Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies Definity Application Notes For Type Approval Manual
Lucent Technologies Definity Application Notes For Type Approval Manual
Have a look at the manual Lucent Technologies Definity Application Notes For Type Approval Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 293 Japan Luc c ent rec ommend s only the following c all typ es b e used outsid e North Americ a: System Parameter Administration Only those feature-related p arameters that may have a Typ e Ap p roval or b asic c onnec tivity imp lic ation for a p artic ular c ountry are listed here. n Feature-Related System Parameters Ad ministration — Trunk-to-Trunk Transfer: Permitted b y c ountry’s reg ulations - Selec tion is c ustomer’s c hoic e. — Pub lic Network Trunks on Conferenc e Call: 5 — Conferenc e Parties With PNTs: 6 — Conferenc e Parties Without PNTs: 6 — Line Interc ep t Tone Timer: 30 — Nig ht Servic e Disc onnec t Timer: 180 sec — Short Interd ig it Timer: 3 sec — Unanswered DID Call Timer: 60 —Auto-Hold: Yes 13 — Attend ant Tone: Yes — Bridg ing Tone: No — Conferenc e Tone: No — Intrusion Tone: Yes — Rep etitive Call Waiting Tone: No — DID Busy Treatment: Attend ant — Pull Transfer: No — Level of Tone Detec tion: Broad b and — Outp ulse Without Tone: Yes — (Station-to-switc h) Rec all Timing : nFlashhook Interval: Yes int: For all international numbers. natl: For all national PN numb ers. pubu: For all other external (that is, not extensions) numbers. 13. Althoug h not a Type App roval issue, this rep resents the convention for this country.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 294 Japan nUp p er Bound : 1000 ms nLower Bound : 200 ms nCountry Op tions Parameters — Comp and ing Mode: mu-law — Base Tone Generation Set: 3 — Tone Detec tion Mod e: d efault — Interdigit Pause: default — Dig ital Loss Plan: 3 — Analog Ringing Cadence: 3 Analog Trunk Administration nCO Trunks — Trunk Group Sc reen nGroup Typ e: CO nCountry Code: 3 nTrunk Gain: hig h nDirec tion: two-way nDig it Ab sorp tion List: b lank nPre f i x -1 : N o nTrunk Type: loop -start nOutg oing Dial Typ e: tone nTrunk Termination: rc (c omp lex imp ed anc e) nAuto Guard : no nDial Ac c ess: Yes nCall Still Held : no nTerminal Balanc ed : yes nRec eive Answer Sup ervision: no nAnswer Supervision Timeout: 10 (This sets both the CP firmware timer and software timer. Set to 0 for any trunk that will rec eive answer sup ervision.) nDisc onnec t Sup ervision - In: no
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 295 Japan nDisc onnec t Sup ervision - Out: Selec tion is c ustomer’s choice. nDisc onnec t Timing : 500 msec (This field will not b e used with CPs that c an ac c ep t the Inc oming Disc onnec t and Outg oing Disc onnec t timers. Set these latter two timers from the Ad ministrab le Timers Sc reen.) — Trunk Group Ad ministration Sc reen (Timing ) Set the following timers from the Administrab le Timers sc reen d uring ad ministration of eac h trunk g roup . Selec t the following CO trunk timer values for this c ountry: nInc oming Disc onnec t: 500 ms nOutg oing Disc onnec t: 500 ms nOutg oing Dial Guard : 1600 ms nInc oming Glare Guard : 1500 ms nOutg oing Glare Guard : 1500 ms nOutg oing Dial Pulse Rate (PPS): 10 p p s nOutg oing Rotary Dig it Dial Make: 35 ms nOutg oing Rotary Dig it Dial Break: 65 ms nOutg oing Rotary Dial Interd igit: 800 ms nRing Monitor Timer: 5200 ms nInc oming Seizure: 500 ms nOutg oing End -of-Dial: 10 sec nOutg oing Seizure Resp onse: 240 sec nProg rammed Dial Pause: 1500 ms nDisc onnec t Sig nal Error: 240 sec nEnd -To-End Sig naling Pause: 150 ms (ac c ep t d efault) nEnd -To-End Sig naling Tone: 350 ms (ac c ep t d efault) nFlash Leng th: 100 ms nPPM : n o nDID Trunks — Trunk Group Sc reen nGroup Typ e: DID nCountry: 3 nTrunk Gain: hig h nDig it Ab sorp tion List: b lank
