Lexmark X4650 User Manual

How do I find the MAC address?
Most network equipment has a unique hardware identification number to distinguish it from other devices on the
network. This is called the Media Access Control (MAC) address.
The MAC address is a series of letters and numbers located on the back of your printer.
UAA: XX   XX   XX   XX   XX   XX
UA
A
:X
X
 
  X
X
 
  
X
X
  
 X
X
   
X
X
   
X
X
Note: A list of MAC addresses can be set on an access point (router) so that only devices with matching MAC addresses
are allowed...

How do I locate IP addresses?
How to locate a computer IP address using Windows
1Do one of the following:
In Windows Vista
a
Click .
bClick All Programs  Accessories.
cClick Command Prompt.
In Windows XP and earlier
a
Click Start.
bClick All Programs or Programs  Accessories  Command Prompt.
2Type ipconfig.
3Press Enter.
The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100.
How to locate a computer IP address using Macintosh
1Click  System Preferences.
2Click...

What is a key index?
A wireless access point (wireless router) can be configured with as many as four WEP keys. Only one key is used on
the network at a time, however. The keys are numbered, and the number of a key is referred to as its key index. All
devices on the wireless network must be configured to use the same key index when multiple WEP keys are configured
on the wireless access point (wireless router).
The printer is designed to use the first key. Make sure you have configured all of the...

Loading paper
Loading paper
1Make sure:
You use paper designed for inkjet printers.
If you are using photo, glossy, or heavyweight matte paper, you load it with the glossy or printable side facing
you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)
The paper is not used or damaged.
If you are using specialty paper, you follow the instructions that came with it.
You do not force paper into the printer.
2Before loading paper the first time, slide the...

The paper guides rest against the edges of the paper.
Note: P ho tos  re q ui re  m ore  d r yi ng  tim e .  R e m ove  e a ch  p ho to as  it  e x it s,  an d  th e n al low  it  t o d ry  to  a void  in k  s mu d gi ng .
Envelopes
You can load up to 10 envelopes.
1
Make sure:
The print side of the envelopes faces you.
The stamp location is in the upper left corner.
The envelopes are designed for use with inkjet printers.
The envelopes are loaded in the center of the paper support.
The paper guides rest...

Make sure:
The rough side of the transparencies faces you.
If the transparencies have a removable strip, each strip faces away from you and down toward the printer.
The transparencies are loaded in the center of the paper support.
The paper guides rest against the edges of the transparencies.
Notes:
Transparencies with paper backing sheets are not recommended.
Transparencies require more drying time. Remove each transparency as it exits, and then allow it to dry to avoid
ink smudging.
Iron-on transfers...

Width:
–76.2–215.9 mm
–3.0–8.5 inches
Length:
–127.0–355.6 mm
–5.0–17.0 inches
The paper is loaded in the center of the paper support.
The paper guides rest against the edges of the paper.
Banner paper
You can load up to 20 sheets.
WFI IP
RINTING
Make sure:
You remove all the paper from the paper support before loading the banner paper.
You tear off only the number of pages needed to print the banner.
You place the required stack of banner paper on a flat surface behind the printer.
The leading edge of...

Loading original documents on the scanner glass
You can scan and then print photos, text documents, magazine articles, newspapers, and other publications. You
can scan a document for faxing.
Note: The maximum scan area for the scanner glass is 216 x 297 mm (8.5 x 11.7 in.).
1Open the top cover.
WFI
IP
R
I
N
T
I
N
G
2Place the original document or item facedown on the scanner glass in the lower right corner.
WFI IP
R
I
N
T
I
N
G
Note: Photos should be loaded as shown.
Loading paper
58
Downloaded From...

3Close the top cover to avoid dark edges on the scanned image.
WFI IP
R
I
N
T
I
N
G
Using the automatic paper type sensor
The printer is equipped with an automatic paper type sensing device. The Paper Type Sensor automatically detects
the type of paper that has been loaded into the printer and adjusts the settings for you. For example, if you want to
print a photo, load photo paper into the printer. The printer detects the type of paper and automatically adjusts the
settings to give you optimum...

Printing
For instructions on additional printing tasks, see the Help associated with the printer software.
Printing basic documents
Printing a document
1Load the paper.
2Do one of the following to print:
Using Windows
aWith a document open in a Windows program , click File  Print.
bClick Properties, Preferences, Options, or Setup.
cSelect the print quality, the number of copies to print, the type of paper to be used, and how the pages should
print.
dClick OK to close any printer software dialogs.
eClick...