Home > Lucent Technologies > Communications System > Lucent Technologies Definity Application Notes For Type Approval Manual

Lucent Technologies Definity Application Notes For Type Approval Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lucent Technologies Definity Application Notes For Type Approval Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 484
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    153 Ecuador 
    Ecuador
    The information p rovid ed  here is p reliminary and  sub jec t to c hang e. Ta b l e  2 6 
    shows the rec ommend ed  c irc uit p ac ks.
    Table 26. Recommended and Available CPs in Ecuador
    Equipment Equipment Type
    Cab inet Typ e & Power GAC-MCC AC-MCC DC-MCC AC-SCC 
    DC-SCC AC-CSCC AC-CMC
    AC Power Voltag e & Freq 120V/60Hz 240V/60Hz
    Ring  Generator 20Hz
    Tone Detec tor > TN2182B > TN744D
    Tone Cloc k > TN2182B
    R2MFC Circ uit
    Sp eec h Synthesizer
    Call Classifier > TN744D
    Announc ement TN750C TN750B 
    Analog  DID Trunk
    Analog  CO Trunk (No PPM)  > TN747B
    Analog  CO Trunk (w/PPM)
    4 Wire Tie Trunk
    2 Wire Tie Trunk
    Auxiliary Trunk > TN763D 
    Dig ital CO/DID Trunk > TN464F TN464E TN464D
    Dig ital Tie Trunk > TN464F TN464E TN464D
    Dig ital PRI CO Trunk n/a
    Dig ital BRI Trunk
    Dig ital Converter PRI-DASS   
    Dig ital Converter PRI-DPNSS
    Dig ital Converter PRI-BRI   
    8 Port Analog  Line n/a
    16 Port Analog  Line > TN746B
    Continued on next page 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    154 Ecuador 
    NOTE:
    A-law c ompand ing  is the national stand ard  in Ec uad or. However, 
    Mu-law is used  internally to the system for servic e c irc uits and  
    analog  lines. Network interfac es are c onfig ured  as A-law if req uired .
    Feature Administration
    The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e 
    ap p roval was award ed . The sc reens may have c hang ed  sinc e that d ate.
    Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
    c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
    nARS/AAR Ad ministration
    To enab le ARS administration, on the System-Parameters 
    Customer-Op tions sc reen, set the ARS
     field  to y
    . You also should check all 
    ARS/AAR d efaults. All d efault ARS analysis c odes are deleted  b efore 
    d ialed  strings are ad d ed for routing when DEFINITY is installed  outsid e of 
    North Americ a. Be aware that the d efault for the 10 d ig its c ause dialing 
    p rob lems. In p artic ular, the following  c all typ es (ap pear as ARS/AAR 
    d efaults) typ ic ally are not used  in non-North Americ an ARS/AAR tab les: 24 Port Analog  Line n/a
    4 Wire Digital Line > TN754B 
    2 Wire Digital Line #TN2224 > TN2181 TN2136
    Data Line > TN726B 
    BRI-U Line
    BRI-ST Line
    fnp a: North Americ an numb ers with an area c od e.
    hnp a: North Americ an numb ers without an area c od e.
    svc : North Americ an numb ers of the screen ‘‘x11’’.
    Ta b l e  2 6 .Recommended and Available CPs in Ecuador — Continued
    Equipment Equipment Type
    Continued on next page 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    155 Ecuador 
    Luc ent rec ommend s only the following  c all typ es b e used  outside North 
    Americ a:
    System Parameter Administration
    Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
    c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
    nFeature-Related System Parameters Ad ministration
    — Trunk-to-Trunk Transfer: Permitted  b y c ountry’s reg ulations - 
    Selec tion is c ustomer’s c hoic e.
