Lexmark X4650 User Manual

MOVE YOUR PRINTER
Move the printer closer to the wireless access point. Although the possible distance between devices in 802.11b
or 802.11g networks is 300 feet, the effective range for optimal performance is generally 100–150 feet.
You can find the signal strength of the network on the network setup page.
CHECK SECURITY KEYS
If you are using WEP security
A valid WEP key is:
Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.
or
Exactly 5 or 13 ASCII characters. ASCII...

eClick TCP/IP.
The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100.
The "Router" entry is typically the wireless access point.
In Mac OS X version 10.4 and earlier
a
Click   System Preferences.
bClick Network.
cIf necessary, select Network Status in the Show pop-up menu.
The AirPort status indicator should be green. Green means the port is active (turned on) and connected.
Notes:
Yellow means the port is active but is not connected.
Red means the port has...

The printer may be unable to join the network because of interference, its distance from the wireless access point
(wireless router), or until its settings are changed.
These are possible solutions. Try one or more of the following:
CHECK NETWORK NAME
Make sure your network does not have the same name as another network near you. For example, if you and your
neighbor both use a manufacturer's default network name, your printer could be connecting to your neighbor's
network.
If you are not using a...

Wireless print server not installed
You may see a message during installation indicating that the printer does not have a wireless print server installed.
If you are sure the printer is capable of wireless printing, try the following:
CHECK POWER
Make sure the  light is on.
“Communication not available” message displays when printing
wirelessly
If you are using a laptop and have power saving settings enabled, you may see the Communication not
available message on your computer screen when you attempt to...

3Press the arrow buttons until Reset Network Adapter Defaults appears, and then press .
4Press the arrow buttons until Yes appears, and then press .
The internal wireless print server is reset to factory default settings. To verify, print a network setup page.
Troubleshooting
125
Downloaded From ManualsPrinter.com Manuals 

Notices
Product information
Product name:
Lexmark 3600 Series
Machine type:
4438
Model(s):
001, 002
Product name:
Lexmark 4600 Series
Machine type:
4438
Model number 2:
W02, W03, WE2, WE3
Edition notice
November 2008
The following paragraph does not apply to any country where such provisions are inconsistent with local
law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF...

If you don't have access to the Internet, you can contact Lexmark by mail:
Lexmark International, Inc.
Bldg 004-2/CSC
740 New Circle Road NW
Lexington, KY 40550
USA
© 2008 Lexmark International, Inc.
All rights reserved.
UNITED STATES GOVERNMENT RIGHTS
This software and any accompanying documentation provided under this agreement are commercial computer
software and documentation developed exclusively at private expense.
Trademarks
Lexmark and Lexmark with diamond design are trademarks of Lexmark...

The manufacturer is not responsible for radio or television interference caused by using other than recommended
cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could
void the user's authority to operate this equipment.
Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device,
use a properly shielded and grounded cable such as Lexmark part number 1021294 for USB attach. Use of a...

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit
RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health
Canada's Web site www.hc-sc.gc.ca/rpb.
The term "IC:" before the certification/registration number only signifies that the Industry Canada technical
specifications were met.
Industry Canada (Canada)
Cet appareil est conforme à la norme RSS-210 d'Industry...

Compliance is indicated by the CE marking.
The Alert sign indicates that there are restrictions within certain member states.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA.
The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium
Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available
upon request from the Authorized...