine local <
network port location> 
(op tionally sp ecify p ort) 
or 
test machine 
machine name 
(the name of the loc al DEFINITY...
Start reading Lucent Technologies Definity Audix System Digital Networking Guide

Related Manuals for Lucent Technologies Definity Audix System Digital Networking Guide

All Lucent Technologies manuals