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 296 Japan nInc oming Dial Typ e: tone nTrunk Type: loop -start nTrunk Termination: rc (c omp lex imp ed anc e) nDisc onnec t Sup ervision: no nDisc onnec t Timing : 500 msec (This field will not b e used with CPs that c an ac c ep t the Inc oming Disc onnec t and Outg oing Disc onnec t timers. Set these latter two timers from the Ad ministrab le Timers Sc reen.) nDig it Treatment: b lank nDig its: b lank nExp ec ted Dig its: d ep end s on system size and numb ering plan nTerminal Balanc ed : yes nExtend ed Loop Range: (Used Only with TN459) no nDrop Treatment: silenc e nInc oming Rotary Timeout (sec ): 5 sec (This field will not b e used with CPs that c an ac c ept the Inc oming Partial Dial timer. Set this timer from the Ad ministrab le Timers Sc reen.) — Trunk Group Ad ministration Sc reen (Timing ) Set the following timers from the Administrab le Timers sc reen d uring ad ministration of eac h trunk g roup . Selec t the following DID trunk timer values for this c ountry: nInc oming Disc onnec t: 500 ms nInc oming Dial Guard : 50 ms nInc oming Partial Dial: 18 sec nInc oming Inc omplete Dial: 255 sec nFlash Leng th: 100 ms nTi e Tru n k s No sp ec ial Typ e Ap p roval reg ulations ap ply. Tie trunks are ad ministered on a c ase-b y-c ase b asis. Digital Trunk Administration This sec tion d oes not list all p ossib le valid ad ministrable c omb inations. Rather the most c ommon or stand ard c ombination, c omp atib le with p ub lic -network and Typ e Ap proval stand ard s for eac h c ountry, is p resented : nCO Trunks Not availab le in this c ountry.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 297 Japan nDID Trunks Not availab le in this c ountry. nTi e Tru n k s — Non-ISDN Sig naling Examp le (DS1 Ad ministration Sc reen) nCirc uit Pac k: TN464D (or TN464C,TN767) nBit Rate: 1.544 nInterfac e Comp anding : mu-law nLine Cod ing: B8ZS nLine Comp ensation: 1 nFraming Mode: esf nSignaling Mode: common-chan nCountry Protoc ol: 1 nCRC?: no nId le Cod e: 11111111 (Id le c od e must c ontain at least 3 ones. Ac c ep t d efault.) nDMI-BOS? Yes — CAS Examp le (DS1 Ad ministration Sc reen) nCirc uit Pac k: TN2242 nBit Rate: 2.048 nInterfac e Comp anding : mu-law nLine Cod ing: c mi nSignaling Mode: cas nCountry Protoc ol: 3 nId le Cod e: 11111111 (Id le c od e must c ontain at least 3 ones. Ac c ep t d efault.) — ISDN-PRI (Private Network) Sig naling This examp le assumes use of US Op tion 1 with fac ility assoc iated sig naling . Other feature op tions will req uire c hang es in one or more ad ministered items. — DS1 Ad ministration sc reen nCirc uit Pac k: TN464D (or TN464C from up g rad es) nBit Rate: 2.048 nInterfac e Comp anding : A-law nLine Cod ing: HDB3 nSignaling Mode: isdn-pri
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 298 Japan nCountry Protoc ol: 1 nConnec t: p b x nInterfac e: user nCRC: No nId le Cod e: 11111111 — DS1 Ad ministration sc reen nCirc uit Pac k: TN2242 nInterfac e Comp anding : mu-law nLine Cod ing: c mi nSignaling Mode: isdn-pri nCountry Protoc ol: 3 nConnec t: p b x nInterfac e: user nId le Cod e: 11111111 nD-Channel: 1-3D (must matc h Sig naling Group sc reen) — Sig naling Group sc reen nAssoc iated Sig naling : Yes nPrimary D_Channel: xxxx16 (xxxx= > dep end s on CP p hysical location) — Sig naling Group sc reen nAssoc iated Sig naling : Yes nPrimary D_Channel: xxxxyy (xxxx= > dep end s on CP p hysical loc ation; yy= > d ep end s on D-c hannel ad ministered on DS1 sc reen) — Trunk Group Ad ministration sc reen nGroup Type: isdn-pri nServic e Type: tie — ISDN-PRI (Public Network) — DS1 Ad ministration sc reen nCirc uit Pac k: TN464C nBit Rate: 1.544 nInterfac e Comp anding : mu-law nLine Cod ing: B8ZS nLine Comp ensation: 1
