Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies Definity Application Notes For Type Approval Manual
Lucent Technologies Definity Application Notes For Type Approval Manual
Have a look at the manual Lucent Technologies Definity Application Notes For Type Approval Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 193 Germany nDig it Ab sorp tion List: b lank nTrunk Type: loop -start nInc oming Dial Typ e: rotary nOutg oing Dial Typ e: rotary nTrunk Termination: rc (c omp lex imp ed anc e) nDig it Treatment: b lank nDig its: b lank nExp ec ted Dig its: (d ep end s on system size and numb ering plan) nTrunk Gain: low nParameters b ased on loop leng th (whic h itself is not ad ministrable). nDrop Treatment: silenc e nDisc onnec t Sup ervision - In: nAnalog Trunks: no nDig ital Trunks: yes nDisc onnec t Sup ervision - Out: no nSup p ress # Outpulsing : yes — Trunk Group Ad ministration Sc reen (Timing ) Set the following timers from the Administrab le Timers sc reen d uring ad ministration of eac h trunk g roup . Selec t the following DID trunk timer values for this c ountry: nInc oming Disc onnec t: 600 ms nOutg oing Disc onnec t: 500 ms nInc oming Dial Guard : 70 ms nOutg oing Dial Guard : 1600 ms nOutg oing Glare Guard : 100 ms Note: This b loc ks outg oing c all attemp ts for 100 ms after p revious release of trunk nInc oming Glare Guard : 100 ms Note: This b loc ks inc oming c all attemp ts for 100 ms after p revious release of trunk nInc oming Partial Dial: 18 sec Loop Length Terminal Balance RA Trunk Loss short n 0dB long n 2dB
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 194 Germany nOutg oing Rotary Dial Interd igit: 800 ms nRing Monitor Timer: 5200 ms nInc oming Seizure: 500 ms nOutg oing End of Dial: 10 sec nOutg oing Seizure Resp onse: 5 sec nProg rammed Dial Pause: 1500 ms nFlash Leng th: 100 ms nTone: 350 ms nPause: 150 ms nInc oming Inc omplete Dial Alarm: 160 sec nOutg oing Dial Pulse Rate (PPS): 10 p p s nOutg oing Rotary Dig it Dial Make: 40 ms nOutg oing Rotary Dig it Dial Break: 60 ms nPPM : y e s nFreq uenc y: 16khz Digital Trunk Administration In Germany, the p ub lic network d oes not c ut throug h the voic e p ath to an inc oming B-c hannel until a CONNECT messag e is rec eived from the c alled p arty. This is true for the VN4, 1TR6, and E- DSS1 p rotoc ols. Thus, it is not ad visab le to route inc oming ISDN-PRI c alls from the German p ub lic network over non-ISDN trunks, b ec ause the c alling p arty will not hear any tones (ring b ac k, b usy, etc .) The b est that c an b e done is to have an attend ant or a vec tor hand le inc oming c alls that mig ht need to b e routed over a non-ISDN trunk. This sec tion d oes not list all p ossib le valid ad ministrab le c ombinations. Rather the most c ommon or stand ard c omb ination, c omp atib le with p ub lic -network and Typ e App roval stand ard s for eac h c ountry, is p resented : nTi e Tru n k s — Non-ISDN Sig naling Examp le (DS1 Ad ministration sc reen) nCirc uit Pac k: TN464E or later nBit Rate: 2.048 nInterfac e Comp anding : A-law nLine Cod ing: HDB3 nSignaling Mode: CAS nCountry Protocol: 13 nInterc onnec t: p b x
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 195 Germany nCRC?: no nId le Cod e: (ac c ep t the d efault) — ISDN-PRI Sig naling (Private Network - for a c onnec tion to another DEFINITY only) This examp le assumes use of AT&T Country Protoc ol with fac ility assoc iated sig naling . Other feature op tions will req uire c hang es in one or more ad ministered items. nDS1 Ad ministration sc reen nCirc uit Pac k: TN464E or later nBit Rate: 2.048 nInterfac e Comp anding : A-law nLine Cod ing: HDB3 nSignaling Mode: isdn-pri nConnec t: p b x nInterfac e: user (on one sid e and network on the other sid e) nCountry Protoc ol: 1 nProtoc ol Version: a nCRC: No nId le Cod e: (ac c ep t the d efault) — Sig naling Group sc reen nAssoc iated Sig naling : Yes nPrimary D_Channel: xxxx16 (xxxx= > dep end s