Lexmark X4650 User Manual

Use theTo
Printing PreferencesWhen you select File  Print with a document open and then click
Properties, a Printing Preferences dialog appears. The dialog lets you select
options for the print job such as the following:
Select the number of copies to be printed.
Print two-sided copies.
Select the paper type.
Add a watermark.
Enhance images.
Save settings.
Note: Printing Preferences is installed automatically with the printer software.
If you have not installed these additional programs during initial...

Use theTo
Lexmark Printer UtilityGet help with cartridge installation.
Print a test page.
Print an alignment page.
Clean the print cartridge nozzles.
Order ink or supplies.
Register the printer.
Contact customer support.
Lexmark Wireless Setup AssistantSet up the printer on a wireless network.
Note: Your printer may not come with these applications, depending on the features of the printer that you
purchased.
Switching between the rear USB port and the Quick
Connect laptop port (selected models only)
If...

Using Macintosh
aInsert the installation software CD.
bWait for the Welcome screen to appear.
Note: If the Welcome screen does not appear after a minute, then click the CD icon on the desktop.
cDouble-click Install.
dFollow the instructions on the computer screen.
Setting up the printer
33
Downloaded From ManualsPrinter.com Manuals 

Installing the printer on a wireless network
(selected models only)
Wireless network compatibility
Your printer contains an IEEE 802.11g wireless print server. Your printer is compatible with IEEE 802.11 b/g/n routers
that are Wi-Fi certified. If you are having issues with an n router, verify with your router manufacturer that the current
mode setting is compatible with g devices, as this setting varies depending on the router brand/model.
Information you will need to set up the printer on a
wireless...

Installing the printer on a wireless network
Before you install the printer on a wireless network, make sure that:
You have completed the initial setup of the printer.
Your wireless network is set up and working properly.
The computer you are using is connected to the same wireless network where you want to set up the printer.
Using Windows
1Insert the installation software CD.
2Wait a minute for the Welcome screen to appear.
If the Welcome screen does not appear after a minute, do one of the following:...

4If there is an associate/registration button on the back of your box, press it when you are prompted to choose a
network.
Note: After pressing the associate/register button, you have five minutes to complete the printer installation.
5Return to the computer screen, and choose the network you want to connect to. If you want to use the network
shown, choose Connect to , and then click Continue.
If you do not want to use the network shown:
aChoose Connect to another network, and then click Continue....

Blinking orange may indicate that:
–The printer is out of the range of the wireless access point (wireless router).
–The printer is trying to communicate with the wireless access point (wireless router), but the wireless access
point (wireless router) may be turned off or not working properly.
–The printer is trying to establish communication with the wireless access point (wireless router).
This is true if you have already configured the printer for use on your wireless network. When the printer has...

Using the Network Setup menu
The Network Setup menu is available only if your printer model has an internal wireless print server, and if the printer
is connected to a network. Use this menu to view the wireless settings of the printer, print a network setup page, and
reset the internal wireless print server.
1From the printer control panel, press .
2Press the arrow buttons until Network Setup appears, and then press .
From hereYou can
Print Setup PagePrint a network setup page.
Wireless InformationView...

Using Windows
1Insert the installation software CD.
2Wait for the Welcome screen to appear.
If the Welcome screen does not appear after a minute, do one of the following:
In Windows Vista
aClick .
bIn the Start Search box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
In Windows XP and earlier
aClick Start.
bClick Run.
cType D:\setup.exe, where D is the letter of your CD or DVD drive.
3Follow the on-screen instructions for installing a configured printer on a new computer.
Using...

5In the Connect to a Network dialog, click Set up a wireless ad-hoc (computer-to-computer) network, and then
click Next.
6Follow the instructions in the “Set up a wireless ad hoc network” wizard. As part of the setup:
aCreate a network name or SSID for the network between the computer and your printer.
bWrite the name of your network in the space provided so you can refer to it when running the wireless setup.
Make sure you copy the exact spelling and capitalization.
SSID (name of your wireless network)...