Lexmark X4650 User Manual

In Windows 2000
a
Click Start.
bClick Settings  Printers.
2Right-click the printer name, and then select Open.
3Do one of the following:
If you want to cancel a particular print job, right-click the document name, and then select Cancel.
If you want to cancel all print jobs in the queue, click Printer  Cancel All Documents.
Using the taskbar in Windows
1Double-click the printer icon in the taskbar.
2Do one of the following:
If you want to cancel a particular print job, right-click the document name,...

Working with photos
You can also use the programs that are installed with the printer software to customize and print photos. For more
information, see the Help associated with these programs.
Inserting a memory card
1Insert a memory card.
Insert the card with the brand name label facing up.
If there is an arrow on the card, make sure it points toward the printer.
If needed, make sure you connect the memory card to the adapter that came with it before inserting it into
the slot.
12
SlotMemory card...

2Wait for the light located near the top memory card slot on the printer to come on. The light blinks to indicate
the memory card is being read or is transmitting data.
Warning—Potential Damage: Do not touch cables, any network adapter, any connector, the memory card, or
the printer in the area shown while actively printing, reading, or writing from the memory card. A loss of data
can occur. Also, do not remove the memory card while actively printing, reading, or writing from it.
When the printer detects...

Note: The printer recognizes one active media device at a time. If you insert more than one media device, a message
appears on the display prompting you to designate the device you want the printer to recognize.
Retrieving and managing photos
Transferring photos from a memory device to the computer
Using the printer control panel
Notes:
You cannot transfer photos from a memory device to a computer through an external network adapter that does
not support memory device connection.
The printer may require...

cOn the computer screen, select an option to save photos to the computer.
dFollow the instructions on the computer screen.
Using Lexmark Productivity Studio in Windows
If you installed Lexmark Productivity Studio, and if the printer is connected to the computer through a USB cable,
then the program launches when you insert the memory device. Follow the instructions on the computer screen
to transfer photos.
If the printer is connected to the computer through a network:
1Do one of the following:
–In...

Transferring photos from a memory card to a flash drive
1Insert a memory card into the printer.
2After the memory card is detected, press the arrow buttons until Save Photos appears.
3Insert the flash drive into the printer, and then press the arrow buttons until USB Flash Drive appears.
4Use the arrow buttons to select a save option. You can transfer all the photos, the most recent photo, or photos
within a date range. Press 
 when you make a selection.
5Follow the instructions on the printer control...

6Do one of the following:
If you are in the Easy Photo menu, use the arrow buttons to select the paper size and photo size. Press
 each time you make a selection.
If you are in the Print Photos menu, use the arrow buttons to select the photo size, paper size, paper
type, layout, and quality of the photos, and to adjust the brightness and color effects of the photos. Press
 each time you make a selection.
7Press .
Note: To prevent smudging or scratching, avoid touching the printed surface with your...

3From the print options pop-up menu, choose Quality & Media.
From the Paper Type pop-up menu, choose a paper type.
From the Print Quality menu, choose Automatic or Photo.
4Click Print.
Note: Manually choosing a paper type, even if you have a paper type sensor, turns off the sensor for the current
print job.
Printing photos from a memory device using the printer software
1Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,
then see the...

If the printer is connected to the computer through a network, then the Lexmark Network Card Reader
launches on the computer.
Transfer the photos to the computer using the application, and then use the applications installed on the
computer to print the photos.
For more information on transferring photos using the Lexmark Network Card Reader, see the Help associated
with the application.
Applying color effects to photos using the printer control panel
You can use the printer control panel to apply color...

Printing photos from a PictBridge-enabled digital camera
PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera
without using a computer. You can connect a PictBridge-enabled digital camera to the printer, and use the camera
to control printing photos.
1Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the camera.
2Insert the other end of the cable into the PictBridge port on the front of the printer....