Lucent Technologies Centrevu Supervisor Version 8 Guide

   CentreVu Supervisor Version 8 Installation and Getting Started
Installing and Using CentreVu Terminal Emulator
Using Terminal8-17
Setting Profile Options8
Use Options from the Connection menu to set up how you will connect to the 
CMS host computer. The following paragraphs describe the options available to 
you and give you illustrations of settings for standard Terminal profiles.
When you are working in any of the windows, the following conventions are 
used:
lClick OK to set your current settings...

   CentreVu Supervisor Version 8 Installation and Getting Started
Installing and Using CentreVu Terminal Emulator
Using Terminal8-18
Communications Tab8
Select the Communications tab to display the window that lets you set up or 
change the options for connecting to a remote host computer.
Select N
etwork, Serial, or Modem from the Connection box. Below are 
explanations and examples of the settings required for each type of connection.
Network Connection Settings
8
Select Network if you are connecting...

   CentreVu Supervisor Version 8 Installation and Getting Started
Installing and Using CentreVu Terminal Emulator
Using Terminal8-19
Serial and Modem Connection Settings8
Select Serial if you are connecting to the remote CMS through a serial 
connection, M
odem if you are connecting to the remote CMS through a 
modem. An example of standard settings for a serial or modem connection 
is shown below:
Enter the following required information for this setting:
lPort—choose from the pull-down list the...

   CentreVu Supervisor Version 8 Installation and Getting Started
Installing and Using CentreVu Terminal Emulator
Using Terminal8-20
lData Bit—choose the number of data bits from the pull-down list. 
The options are 5, 6, 7, and 8.
lStop Bits—displays the number of stop bits from the pull-down list. 
The options are 1, 1.5, and 2.
NOTE:
Do not change these settings unless you are instructed to do so by your 
Network Administrator.
Modem Tab8
Select the Modem tab to set up or change dial strings for...

   CentreVu Supervisor Version 8 Installation and Getting Started
Installing and Using CentreVu Terminal Emulator
Using Terminal8-21
lDial Suffix—enter the characters to send to the modem after the Phone 
Number of the remote host. For example, if an extension has to be dialed 
after the telephone number of the remote host, enter it here.
lHangup String—enter the characters to send to the modem to cause it to 
hang up the connection. The default is ATH.
lReset String—enter the characters to send to the...

   CentreVu Supervisor Version 8 Installation and Getting Started
Installing and Using CentreVu Terminal Emulator
Using Terminal8-22
Use the following information to set the font size: 
lSmall font is approximately 8 points and is appropriate for video displays 
that have a resolution of 640 x 480 (VGA) or less.
lMedium font is approximately 9 points and is appropriate for video 
displays that have a resolution of 800 x 600 or 1024 x 768. Medium is the 
default font size.
lLarge font is approximately 10...

   CentreVu Supervisor Version 8 Installation and Getting Started
Installing and Using CentreVu Terminal Emulator
Terminal Messages8-23
Terminal Messages8
There are two types of messages you can receive when using Terminal:
lError Messages
lInformation Messages.
Error Messages8
The following messages are displayed in a window with an OK button:
Unable to connect to the remote host.8
Terminal failed to connect to the remote host. If the reason for failure can be 
determined, Terminal displays one of the...

   CentreVu Supervisor Version 8 Installation and Getting Started
Installing and Using CentreVu Terminal Emulator
Terminal Messages8-24
Information Messages8
The following messages are displayed in a box with Ye s and No buttons:
The profile {name} exists, replace?8
This message appears if you try to save a profile named {name} and it already 
exists.
Save changes to {name}?8
This message appears if you try to exit the Terminal without saving changes to 
the profile named {name}.
A connection is active,...

   CentreVu Supervisor Version 8 Installation and Getting Started
Troubleshooting
Overview9-1
CentreVu
Supervisor
Troubleshooting9
Overview9
If you are having trouble with any of the procedures mentioned in this 
document, please read through this section before calling the National 
Customer Care Center. The problem may be something simple that you can 
quickly solve yourself.
If you have not solved the problem after reading through this section, contact 
the National Customer Care Center at...

   CentreVu Supervisor Version 8 Installation and Getting Started
Troubleshooting
Troubleshooting Tips9-2
Troubleshooting Tips9
This section will help you with problems you may encounter when installing 
CentreVu® Supervisor, logging into CentreVu Supervisor, or running CentreVu 
Supervisor. It contains the following tables which describe error messages that 
may appear in Supervisor:
Installation Error Messages9
Use the following information to help you with error messages encountered 
while installing...