    — Pub lic  Network Trunks on Conferenc e Call: 5
    — Conferenc e Parties With PNTs: 6
    — Conferenc e Parties Without PNTs: 6
    — Line Interc ep t Tone Timer: 30
    — Nig ht Servic e Disc onnec t Timer: 180 sec
    — Short Interd ig it Timer: 3 sec
    — Unanswered  DID Call Timer: 60 
    —Auto-Hold: Yes 
    5
    — Attend ant Tone: Yes
    — Bridg ing  Tone: No
    — Conferenc e Tone: No
    — Intrusion Tone: Yes
    — Rep etitive Call Waiting Tone: No
    — DID Busy Treatment: Attend ant
    — Pull Transfer: No
    — Level of Tone Detec tion: Med ium
    — Outp ulse Without Tone: Yes
    — (Station-to-switc h) Rec all Timing :
    nFlashhook Interval: No 
    nDisc onnec t Timing : 350 ms int: For all international numb ers.
    natl: For all national PN numb ers.
    p ub u: For all other external (that is, not extensions) numb ers.
    5. Althoug h not a Type App roval issue, this rep resents the convention for this country. 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    156 Ecuador 
    nSystem Parameter Country Op tions Ad ministration
    — Comp and ing  Mode: A-law
    — Base Tone Generation Set: 
    — Tone Detec tion Mod e: 2
    — Interd ig it Pause: short
    — Dig ital Loss Plan: 
    — Analog Ringing Cadence: 
    Analog Trunk Administration
    nCO Trunks
    — Trunk Group  Sc reen
    nGroup  Typ e: CO 
    nCountry: 
    nTrunk Gain: hig h
    nDirec tion: two-way 
    nDig it Ab sorp tion List: b lank 
    nPre f i x -1 :  N o
    nTrunk Type: loop -start 
    nOutg oing  Dial Typ e: tone 
    nTrunk Termination: 600 ohm
    nAuto Guard : no 
    nDial Ac c ess: Yes
    nCall Still Held : no 
    nTerminal Balanc ed : yes 
    nRec eive Answer Sup ervision: no 
    nAnswer Supervision Timeout: 10 (This sets both the CP 
    firmware timer and  software timer. Set to 0 for any trunk 
    rec eiving  answer supervision.)
    nDisc onnec t Sup ervision - In: yes
    nDisc onnec t Sup ervision - Out: Selec tion is c ustomer’s 
    choice.
    nDisc onnec t Timing : 100 ms (This field  will not be used  with 
    CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
    Disc onnec t timers. Set these latter two timers from the 
    Ad ministrab le Timers Sc reen.) 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    157 Ecuador 
    — Trunk Group  Ad ministration Sc reen (Timing )
    Set the following  timers from the Administrab le Timers sc reen 
    d uring ad ministration of eac h trunk g roup . Selec t the following  CO 
    trunk timer values for this c ountry:
    nInc oming  Disc onnec t: 100 ms
    nOutg oing  Disc onnec t: 100 ms
    nOutg oing  Dial Guard : 3000 ms 
    nInc oming  Glare Guard : 1500 ms 
    nOutg oing  Glare Guard : 1500 ms 
    nOutg oing  Dial Pulse Rate (PPS): 10 p p s
    nOutg oing  Rotary Dig it Dial Make: 40 ms
    nOutg oing  Rotary Dig it Dial Break: 60 ms
    nOutg oing  Rotary Dial Interd igit: 800 ms
    nRing  Monitor Timer: 5200 ms
    nInc oming  Seizure: 500 ms
    nOutg oing  End -of-Dial: 255 sec
    nOutg oing  Seizure Resp onse: 0 
    nProg rammed  Dial Pause: 3 sec
    nDisc onnec t Sig nal Error: 240 sec
    nEnd -To-End  Sig naling  Pause: 150 ms (ac c ep t d efault)
    nEnd -To-End  Sig naling  Tone: 350 ms (ac c ep t d efault)
    nFlash Leng th: 100 ms
    nPPM :  N o
    nDID Trunks
    — Trunk Group  Sc reen
    — Group  Typ e: DID
    nCountry: 
    nTrunk Gain: hig h
    nDig it Ab sorp tion List: b lank 
    nInc oming  Dial Typ e: tone
    nTrunk Type: immed -start
    nTrunk Termination: rc  (c omp lex imp ed anc e)
    nDisc onnec t Sup ervision: no 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    158 Ecuador 
    nDisc onnec t Timing : 500 ms (This field  will not be used  with 
    CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
    Disc onnec t timers. Set these latter two timers from the 
    Ad ministrab le Timers Sc reen.)
