Lexmark X544 Manual

8Remove the used developer unit.
9Place the used developer in the enclosed package.
10Unpack the replacement developer unit.
Leave the packaging on the developer unit.
11Gently shake the developer unit side to side.
12Remove the red shipping cover from the developer unit.
13Insert the developer unit.
Maintaining the printer201 

14Align and insert the imaging kit.
15Replace the waste toner bottle.
Maintaining the printer202 

16Replace the right side cover.
17Replace the toner cartridges.
18Close the top door.
KMCYYCM
K
Maintaining the printer203 

19Close the front door.
3DEF6MNO9WXYZ#2ABC5JKL8TUV01@!.GHI4PQRS7*
Cleaning the exterior of the printer
1Make sure that the printer is turned off and unplugged from the wall outlet.
CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer,
unplug the power cord from the wall outlet and disconnect all cables from the printer before proceeding.
2Remove paper from the standard exit tray.
3Dampen a clean, lint‑free cloth with water.
Warning—Potential Damage: Do not...

Cleaning the scanner glass
Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images.
Note:  Clean both areas of the scanner glass and both white underside areas.
1Slightly dampen a soft, lint-free cloth or paper towel with water.
2Open the scanner cover.
1
2
3 4
1White underside ADF cover
2White underside scanner glass cover
3Scanner glass
4ADF glass
3Wipe the scanner glass until it is clean and dry.
4Wipe the white underside of the scanner cover until...

Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the same
time.
Note: Use the handholds located on both sides of the printer to lift it off the optional drawer.
Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer
warranty.
Moving the printer to another location
The printer and options can be safely moved to another location by following these precautions:
Any cart used to move the printer...

Administrative support
Finding advanced networking and administrator information
This chapter covers basic administrative support tasks. For more advanced system support tasks, see the Networking
Guide on the Software and Documentation CD and the Embedded Web Server Administrators Guide on the Lexmark
Web site at www.lexmark.com.
Restoring the factory default settings
Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original printer settings,
often referred to...

To access the Embedded Web Server:
1Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2Click one of the tabs to access information about the printer, change settings, or view a report.
Note: If the printer is connected to a...

Troubleshooting
Solving basic printer problems
If there are basic printer problems, or the printer is unresponsive, make sure:
The power cord is plugged into the printer and a properly grounded electrical outlet.
The electrical outlet is not turned off by any switch or breaker.
The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.
Other electronic equipment plugged into the outlet is working.
The printer is turned on. Check the printer power switch.
The...

Jobs do not print
These are possible solutions. Try one or more of the following:
MAKE SURE THE PRINTER IS READY TO PRINT
Make sure Ready or Power Saver appears on the display before sending a job to print. Press  to return the
printer to the Ready state.
CHECK TO SEE IF THE STANDARD EXIT BIN IS FULL
Remove the stack of paper from the standard exit bin, and then press .
CHECK TO SEE IF THE PAPER TRAY IS EMPTY
Load paper in the tray.
MAKE SURE THE PRINTER IS CONNECTED TO THE NETWORK
Print a network setup...