Lexmark X4650 User Manual

3Dampen a clean, lint-free cloth with water.
Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of
the printer.
4Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper
exit tray.
Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer.
5Make sure the paper support and paper exit tray are dry before beginning a new print job.
Ordering supplies
Ordering print...

Ordering paper and other supplies
To purchase supplies or to locate a dealer near you, visit our Web site at www.lexmark.com.
For best results when printing photos or other high-quality images, use Lexmark Photo Paper or Lexmark PerfectFinish
Photo Paper and Lexmark print cartridges.
ItemDescription
Lexmark Photo PaperLetter
A4
4 x 6 in.
10 x 15 cm
Lexmark PerfectFinish Photo PaperLetter
A4
4 x 6 in.
10 x 15 cm
L
USB cablePart number 1021294
Resetting to factory settings
Resetting all settings
You can...

Troubleshooting
Using the printer troubleshooting software
(Windows only)
The Lexmark Service Center provides step-by-step troubleshooting help and contains links to printer maintenance
tasks and customer support.
To open the Lexmark Service Center, use one of these methods:
Method 1Method 2
If it appears on an error message dialog, click the For
additional assistance, use the Lexmark Service
Center link.1Do one of the following:
In Windows Vista, click .
In Windows XP and earlier, click Start.
2Click...

Power button is not lit
These are possible solutions. Try one or more of the following:
PRESS POWER BUTTON
Make sure the printer is on by pressing  .
DISCONNECT AND RECONNECT THE POWER CORD
1Disconnect the power cord from the wall outlet, and then from the printer.
2Plug the cord all the way into the power supply on the printer.
1
2
3Plug the cord into an electrical outlet that other electrical devices have been using.
4If the  light is not on, press .
Software did not install
If you encountered problems...

RECONNECT THE POWER SUPPLY
1Press  to turn the printer off.
2Disconnect the power cord from the wall outlet.
3Gently remove the power supply from the printer.
4Reconnect the power supply to the printer.
5Plug the power cord into the wall outlet.
6Press  to turn the printer on.
TEMPORARILY DISABLE SECURITY PROGRAMS IN WINDOWS
1Close all open programs.
2Disable any security programs.
3Do one of the following:
In Windows Vista, click .
In Windows XP and earlier, click Start.
4Click Computer or My Computer....

CHECK CARTRIDGES
1Remove the print cartridges.
2Make sure the sticker and tape have been removed.
12
12
3Reinsert the cartridges.
CHECK PRINTER DEFAULT AND PAUSE SETTINGS
Using Windows
1
Do one of the following:
In Windows Vista
aClick .
bClick Control Panel.
cUnder Hardware and Sound, click Printer.
In Windows XP
aClick Start.
bClick Printers and Faxes.
In Windows 2000
aClick Start.
bClick Settings  Printers.
2Double-click the printer.
3Click Printer.
Make sure no check mark appears next to Pause...

Using Macintosh
For Mac OS X version 10.5
1From the Finder desktop, click   System Preferences  Print & Fax.
2From the Default Printer pop-up menu, check if the printer is the default printer.
If the printer is not the default printer, then you must select the printer for each file that you want to print.
If you want to set the printer as the default printer, then select the printer from the Default Printer pop-up
menu.
3Click Open Print Queue.
The print queue dialog appears.
Make sure that the print...

REMOVE AND REINSTALL THE SOFTWARE
If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer
option when sending a print job, then try uninstalling and reinstalling the software.
Solving printer power problems
The printer and the computer cannot exchange data.
These are possible solutions. Try one or more of the following:
MAKE SURE THE PRINTER POWER SUPPLY IS ATTACHED CORRECTLY
1Press  to turn the printer off.
2Disconnect the power cord from...

If the install screen does not appear automatically after you restart your computer, do one of the following:
In Windows Vista
a
Click .
bIn the Start Search box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
In Windows XP and earlier
a
Click Start.
bClick Run.
cType D:\setup.exe, where D is the letter of your CD or DVD drive.
Using Macintosh
1Close all open software applications.
2From the Finder desktop, double-click the printer folder.
3Double-click the Uninstaller icon.
4Follow...

cFrom the Hardware tab, click Device Manager.
In Windows 2000
aClick Start.
bClick Settings  Control Panel  System.
cFrom the Hardware tab, click Device Manager.
2Click the plus sign (+) beside Universal Serial Bus Controller.
If USB Host Controller and USB Root Hub are listed, then the USB port is enabled.
For more information, see the computer documentation.
Wireless troubleshooting
Wireless troubleshooting checklist
Before beginning to troubleshoot the wireless printer, verify the following:
•The...