Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies Definity Application Notes For Type Approval Manual
Lucent Technologies Definity Application Notes For Type Approval Manual
Have a look at the manual Lucent Technologies Definity Application Notes For Type Approval Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
243 Hungary
change system-parameters multifrequency-signaling Page 2 of 3
MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
INCOMING FORWARD SIGNAL TYPES INCOMING BACKWARD SIGNAL TYPES
(Tones from CO) (Tones to CO)
Group-I Group-II Group-A Group-B
11: ignored 1: normal1 : next-digit 1 : busy
12: ignored 2: normal3 : end-of-dial 2 : congestion
13: ignored 3: normal4 : congestion4 : free
14: ignored 4: normal7 : intercept
15: ignored 5: normal : :
6: data-call : :
7: normal : :
8: normal : :
9: normal : :
10: normal : :
11: normal : :
12: normal : :
13: normal : :
14: normal : :
15: normal : :
change system-parameters multifrequency-signaling Page 3 of 3
MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
OUTGOING FORWARD SIGNAL TYPES OUTGOING BACKWARD SIGNAL TYPES
(Tones from CO) (Tones to CO):
GROUP-I GROUP-II GROUP-A GROUP-B
15: end-of-digits 1: normal
1: attendant
6: data-call1: next-digit
2: last-digit
3: end-of-dial
4: congestion
5: call-info-ani
6: setup-sppath
7: last-2-digits
8: last-3-digits
9: restart
10: congestion
11: congestion
12: congestion
13: congestion
14: congestion
15: congestion1: congestion
2: congestion
3: busy
4: congestion
5: intercept
6: free
7: free
8: congestion
9: congestion
10: congestion
11: congestion
12: congestion
13: congestion
14: congestion
15: congestion
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 244 Hungary Hungarian Private Network Administration For this feature to work in Hung ary, fill out the following : — Dial Plan Rec ord sc reen nFirst Dig it 0: misc nSec ond Digit 03: FAC — Feature Ac c ess Cod e sc reen nAAR access code: 03 — Multifreq uenc y-Sig naling -Related System Parameters sc reen (first page) nReq uest Inc oming ANI (non-AAR/ARS): n nPrivate Group II Permissions and Pub lic Interworking : y nOverlap Send ing on Link-to-Link Tand em Calls: y nCollec t all dig its b efore seizure: n — Multifreq uenc y-Sig naling -Related System Parameters sc reen (subsequent page) nTones from CO on Inc oming Forward Calls-Group I: I15 = end-of-ani nConvert initial end-of-ani sig nal to dig its: 0 nTones to CO on Outg oing Forward Calls -Group I: I15 = end-of-digit nTones from CO on Inc oming Forward Call-Group II n: normal (for eac h n that is ad ministered as Class of Restric tion Categ ory for MFC ANI:n) nTones to CO on Inc oming Bac kward Calls-Group A: A5: send -ani — Tie trunk group screen nTrunk Type: imed /imed nInc oming Dial Typ e: mf nOutg oing Dial Typ e: mf nInc oming d ig it treatment: inserted d ig its nInserted d ig its field s: 03 — DID trunk g roup sc reen nInc oming Dial Typ e: mf nTrunk Type: imed -start
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 245 Hungary nInc oming d ig it treatment: inserted d ig its nInserted d ig its field s: 03 — AAR Dig it Conversion Tab le (for long -d istanc e p rivate-network c all) nMatc h. Pat.: 0 nmin: 3 nmax: 7 ndel: 0 nRep l String : nNet: AAR nConv: n nANI req: n — AAR Digit Conversion Table (for tandem local-area private-network call) nMatc h. Pat.: 12 nmin: 4 nmax: 4 ndel: 0 nRep l String : nNet: AAR nConv: n nANI req: n — AAR Dig it Conversion Tab le (for terminating p rivate-network c all) nMatc h. Pat.: 22 nmin: 4 nmax: 4 ndel: 0 nRep l String : nNet: ext nConv: n nANI req: n — AAR Digit Conversion Table (for terminating DID c all from public network) nMatc h. Pat.: 12 nmin: 4