on CP p hysical location) — Trunk Group Ad ministration sc reen nGroup Type: isdn-pri nCOR: COR for Tie trunks must have a lower FRL than the FRL of all CO/DID Trunk Group s and lower FRL than assig ned to eac h Route Pattern Preferenc es for all CO and DIOD trunk g roups. This is req uired sinc e German reg ulations p rohib it c onnec ting two CO trunks even through a p rivate network. nServic e Type: tie nSup p lementary Servic e Protoc ol: a nISDN-PRI (Private Network - for a c onnec tion to a non-DEFINITY via QSIG) Signaling This examp le assumes use of AT&T Country Protoc ol with fac ility assoc iated sig naling . Other feature op tions will req uire c hang es in one or more administered items.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 196 Germany — DS1 Ad ministration sc reen nCirc uit Pac k: TN464E or later nBit Rate: 2.048 nInterfac e Comp anding : A-law nLine Cod ing: HDB3 or AMI-BASIC d ep end ing on the ad ministration of the other PBX nSignaling Mode: isdn-pri nConnec t: p b x nInterfac e: p eer-master or p eer-slave (this affec ts layer 2; it should b e set based on the ad ministration of the other PBX) nPeer Protoc ol: ec ma Sid e: a or b (this affec ts g lare hand ling ; it should b e set b ased on the administration of the other PBX) nCountry Protoc ol: 1 nProtoc ol Version: a nCRC: No (yes is also p ossib le, d ep end ing on the ad ministration of the other PBX) nId le Cod e: (must matc h the id le c od e of the other PBX) — Sig naling Group sc reen nAssoc iated Sig naling : Yes nPrimary D_Channel: xxxx16 (xxxx= > dep end s on CP p hysical location) — Trunk Group Ad ministration sc reen nGroup Type: isdn-pri nCOR: COR for Tie trunks must have a lower FRL than the FRL of all CO/DID Trunk Group s and lower FRL than assig ned to eac h Route Pattern Preferenc es for all CO and DIOD trunk g roups. This is req uired sinc e German reg ulations p rohib it c onnec ting two CO trunks even through a p rivate network. nServic e Type: tie nSup p lementary Servic e Protoc ol: a nISDN-PRI (Public Network) Temporary Signaling Connec tions and D-Channel Backup features must not b e ad ministered for E1 interfac es that use c ountry p rotoc ol 13 (Germany).
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 197 Germany — DS1 Ad ministration sc reen nCirc uit Pac k: TN464E or later nBit Rate: 2.048 nInterfac e Comp anding : A-law nLine Cod ing: HDB3 nSignaling Mode: isdn-pri nConnec t: Network nCountry Protocol: 13 nProtoc ol Version: a, for 1TR6 and b , for E-DSS1. Protoc ol version selection depends on the type of public network servic e p urc hased b y the c ustomer nCRC: yes nId le Cod e: 01010100 — Sig naling Group sc reen nAssoc iated Sig naling : Yes nPrimary D_Channel: xxxx16 (xxxx= > dep end s on CP p hysical location) — Trunk Group Ad ministration sc reen nGroup Type: isdn-pri nCOR: COR for Tie trunks must have a lower FRL than the FRL of all CO/DID Trunk Group s and lower FRL than assig ned to eac h Route Pattern Preferenc es for all CO and DIOD trunk g roups. This is req uired sinc e German reg ulations p rohib it c onnec ting two CO trunks even through a p rivate network. nService Type: public_ntwrk nOverlap Rec eiving: yes, a must for DID trunk op eration Station Administration In g eneral, onc e the user defined lang uag e is ad ministered to c ontain the translations for German lang uag e, the ad ministrator selec ts user-d efined on station ad ministration and attend ant ad ministration to p ic k German as the d isp lay lang uag e for the c orrespond ing d isp lay set user. n85XX Phones In G3V3, the 8510 p hone must b e ad ministered as a 7507 when you use it for b oth voic e and d ata op eration. If you use it for voic e only op eration, a p hone typ e of 8510D is suffic ient. Aliasing a phone typ e of 8510+ to a 7507 is a p referable way of hand ling the situation. In G3V4, there is native sup p ort for the 8510/8520 voic e/d ata op eration and aliasing is not req uired .
