Lexmark X544 Manual

35 Insufficient memory to support Resource Save feature
The printer lacks sufficient memory to save settings. Install additional memory, or press  to disable Resource Save
and continue printing.
37 Insufficient memory to collate job
The printer prints the pages that were spooled prior to the collation message and collates the remainder of the print
job.
Try one or more of the following:
Press  to clear the message and continue printing.
Press , and then press  to cancel printing.
38 Memory Full
The...

52 Not enough free space in flash memory for resources
Try one or more of the following:
Press  to clear the message and continue printing.
Delete fonts, macros, and other data stored in flash memory.
Upgrade to a larger capacity flash memory.
Press , and then press  to cancel printing.
53 Unformatted flash detected
Try one or more of the following:
Press  to clear the message and continue printing.
Format the flash memory. If the message remains, the flash memory may be defective and require replacing....

58 Too many trays attached
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Remove the additional trays.
4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
58 Input config error
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Remove and re‑configure the additional trays.
Note: If you installed both the optional 550‑sheet tray and the 650‑sheet duo drawer, then the optional
550‑sheet tray must be installed as the first tray...

150 displayed
The USB drive contains more than 150 files; only 150 files will be displayed.
200.yy Paper jam 
1Clear the paper path.
2Press  to clear the message and continue printing.
201.yy Paper jam 
1Clear the paper path.
2Remove the jammed paper below the fuser.
3Press  to clear the message and continue printing.
202.yy Paper jam 
1Clear the paper path.
2Remove the jammed paper from the fuser.
3Press  to clear the message and continue printing.
230.yy Paper jam 
1Clear the paper path.
2Open the...

24x Paper Jam Check Tray 
1Pull the tray out.
2Remove the jammed paper.
3Insert the tray.
If all jams are cleared, the printer resumes printing.
Note: When there is more than one jam, the message indicates the number of pages jammed.
250.yy Paper jam 
1Clear the paper path.
2Open the front door, and then remove the jammed paper.
3Hold the fuser cover down, and then remove the jammed paper from inside the fuser.
4Close the fuser cover, and then close the front door.
5Press  to clear the message and...

294 ADF Jam
This jam location may also be identified as 294.04 Duplex Sensor Off Jam, 294.05 Scan Sensor Off
Jam, or 294.06 ADF Backfeed Jam. To clear this jam:
1Remove all pages from the ADF.
Note: The message clears when the pages are removed from the ADF.
2Flex and fan the pages.
3Place the pages in the ADF.
4Adjust the ADF guides.
5From the printer control panel, press  to start a black only job or  to start a color job.
840.01 Scanner Disabled
This message indicates that the scanner has been...

943.01
Press down on the black toner cartridge to make sure it is installed properly. Turn the printer off, wait about 10 seconds,
and then turn the printer back on
940.02
The cyan toner cartridge needs maintenance. Call for service.
941.02
The magenta toner cartridge needs maintenance. Call for service.
942.02
The yellow toner cartridge needs maintenance. Call for service.
943.02
The black toner cartridge needs maintenance. Call for service.
900–999 Service 
1Turn the printer off.
2Unplug the power cord...

Maintaining the printer
Periodically, certain tasks are required to maintain optimum print quality.
Storing supplies
Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you
are ready to use them.
Do not expose supplies to:
Direct sunlight
Temperatures above 35°C (95°F)
High humidity above 80%
Salty air
Corrosive gases
Heavy dust
Checking the status of supplies
A message appears on the display when a replacement supply item is needed or...

Ordering supplies
To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies
dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place
where you purchased the printer.
Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper.
Ordering toner cartridges
When 88 Cyan Cartridge Low, 88 Magenta Cartridge Low, 88 Yellow Cartridge Low, or 88
Black Cartridge...

Part namePart numberC540, C543, and X543 seriesC544, X544, and X546 series
Magenta Extra High Yield
Return Program Toner
CartridgeC544X1MG Not supported
Yellow Extra High Yield
Return Program Toner
CartridgeC544X1YG Not supported
Black Extra High Yield Toner
CartridgeC544X2KG Not supported
Cyan Extra High Yield Toner
CartridgeC544X2CG Not supported
Magenta Extra High Yield
Toner CartridgeC544X2MG Not supported
Yellow Extra High Yield Toner
CartridgeC544X2YG Not supported
Black Extra High Yield Return...