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 246 Hungary nmax: 4 ndel: 0 nRep l String : nNet: ext nConv: n nANI req: n — AAR Digit Conversion Table (for terminating DID c all to special emergenc y servic e p rovid ing extension) nMatc h. Pat.: 07 nmin: 2 nmax: 2 ndel: 2 nRepl String: 1000 (for example) nNet: ext nConv: n nANI req: y — Class of Restric tion sc reens (COR #1 – COR #8) nCateg ory for MFC ANI: 1 – 8 (resp ec tively) — AAR Route Pattern sc reen nNo. Del. d ig its: 1 or 3 nInserted d ig its: * (If No. Del. dig its = 1. Leave b lank if No. Del. digits = 3)
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 247 India India Ta b l e 3 4 shows the rec ommended c irc uit p ac ks. Table 34. Recommended and Available CPs in India Equipment Equipment Type Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC AC-CSCC AC-CMC AC Power Voltag e & Freq 220V/50Hz Ring Generator 25Hz Tone Detec tor #TN2182B #TN744D Tone Cloc k #TN2182B R2MFC Circ uit n/a Sp eec h Synthesizer #TN433 Call Classifier > TN744D Announc ement #TN750C Analog DID Trunk #TN753 Analog CO Trunk (No PPM) #TN747B Analog CO Trunk (w/PPM) #TN465C 4 Wire Tie Trunk #TN760D 2 Wire Tie Trunk Auxiliary Trunk #TN763D Dig ital CO/DID Trunk > TN464Fv5 D i g i t a l Ti e Tr u n k > TN 4 6 4 Fv 5 Dig ital PRI CO Trunk Dig ital BRI Trunk Dig ital Converter PRI-DASS Dig ital Converter PRI-DPNSS Dig ital Converter PRI-BRI 8 Port Analog Line n/a 16 Port Analog Line #TN2183 24 Port Analog Line TN2793 Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 248 India NOTE: A-law c ompand ing is the national stand ard in Ind ia. However, Mu-law is used internally to the system for servic e c irc uits and analog lines. Network interfac es are c onfig ured as A-law if req uired . Feature Administration The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e ap p roval was award ed . The sc reens may have c hang ed sinc e that d ate. Only those feature-related p arameters that may have a Typ e Ap p roval or b asic c onnec tivity imp lic ation for a p artic ular c ountry are listed here. nARS/AAR Ad ministration In the AAR Dig it Conversion tab le, d elete all d efault entries. In the IXC tab le, d elete all d efault values on p ag e 2. To enab le ARS administration, on the System-Parameters Customer-Op tions sc reen, set the ARS field to y . You also should check all ARS/AAR d efaults. All d efault ARS analysis c odes are deleted b efore d ialed strings are ad d ed for routing when DEFINITY is installed outsid e of North Americ a. Be aware that the d efault for the 10 d ig its c ause dialing p rob lems. In p artic ular, the following c all typ es (ap pear as ARS/AAR d efaults) typ ic ally are not used in non-North Americ an ARS/AAR tab les: 4 Wire Digital Line #TN754C 2 Wire Digital Line #TN2224 Data Line #TN726B BRI-U Line #TN2198 BRI-ST Line fnp a: North Americ an numb ers with an area c od e. hnp a: North Americ an numb ers without an area c od e. svc : North Americ an numb ers of the sc reen ‘‘x11’’. Ta b l e 3 4 .Recommended and Available CPs in India — Continued Equipment Equipment Type Continued on next page
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
249 India
Luc ent rec ommend s only the following c all typ es b e used outside North
Americ a:
System Parameter Administration
Only those feature-related p arameters that may have a Typ e Ap p roval or b asic
c onnec tivity imp lic ation for a p artic ular c ountry are listed here.
Feature-Related System Parameters
int: For all international numb ers.
natl: For all national PN numbers.
p ub u: For all other external (that is, not extensions)
numbers.