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 198 Germany — Phone Setting s: nCountry Code = 9 nComp and ing Mode = a-law nTransmit Value = + 3 nReceive Value = -5 nSid e Tone Value = 0 n84XX(94XX) Phones Aliasing the p hone typ es of 9403B to 8403B, 9410B to 8410B, 9410D to 8410D, and 9434D to 8434D would b e a p referab le way of handling the ad ministration for the 94XX family of p hones. — Phone Parameters nDefault Parameter Set: 13 nCustomize Parameters? n NOTE: The d efault p arameters for selec ting Germany c ountry c od e 13 are as follows and SHOULD NOT BE A D M I N I STERED I N D I VI D U A L LY w i t h so f t w a re l o a d G3V3i.02.0.044.0 or later load s. These values are inc lud ed as referenc e information only. nDisp lay Mod e: 2 nDLI Voltag e Level: auto nHandset Exp and er Enab led ? n nPrimary Levels: — Voic e Transmit (d B): + 5.0 — Voic e Sid etone (d B): -12.0 — Voic e Rec eive (dB): -11.5 — Touc h Tone Sid etone (d B): -25.0 — Touc h Tone Transmit (d B): -4.0 nAd junc t Levels — Voic e Transmit (d B): -5.0 — Voic e Rec eive (dB): -2.0 — Voic e Sid etone (d B): -21.5 — Touc h Tone Sid etone (d B): -25.0 — Station Ad ministration (nothing exc ep t for alias of 94XX to 84XX eq uivalent)
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 199 Germany — VISTA Head set ad aptor setting s: nSwitc h: Position 5 nTx-p ot: 1 oc loc k nVolume-c ontrol on the Phone: Nominal — Valid Nord c om c omb inations: nProfile Monaural Head set < or> nProfile Binaural Head set < or> nStetomike HMT Head set n603/302B Phones — Phone Parameters nDefault Parameter Set: 13 nCustomize Parameters? n NOTE: The d efault p arameters for selec ting Germany c ountry c od e 13 are as follows and SHOULD NOT BE A D M I N I STERED I N D I VI D U A L LY w i t h so f t w a re l o a d G3V3i.02.0.044.0 or later load s. These values are inc lud ed as referenc e information only. nDisp lay Mod e: 2 nDLI Voltag e Level: auto nPrimary Levels: — Voic e Transmit (d B): + 1.5 — Voic e Sid etone (d B): -10.5 — Voic e Rec eive (dB): -7.5 — Touc h Tone Sid etone (d B): -25.0 — Touc h Tone Transmit (d B): -4.0 nVISTA Head set ad aptor setting s: — Switc h: Position 1 — Tx-pot: 3 oc loc k — Volume-c ontrol on the 603: Nominal nValid Nord c om c omb inations: — Profile Monaural Head set and Head set Amplifier 54
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 200 Germany — Profile Binaural Head set and Head set Amp lifier 54 — Stetomike HMT Head set Language The following are the c all p rog ress disp lay messag es and b utton lab els that are translated into German. The translation is a generic form of the lang uag e so that it provid es the wid est c ustomer b ase c overag e. The entity p rovid ing AT&T p resenc e in a c ountry is exp ec ted to p rovide eac h system with the following translations as a b ase user-defined set for systems sold within the corresp ond ing market. The following set of user-d efined translations ap p ly to Germany, Switzerland , and Austria. The user-d efined selec tion is an op tion for the end -user d isp lay that is ad ministered on the Station and Attend ant Ad ministration sc reens. For all p hone typ es that sup p ort the Disp