Lexmark X4650 User Manual

PressTo
9Cancel a print, copy, or scan job in progress.
Exit from a menu level of the Copy, Scan, Photo, and File Print menus to the top level of a menu.
Exit from a menu level of the Setup menu to the top level of the previous mode.
Clear current settings or error messages, and return to default settings.
10Select a menu item that appears on the display.
Save settings.
Move one level deeper in a submenu.
Feed or eject paper. Press and hold  for 3 seconds to feed or eject paper from the printer.
11Access...

Menus List
Setup menu Photo menu
Maintenance
Ink Levels
Clean Cartridges
Align Cartridges
Print Test Page
Device Setup
Language
Country
Power Saver
Clear Settings Timeout
Network Setup (appears only if the printer is
connected to a network)
Print Setup Page
Wireless Information
TCP/IP
File Print
Reset Network Adapter Defaults
Defaults
Paper Size
Paper Type
Photo Print Size
Set DefaultsNote: The Photo menu is enabled only when you insert a memory
device into the printer.
Easy Photo
Print
Photo Size
Paper...

Copy menu Scan menu PictBridge menu
Copies
Quality
Lighter/Darker
Resize
Original Size
Photo Reprint
Collate
Pages per Sheet
Copies per Sheet
Content TypeScan to
Computer
Network (appears only if the
printer is connected to a network)
USB Flash Drive
Memory Card
Quality
Original SizeNote: The PictBridge menu is enabled
only when you insert a
PictBridge-enabled camera into the
printer.
Photo Size
Paper Size
Paper Type
Layout
Quality
Note: The File Print menu is enabled when you insert a flash drive that...

Using the Scan menu
To access the Scan menu, press  on the printer control panel.
From hereYou can
Scan toChoose the destination of the scanned image.
Select:
Computer
Network (appears only in printers connected to a network)
USB Flash Drive
Memory Card
Notes:
If you choose a computer as the destination, then a list of applications will be
downloaded to the printer. Choose the application that you will use to open the
scanned image on the computer.
If you choose a network computer, you may be prompted to...

From hereYou can
Proof SheetPrint and then scan a proof sheet:
For all photos
For the most recent 20 photos, if there are 20 or more photos on the memory
device
By date
Save PhotosSave photos to a computer or memory device.
Select Computer (appears only in
printers connected to a network)Choose a network computer.
Notes:
You may be prompted to enter a PIN if the computer requires it. To assign a
computer name and a PIN to the network computer, see the Help for the
printer software associated with your...

From hereYou can
Device SetupSelect:
Language to change the language setting.
Country to set the default blank paper size and date format being used
in your location.
Power Saver to set the time that it takes for the printer to switch to
Power Saver mode when left idle.
Clear Settings Timeout to change the time that it takes for the printer
to reset the menus to factory default settings when the printer is left
idle.
Network Setup
Note: Your printer model may not have
wireless capability and may not have...

8Press the arrow buttons to select the default photo print size for the printer, and then press .
9Press  until you exit Setup, or press another mode button.
Changing temporary settings into new default settings
The printer has default temporary settings for the menus. The printer reverts to these default temporary settings
after two minutes of inactivity or after the printer is turned off:
Temporary settings
Copy menuCopies
Resize
Lighter/Darker
Quality
Copies per Sheet
Pages per Sheet
Original Size...

3Press the arrow buttons until Clear Settings Timeout appears, and then press .
4Press the arrow buttons until Never appears, and then press .
5Press  until you exit Setup, or press another mode button.
Changing the Power Saver timeout
You can customize the Power Saver timeout of the printer. The Power Saver timeout is the time it takes for the printer
to switch to Power Saver mode when the printer is left idle. Change the Power Saver timeout to avoid interruptions
when doing multiple jobs on your...

3Choose the printer and the printer driver for your operating system.
4Follow the instructions on the screens to download the driver and install the printer software.
Installing the optional XPS driver (Windows Vista users only)
The XML Paper Specification (XPS) driver is an optional printer driver designed to make use of the advanced XPS
color and graphics features that are available only for Windows Vista users. To use XPS features, you must install the
XPS driver as an additional driver after you...

Using the Windows printer software
When you set up the printer using the printer software CD, all the necessary software was installed. You may have
chosen to install some additional programs. The following table provides an overview of various software programs
and what they can help you do.
Note: Your printer may not come with some of these programs or some of the functions of these programs, depending
on the features of the printer that you purchased.
Use theTo
LexmarkTM Productivity StudioScan, copy,...