Lexmark X544 Manual

Menu itemDescription
Sides (Duplex)
2 sided
1 sidedEnables duplex (two-sided) printing
Note: 1 sided is the factory default setting.
Print Settings
Setup menu
Menu itemDescription
Printer Language
PS Emulation
PCL Emulation
PPDS EmulationDetermines which printer language the print server uses to send data to the
printer
Note: PS is the factory default setting.
Print Area
Normal
Fit to Page
Whole PageDetermines the print area on paper
Note: Normal is the factory default setting.
Download Target
RAM...

Menu itemDescription
Copies
1–999Specifies a default number of copies for each print job
Note: 1 is the factory default setting.
Blank Pages
Do Not Print
PrintSpecifies whether blank pages are inserted in a print job
Note: “Do Not Print” is the factory default setting.
Collate
On
OffStacks the pages of a print job in sequence when printing multiple copies
Notes:
Off is the factory default setting. No pages will be collated.
The On setting stacks the print job sequentially.
Both settings print the entire...

Menu itemDescription
Orientation
Auto
Landscape
PortraitSpecifies the orientation of a multiple‑page sheet
Notes:
Auto is the factory default setting. The printer chooses between portrait and
landscape.
Long Edge uses landscape.
Short Edge uses portrait.
N‑Up Border
None
SolidPrints a border around each page image
Note: None is the factory default setting.
Quality menu
Menu itemDescription
Color Correction
Auto
Off
ManualAdjusts the color output on the printed page
Notes:
Auto is the factory default...

Menu itemDescription
RGB Brightness
‑6 to +6Adjusts brightness in color outputs
Notes:
0 is the factory default setting.
This menu item does not affect files that use CMYK color specifications.
RGB Contrast
0–5Adjusts contrast in color outputs
Notes:
0 is the factory default setting.
This menu item does not affect files that use CMYK color specifications.
RGB Saturation
0–5Adjusts saturation in color outputs
Notes:
0 is the factory default setting.
This menu item does not affect files that use CMYK color...

Menu itemDescription
Manual Color (RGB)
RGB Image
RGB Text
RGB GraphicsCustomizes the RGB color conversions. The values for each setting are:
Vivid
sRGB Display
Display—True Black
sRGB Vivid
Off
Notes:
Vivid applies a color conversion table that produces brighter, more saturated
colors.
sRGB Display is the factory default setting for RGB Image. This applies a color
conversion table to an output that matches the colors displayed on a computer
monitor.
Display—True Black applies a color conversion table...

Menu itemDescription
Coverage Estimator
Off
OnProvides an estimate of the percentage coverage of cyan, magenta, yellow, and black
on a page. The estimate is printed on a separator page.
Notes:
Off is the factory default setting.
This menu item is not available on selected printer models.
PDF menu
Menu itemDescription
Scale to Fit
No
YesScales page content to fit the selected page size
Note: No is the factory default setting.
Annotations
Do Not Print
PrintSpecifies whether to print annotations in the PDF...

Menu itemDescription
Font Name
RO CourierIdentifies a specific font and the option where it is stored
Notes:
RO Courier is the factory default setting.
RO Courier shows the font name, font ID, and storage location in the
printer. The font source abbreviation is R for Resident, F for Flash, and D
for Download.
Symbol Set
10U PC‑8
12U PC‑850Specifies the symbol set for each font name
Notes:
10U PC‑8 is the US factory default setting.
12U PC‑850 is the international factory default setting.
A symbol set is...

Menu itemDescription
PCL Emulation Settings
A4 Width
198 mm
203 mmSets the printer to print on A4‑size paper
Notes:
198 mm is the factory default setting.
The 203‑mm setting sets the width of the page to allow the printing of
eighty 10‑pitch characters.
PCL Emulation Settings
Auto CR after LF
On
OffSpecifies whether the printer automatically performs a carriage return (CR) after
a line feed (LF) control command
Notes:
Off is the factory default setting.
Setting alterations are duplicated in the PPDS...

Image menu
Menu itemDescription
Auto Fit
On
OffSelects the optimal paper size, scaling, and orientation
Notes:
On is the factory default setting.
The On setting overrides scaling and orientation settings for some images.
Invert
On
OffInverts bi‑tonal monochrome images
Notes:
Off is the factory default setting.
The font size can be increased in 1‑point increments.
This setting does not apply to GIF or JPEG images.
Scaling
Anchor Top Left
Best Fit
Anchor Center
Fit Height/Width
Fit Height
Fit WidthScales...

Menu itemDescription
Layout
Auto
Off
2 Up
3 Up
4 Up
6 Up
9 Up
12 Up
16 Up
Index PrintDetermines the maximum number of images that can print on one side of paper
Notes:
Auto is the factory default setting.
If both the printer and the PictBridge‑enabled camera have a value for this
setting, the value in the camera supersedes the value in the printer.
Quality
Normal
Draft
FineDetermines which resolution, toner darkness, and color saver values the device uses
when printing photos sent from a...