    nDig it Treatment: b lank 
    nDig its: b lank 
    nExp ec ted  Dig its: d ep end s on system size and  numb ering  
    plan
    nTerminal Balanc ed : yes 
    nRA Trunk Loss: 0d B 
    nExtend ed  Loop  Range: (Used  Only with TN459) no 
    nDrop  Treatment: silenc e 
    nInc oming  Rotary Timeout (sec ): 5 sec  (This field  will not b e 
    used  with CPs that c an ac c ept the Inc oming  Partial Dial 
    timer. Set this timer from the Ad ministrab le Timers Sc reen.)
    — Trunk Group  Ad ministration Sc reen (Timing )
    Set the following  timers from the Administrab le Timers sc reen 
    d uring ad ministration of eac h trunk g roup . Selec t the following  DID 
    trunk timer values for this c ountry:
    nInc oming  Disc onnec t: 100 ms
    nInc oming  Dial Guard : 10 ms
    nInc oming  Partial Dial: 18 sec
    nInc oming  Inc omplete Dial: 255 sec
    nTi e  Tru n k s
    No information regard ing  Typ e App roval-related  setting s is c urrently 
    availab le.
    Digital Trunk Administration
    This sec tion d oes not list all p ossib le valid  ad ministrable c omb inations. Rather 
    only the most c ommon or standard  c omb ination, c omp atib le with p ub lic -network 
    and  Typ e Ap p roval stand ard s for eac h c ountry, is p resented :
    nCO Trunks
    — DS1 Ad ministration Sc reen 
    6
    — Circ uit Pac k: TN464D (not entered  as an ad ministrab le item)
    nBit Rate: 2.048
    6. DS1 is also analog ous to the term E1 that has b een c oined  for the European T1 or 2 mb it 
    interfac e. 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    159 Ecuador 
    nInterfac e Comp anding : A-law
    nLine Cod ing: HDB3
    nSignaling Mode: CAS
    nCountry Protoc ol: 
    nInterc onnec t: CO
    nCRC?: No
    nId le Cod e: 01010100 
    — Trunk Group  Ad ministration Sc reen (Timing )
    Dig ital trunk timing  values should  b e set as for analog  CO trunks.
    nDID Trunks
    — DS1 Ad ministration Sc reen
    nCirc uit Pac k: TN464D (not entered as an ad ministrab le item)
    nBit Rate: 2.048
    nInterfac e Comp anding : A-law
    nLine Cod ing: HDB3
    nSignaling Mode: CAS
    nCountry Protoc ol: 
    nInterc onnec t: CO
    nCRC?: No
    nId le Cod e: 01010100 
    — Trunk Group  Ad ministration Sc reen (Timing )
    Set d ig ital trunk timing  values the same as for analog  DID trunks.
    nTi e  Tru n k s
    — Non-ISDN Sig naling  Examp le (DS1 Ad ministration Sc reen)
    nCirc uit Pac k: TN464D (Not entered  as ad ministrab le item; 
    TN464C from up g rad es)
    nBit Rate: 2.048
    nInterfac e Comp anding : A-law
    nLine Cod ing: HDB3
    nSignaling Mode: CAS
    nCountry Protoc ol: 
    nInterc onnec t: p b x
    nCRC?: no
    nId le Cod e: 01010100  
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    160 Ecuador 
    — ISDN-PRI (Private Network) Sig naling
    This examp le assumes use of US Op tion 1 with fac ility assoc iated  
    sig naling . Other feature op tions will req uire c hang es in one or more 
    ad ministered  items.