lay Mod ule, exc ep t for 85XX p hones, set the Disp lay Lang uag e field to user-defined once the following administration is d one. On the 85XX p hone users sc reen, set the Disp lay Lang uage field to English to p rovid e a c onsistent lang uag e interfac e for users of those p hones (85XX p hones sup p ort only Eng lish p rog ram promp ts and fac ep lates). On the Console-Parameters sc reen, set the Attend ant Group Name field to Telefonist from the Eng lish d efault of OPERATOR . On the trunk g roup sc reen, set the Group Name field for eac h trunk to something other than the Eng lish d efault of OUTSIDE CALL . Automatic Wakeup Do Not Disturb nOBJECT: auto-wakeup-dn-dst — Eng lish: AUTO WAKEUP - Ext: Translation: Autom. Wec kruf - NSt: — Eng lish: WAKEUP ENTRY DENIED Translation: Wec kruf nic ht ang enommen — Eng lish: WAKEUP REQUEST CANCELED Translation: Wec kruf Eing ab e abg eb roc hen — Eng lish: WAKEUP REQUEST CONFIRMED Translation: Wec kruf Eing ab e b estaetig t — Eng lish: Wakeup Call Translation: Wec kruf —English: Time: Translation: Zeit: — Eng lish: DO NOT DIST - Ext: Translation: Nic ht stoeren - NSt:
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 201 Germany — Eng lish: DO NOT DIST - Group : Translation: Nic ht stoeren - Grupp e: — Eng lish: DO NOT DIST ENTRY DENIED Translation: Eingab e zuruec kg ewiesen — Eng lish: THANK YOU - DO NOT DIST ENTRY CONFIRMED Translation: Eingab e nic ht stoeren b estaetig t — Eng lish: THANK YOU - DO NOT DIST REQUEST CANCELED Translation: Eingab e nic ht stoeren abg ebroc hen nOBJECT: auto-wakeup-dn-dst — Eng lish: INTERVAL FULL Translation: W-Zeit belegt (Exp lanation: nur maximale Wec krufe zur g leic hen Zeit) — En g li s h : N O PERM I SSI O N Translation: K. Berec htig . — En g li s h : SYSTEM FU L L Translation: System voll — Eng lish: TOO SOON Translation: Zu frueh — Eng lish: INVALID EXTENSION - TRY AGAIN Translation: Falsc he NSt - Bitte wied erholen — Eng lish: INVALID GROUP - TRY AGAIN Translation: Falsc he Grup p e - Bitte wied erholen — Eng lish: WAKEUP MESSAGE: Translation: Wec kruf Nac hric ht: — Eng lish: INVALID NUMBER - TRY AGAIN Translation: Falsc he Nummer - Bitte wied erholen Call Identifiers nOBJECT: c all-id entifiers
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 202 Germany Table 30. English-German Call Identifiers English TermMeaning of English Term with German Expansion Translated Term sa ACD Sup ervisor Assistanc e ACD Hilfe vom Grupp enleiterGH ac Attend ant Assistanc e Call Gesp raeuc hsaufb au d urc h Tel efon is tenGT tc Attend ant Control Of A Trunk Group Amtsleitung s Kontrolle d urc h Tel efon is tenAK an Attend ant No Answer Keine AntwortkA p c Attend ant Personal Call Telefonisten-Gesp raec hTG rc Attend ant Rec all Call RR rt Attend ant Return Call Rueckruf vom TelefonistenRT sc Attend ant Serial Call Serien-Gesp raec h (Gepraec h wird nac h Beend ig ung jeweils zum Telefonisten zuruec kg eg eb en)SG c o Controlled Outward Res tr ic tio n Kontrollierte Amtswahlsp erreAS c s Controlled Station To Station Res tr ic tio n Kontrollierte Internsp erreIS c t Controlled Termination Res tr ic tio n Kontrollierte Emp fang ssp erreES Continued on next page