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 299 Japan nFraming Mode: esf nSignaling Mode: isdn-pri nCountry Protoc ol: 3 nConnec t: Network nDMI-BOS? Yes nId le Cod e: 11111111 — Sig naling Group sc reen nAssoc iated Sig naling : Yes nPrimary D_Channel: xxxx16 (xxxx= > dep end s on CP p hysical location) — Trunk Group Ad ministration sc reen nGroup Type: isdn-pri nService Type: public_ntwrk 2Mbit Trunk (TN2242) The following outlines the req uired administration p arameters for this interfac e to op erate in Jap an. — Trunk Group sc reen nTrunk Type (in/out): wink, d elay, immed (all p ermutations) nTrunk Sig naling Typ e: b lank nAnswer Supervision Timeout: 0 nRec eive Answer Sup ervision: y nDisc onnec t Sup ervision-In: y nDisc onnec t Sup ervision-Out: y nInc oming Dial Typ e: tone, rotary, mf (to other DEFINITYs only) nWink Timer (msec ): 300 (when the Trunk Typ e (in/out) field is wink), 4500 (when the Trunk Typ e (in/out) field is d elay) — Trunk Group Ad ministration sc reen (Timing ) nInc oming Disc onnec t (msec ): 100 nInc oming Glare Guard (msec ): 800 or hig her nInc oming Dial Guard (msec ): 10 nInc oming Partial Dial (sec ): 18 nInc oming Inc omplete Dial Alarm (sec ): 25 or hig her nPPS: 10, 20
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 300 Japan nM a k e ( m s e c ): 3 5 ( w h e n t h e PPS f ie ld is 1 0 ), 1 5 ( w h e n t h e PPS f ie ld is 20) nBreak (msec ): 65 (when the PPS f i e ld i s 1 0 ) , 3 5 ( w h e n t h e PPS f ie ld is 20) nOutg oing Disc onnec t (msec ): 100 nOutg oing Glare Guard (msec ): 800 or hig her nOutg oing Rotary Dial Interd igit (msec ): 800 nOutg oing Seizure Resp onse (sec ): 5 Incoming Call Line Identification on Analog Trunks Inc oming Call Line Id entific ation (ICLID) p rovid es you with the c alling p arty name and numb er rec eived from the c entral offic e (CO). This oc c urs on a CO loop -start, DID, or DIOD trunk in Jap an. How to Administer ICLID To start ICLID, p erform the following : 1. On System-Parameters Customer-Op tions form, set the Analog Trunk Incoming Call ID field to y . 2. On Trunk Group form, set the: nGroup Type field to co , did , or diod . nReceive Analog Incoming Call ID field to NTT . nDirection field is incoming or two-way . 3. On Ad ministrab le Timers sec tion, set the Incoming Seizure (msec) to 120 . To stop ICLID, p erform the following : 1. On System-Parameters Customer-Op tions form, set the Analog Trunk Incoming Call ID field to n . 2. On Trunk Group form, set the Receive Analog Incoming Call ID field to disable. Hardware Requirement TN429D CO Trunk c irc uit p ac k or later c onfig uration
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 301 Japan Detailed Description In the US, the CO send s b oth c alling p arty name and numb er, if they are availab le; in Jap an, the CO send s only the c alling p arty numb er. Disp lay of c alling party information works with all DEFINITY ECS d igital voic e terminals (DCP and BRI) eq uip p ed with a 40-c harac ter or 32-c harac ter alphanumeric d isp lay. The analog voic e terminals supp orted are the 7315H and 7317H series (System 25/MERLIN sets sup p orted by DEFINITY). For the ICLID on analog trunks, DEFINITY ECS stores and d isp lays 15 c harac ters of name and numb er information. If a name/numb er is long er than 15 c harac ters, the name/numb