Lucent Technologies CentreVu Visual Vectors Version 8.0 Guide

							   CentreVu® Visual Vectors Version 8.0
Installation and Getting Started
Installation Procedures4-3
Installing CentreVu Visual Vectors on 
a PC from a Network folder 
4. Using the Copy command or drag-and-drop, copy the contents of 
the CD-ROM to the folder you created in step 3. Be sure to copy all 
of the files.
5. Verify that the network drive where you copied the contents of the 
distribution medium is connected to each computer that wi1l be 
installing Framework from the network.
6.Go to “Setting Up the Computer.”
Setting Up the Computer4
To install CentreVu Visual Vectors software from the network drive, sit 
down at the PC onto which you want to install CentreVu Vi s u a l  Ve c t o r s  
and do the following:
NOTE:
Before starting the installation, close all running programs on the 
computer.
1. Click S
tart on the taskbar and select Run. The Run dialog box 
appears.
2. In the O
pen text box, enter the network drive on which the setup 
program was copied, followed by the full path to the setup.exe 
file. 
						

							   CentreVu® Visual Vectors Version 8.0
Installation and Getting Started
Installation Procedures4-4
Installing CentreVu Visual Vectors on 
a PC from a Network folder 
3. Select OK.
In the following example, the “X:” drive is selected. If you are not 
sure of the location of the software, continue with Step 4. If you are 
sure of the location, select OK and go to step 7.
4. In the Run dialog box, select the B
rowse button. The browse dialog 
box appears.
5. In the Browse dialog box, navigate to the drive and directory 
containing the CentreVuVisual Vectors files. Make sure the 
computer is connected to the drive. 
						

							   CentreVu® Visual Vectors Version 8.0
Installation and Getting Started
Installation Procedures4-5
Installing CentreVu Visual Vectors on 
a PC from a Network folder 
6. Locate and double-click on the setup.EXE file to begin the 
installation.
After a short wait, the CentreVu Visual Vectors Installation Ty p e  o f  
Install window appears.
7. In the Type of Install window, click on the radio button labeled Local. 
Visual Vectors supports both local and network installations. To 
perform a network installation, refer to chapter 3. 
						

							   CentreVu® Visual Vectors Version 8.0
Installation and Getting Started
Installation Procedures4-6
Installing CentreVu Visual Vectors on 
a PC from a Network folder 
8. Select Install.
NOTE:
If MS Internet Explorer, version 3.02 or higher, is not installed on 
your PC, the following warning window appears:
a. In this case, select OK and CentreVu Visual Vector Install closes.
b. Install MS Internet Explorer, version 3.02 or higher, on your PC 
and begin this installation procedure again. 
						

							   CentreVu® Visual Vectors Version 8.0
Installation and Getting Started
Installation Procedures4-7
Installing CentreVu Visual Vectors on 
a PC from a Network folder 
After a short wait, the CentreVu Visual Vectors Installation Welcome 
window appears. 
						

							   CentreVu® Visual Vectors Version 8.0
Installation and Getting Started
Installation Procedures4-8
Installing CentreVu Visual Vectors on 
a PC from a Network folder 
9. Select Next. 
NOTE:
There are cases where no previous version of Visual Vectors exists, 
where Visual Vectors 1.0 exists, and where multiple versions of 
Visual Vectors are detected. These scenarios display different 
screens. If a previous version of CentreVu Visual Vectors is installed 
on the *network*, not on your PC (because this is a network 
installation), the following window appears.:
lIf you want to install the latest version of CentreVu Visual Vectors 
over the existing version, click on the radio button labeled Upgrade, 
select Next and go to step 16.
lIf you want to install the latest version of CentreVu Visual Vectors in 
another folder, click on the radio button labeled Add and select 
Next. 
						

							   CentreVu® Visual Vectors Version 8.0
Installation and Getting Started
Installation Procedures4-9
Installing CentreVu Visual Vectors on 
a PC from a Network folder 
The Select Location dialog box appears. 
						

							   CentreVu® Visual Vectors Version 8.0
Installation and Getting Started
Installation Procedures4-10
Installing CentreVu Visual Vectors on 
a PC from a Network folder 
10. Choose one of the following:
lIf you want to install the Visual Vectors files in the default 
installation path displayed, go to Step 14. 
lIf you want to install the CentreVuVisual Vectors files in a 
different drive or folder, go to Step 11.
11. Use the B
rowse option to display the Select Destination Folder 
dialog box.
12. In the Select Destination Folder dialog box, do one of the following:
lNavigate to the drive and folder where you want to install the 
files. Double click on the folder to select it.
lType the drive and folder where you want to install the files. If 
the folder does not exist, the Setup program creates it.
13. Click OK.  
						

							   CentreVu® Visual Vectors Version 8.0
Installation and Getting Started
Installation Procedures4-11
Installing CentreVu Visual Vectors on 
a PC from a Network folder 
14. Select Next. 
The Select Folder dialog box appears.
15. The Select Folder dialog box lets you select a folder in which to put 
CentreVu Visual Vectors shortcuts. Do one of the following:
lIf you want to put the shortcut in the folder indicated in the text 
box, go to step16.
lIf you want to put the CentreVu Visual Vectors shortcuts in a 
folder other than the one in the text box on this page, enter a 
different folder name in the text box. (If you enter a name that 
does not exist, setup creates a folder with that name.) 
						

							   CentreVu® Visual Vectors Version 8.0
Installation and Getting Started
Installation Procedures4-12
Installing CentreVu Visual Vectors on 
a PC from a Network folder 
16. Select Next.
The Ready to Install dialog box appears.