    — DS1 Ad ministration sc reen
    nCirc uit Pac k: TN464D (or TN464C from up g rad es)
    nBit Rate: 2.048
    nInterfac e Comp anding : A-law
    nLine Cod ing: HDB3
    nSignaling Mode: isdn-pri
    nCountry Protoc ol: 1
    nConnec t: p b x
    nInterfac e: user 
    nCRC: No
    nId le Cod e: 01010100 
    — Sig naling  Group  sc reen
    nAssoc iated Sig naling : Yes
    nPrimary D_Channel: xxxx16 (xxxx= > dep end s on 
    CP p hysical location)
    — Trunk Group  Ad ministration sc reen
    nGroup Type: isdn-pri
    nServic e Type: tie
    — ISDN-PRI (Public  Network
    Not availab le for this c ountry. 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    161 France 
    France
    Ta b l e  2 7 shows the rec ommended  c irc uit p ac ks.
    Table 27. Recommended and Available CPs in France 
    Equipment Equipment Type
    Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC AC-CSCC 
    AC-CMC
    AC Power Voltag e & Freq 220V/50Hz 
    Ring  Generator 50Hz (See the note that follows this tab le.)
    Tone Detec tor > TN2182B > TN744D
    Tone Cloc k > TN2182B
    R2MFC Circ uit n/a
    Speech Synthesizer > TN457
    Call Classifier > TN744D
    Announc ement TN750C TN750B 
    Analog  DID Trunk n/a
    Analog  CO Trunk (No PPM)  n/a
    Analog  CO Trunk (w/PPM) n/a
    4 Wire Tie Trunk > FTN760D
    2 Wire Tie Trunk n/a
    Auxiliary Trunk n/a
    Dig ital CO/DID Trunk > TN464F 
    D i g i t a l  Ti e  Tr u n k > TN 4 6 4 F 
    Dig ital PRI CO Trunk > TN464F 
    Dig ital BRI Trunk > TN2185
    Dig ital Converter PRI-DASS   
    Dig ital Converter PRI-DPNSS
    Dig ital Converter PRI-BRI    #TN-PRI-BRI
    8 Port Analog  Line n/a
    16 Port Analog  Line > TN2183
    24 Port Analog  Line n/a
    Continued on next page 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    162 France 
    NOTE:
    50Hz ring  g eneration req uires modific ation to all b ac kp lanes with p ort slots 
    and  installation of a TN2202 Ring  Generator (50Hz) c irc uit p ac k.
    Also, you c an use the 122A Music -on-Hold  Interfac e in Franc e.
    Feature Administration
    The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e 
    ap p roval was award ed . The sc reens may have c hang ed  sinc e that d ate.
    Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
    c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
    NOTE:
    All systems for Franc e req uire mod ific ations to p rovid e 50Hz ring  
    g eneration. This req uires mod ific ations to all b ac kplanes with port slots and  
    installation of a TN2202 Ring  Generator (50Hz) c irc uit p ac k in all c arriers 
    with these mod ified  b ac kp lanes.
    NOTE:
    The 122A Music -on-Hold  Interfac e is used  for Franc e.
    n ARS/AAR Ad ministration
    To enab le ARS administration, on the System-Parameters 
    Customer-Op tions sc reen, set the ARS
     field  to y
    . You also should check all 
    ARS/AAR d efaults. All d efault ARS analysis c odes are deleted  b efore 
    d ialed  strings are ad d ed for routing when DEFINITY is installed  outsid e of 
    North Americ a. Be aware that the d efault for the 10 d ig its c ause dialing 
    p rob lems. In p artic ular, the following  c all typ es (ap pear as ARS/AAR 
    d efaults) typ ic ally are not used  in non-North Americ an ARS/AAR tab les: 4 Wire Digital Line > TN754B 
    2 Wire Digital Line #TN2224 > TN2181
    Data Line > TN726B 
    BRI-U Line
    BRI-ST Line  TN556B
    Ta b l e  2 7 .Recommended and Available CPs in France  — Continued
    Equipment Equipment Type
    Continued on next page 
    						
    All Lucent Technologies manuals Comments (0)

    Related Manuals for Lucent Technologies Definity Application Notes For Type Approval Manual