Page 1 of 6
FEATURE-RELATED SYSTEM PARAMETERS
Trunk-to-Trunk Transfer: all
Coverage Subsequent Redirection/CFWD No Answer Interval: 2
Coverage - Caller Response Interval (seconds): 4
Keep Held SBA at Coverage Point? y
Automatic Callback - No Answer Timeout Interval (rings): 3
Call Park Timeout Interval (minutes): 10
Off-Premises Tone Detect Timeout Interval (seconds): 20
AAR/ARS Dial Tone Required? y
Music/Tone on Hold: tone
Music (or Silence) on Transferred Trunk Calls? no
DID/Tie/ISDN Intercept Treatment: attd
Messaging Service Adjunct (MSA) Connected? n
Internal Automatic Answer for Attendant Extended Calls? n
Automatic Circuit Assurance (ACA) Enabled? n
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
250 India
Page 2 of 6
FEATURE-RELATED SYSTEM PARAMETERS
LEAVE WORD CALLING PARAMETERS
Maximum Number of Messages Per Station (when MSA not in service):10
Stations with System-wide Retrieval Permission (enter extension)
1: 2: 3: 4: 5:
6: 7: 8: 9: 10:
WARNING! SEE USER DOCUMENTATION BEFORE CHANGING TTI STATE
Terminal Translation Initialization (TTI) Enabled? n
Prohibit Bridging Onto Calls With Data Privacy? n
Enhanced Abbreviated Dial Length (3 or 4): 3
Call Forward Override? n
External Coverage Treatment for Transferred Incoming Calls? n
SECURITY VIOLATION NOTIFICATION (SVN) PARAMETERS HAVE MOVED TO
THE SYSTEM-PARAMETERS SECURITY SCREEN
Page 3 of 6
FEATURE-RELATED SYSTEM PARAMETERS
Reserved Slots for Attendant Priority Queue: 5
Time before Off-hook Alert: 10
Emergency Access Redirection Extension:
Service Observing Warning Tone? y
Number of Emergency Calls Allowed in Attendant Queue: 5
Call Pickup Alerting? n
Deluxe Paging and Call Park Timeout to Originator? n
Controlled Outward Restriction Intercept Treatment: tone
Controlled Termination Restriction (Do Not Disturb): tone
Controlled Station to Station Restriction: tone
AUTHORIZATION CODE PARAMETERS Authorization Codes Enabled? n
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
251 India
Page 4 of 6
FEATURE-RELATED SYSTEM PARAMETERS
SYSTEM PRINTER PARAMETERS
System Printer Extension: Lines Per Page: 30
EIA Device Bit Rate: 9600
SYSTEM-WIDE PARAMETERS
Switch Name: H.V.NET THANE
CALL CENTER SYSTEM PARAMETERS
CALL MANAGEMENT SYSTEM PARAMETERS
BCMS/VuStats Measurement Interval: hour
BCMS/VuStats Abandon Call Timer (seconds): Validate Login IDs? n
ACD Login Identification Length: 0 Adjunct CMS Release:
MALICIOUS CALL TRACE PARAMETERS
Apply MCT Warning Tone? n MCT Voice Recorder Trunk Group:
Page 5 of 6
FEATURE-RELATED SYSTEM PARAMETERS
Public Network Trunks on Conference Call: 5
Conference Parties with Public Network Trunks: 6
Conference Parties without Public Network Trunks: 6
Night Service Disconnect Timer (seconds): 180
Short Interdigit Timer (seconds): 5
Unanswered DID Call Timer (seconds):
Line Intercept Tone Timer (seconds): 30
Auto Start? n
Auto Hold? n
Attendant Tone? y
Bridging Tone? y
Bridging Tone? n
Conference Tone? n
Intrusion Tone? n
DID Busy Treatment: tone
Allow AAR/ARS Access from DID/DIOD? n
DISTINCTIVE AUDIBLE ALERTING
Internal: 1 External: 2 Priority: 3
Attendant Originated Calls: external
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
252 India
System Parameters Country-Options
Page 6 of 6
FEATURE-RELATED SYSTEM PARAMETERS
Pull Transfer: n Update Transferred Ring Pattern? n
Outpulse Without Tone? y Wait Answer Supervision Timer? n
Misoperation Alerting? n Repetitive Call Waiting Tone? y
Allow Conference via Flash? y Repetitive Call Waiting Interval (sec): 16
Vector Disconnect Timer (min): Network Feedback During Tone Detection? y
System Updates Time On Station Displays? n
Intercept Treatment On Failed Trunk Transfers? n
Station Tone Forward Disconnect: silence
Level Of Tone Detection: precise
RECALL TIMING
Flashhook Interval? y Upper Bound (msec): 760
Lower Bound (msec): 200
Forward Disconnect Timer (msec): 600
ENHANCED DCS
Enhanced DCS Enabled? n
Page 1 of 21
SYSTEM PARAMETERS COUNTRY-OPTIONS
Companding Mode: Mu-Law Base Tone Generator Set: 1
440Hz PBX-dial Tone? n 440Hz Secondary-dial Tone? n
Digital Loss Plan: 1
Analog Ringing Cadence: 1 Set Layer 1 timer T1 to 30 seconds? n
Analog Line Transmission: 1 Enhanced 84xx Display Character Set? n
TONE DETECTION PARAMETERS
Tone Detection Mode: 6
Interdigit Pause: short