er trunc ates to 15 c harac ters. In the ab senc e of c aller ID information, or in the c ase of a CO transmission error, the trunk g roup name and trunk ac c ess c ode d isp lay. Interactions nAttend ant Disp lay Features A red irec ted c all to either the attend ant or attend ant q ueue c auses the d isp lay on the attend ant’s station to read similar to that of the c onnec ted p arty station d isp lay. nAutomatic Disp lay of Inc oming Call Id entific ation If a new c all c omes in while the station user is off-hook and c onnec ted to a c all, the d isp lay automatic ally shows the new inc oming c all id entity for 30 sec ond s. After 30 sec ond s, the d isp lay returns to the selec ted c all. If the c all red irec ts after a few rings, the d isp lay returns to the selec ted c all. If an inc oming c all d rop s and that c all c urrently d isp lays, the d isp lay returns to the selected call. nBridged Call Incoming call identity displays on both the primary station and the bridged station. nCall Forward ing Forward ed -From Station Disp lay — no information d isp lays on the c alled p rinc ip al’s station. Forward ed -To Station Disp lay — shows the id entity of the c alling and c alled p arty and the reason (R) c od e. If the forwarded -to station is on a d ifferent switc h, the c alled p arty information d oes not forward . nCall Pic kup Called Party Station Disp lay — shows the calling party’s identity. Answering Party Station Disp lay — If Call Pic k-Up answers an ICLID c all, the d isp lay shows b oth the c alling p arty and the c alled princ ip al’s id entities.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 302 Japan nCall Coverag e Called Princip al’s Disp lay — The called p rinc ip al’s d isp lay shows the c alling p arty’s id entity until the c overag e p arty answers the c all. If the coverage party answers the call, the principal’s station display becomes b lank. If the c alled p rinc ip al temp orarily b rid g es in after the c overag e p arty answers the c all, then the c overag e p arty and the c alled p rinc ipal’s d isp lays c hang e to ind ic ate a c onferenc e c all. Coverag e User Station Disp lay — The c overag e user’s station d isp lay shows the same d isp lay as the c onnec ted p arty station display. nCall Vec tor Routing When an ICLID c all c oming from analog trunks transfers to a Vec tor Direc tory Number (VDN), the inc oming c alling numb er is d irec ted to VDN so c all vec tor routing c an b e based on the ICLID information. The ANI rec eived for the inc oming c all (via inb and or ISDN) forward s with a route-to step over a trunk that sup p orts ANI d elivery (inb and or ISDN). nDCS Feature Interac tion If the DEFINITY ECS has b oth DCS and ISDN d isp lay features, the ICLID information d isp lays in DCS formats. nHold When ac tivated , the d isp lay b ec omes blank. The p arty ac tivating the Hold read s the newly c onnec ted p arty’s id entity. The held station’s d isp lay remains unc hang ed . When the p arty unhold s, the d isp lay refreshes to indic ate the c all’s c urrent state. nMalic ious Call Trace When ac tivated for a p artic ular c all, MCT d isp lays inc oming c alling numb ers to c ontroller stations. nTand em Op erations The c alling p arty name/numb er p asses to the terminating switc h over ISDN trunks with DCS+ . nTransfer When an ICLID c all transfers, the d isp lay of the transferred -from station b ec omes b lank. The transferred -to station d isp lays the id entity of the transferred -from party if the transfer is not yet c omp leted . Onc e the transfer c omp letes, the transferred -to station d isp lays the identity of the calling p arty.