Lexmark X342n User Manual
Here you can view all the pages of manual Lexmark X342n User Manual. The Lexmark manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 61
Maintaining the MFP 61 9 Maintaining the MFP Removing a toner cartridge 1Press the access button on the left side of the MFP, and open the front cover. 2To remove the toner cartridge: aPress the button on the print cartridge assembly. bRemove the toner cartridge using the handle. To return the empty toner cartridge, see Recycling Lexmark products on page 70 for more information. 1 2 1 2 Downloaded From ManualsPrinter.com Manuals
Page 62
Installing a toner cartridge 62 Installing a toner cartridge 1If you are installing a new toner cartridge, remove the toner cartridge from the packaging, and gently shake four or five times to distribute the toner. 2Gently slide the toner cartridge in until it locks into place. Downloaded From ManualsPrinter.com Manuals
Page 63
Redistributing toner 63 3 Close the front cover. Note:The front cover must be closed to start a new print, copy, scan, or fax job. Redistributing toner Redistribute the toner if you are dissatisfied with print quality or if the error message on the display is 88 Toner Low. Note:If the error message reappears after redistributing the toner, replace the toner cartridge. For more information, see Removing a toner cartridge on page 61 and Installing a toner cartridge on page 62. 1Press the access button...
Page 64
Redistributing toner 64 2 To remove the toner cartridge: aPress the button on the print cartridge assembly. bRemove the toner cartridge using the handle. 3Firmly shake the cartridge in all directions to distribute the toner. 4Reinstall the cartridge, and close the front cover. Note:If print quality does not improve, replace the toner cartridge. 1 2 Downloaded From ManualsPrinter.com Manuals
Page 65
Replacing the photoconductor 65 Replacing the photoconductor 1Press the access button on the left side of the MFP, and open the front cover. 2Pull on the handle to remove the print cartridge assembly. 3Place the print cartridge assembly on a flat, clean surface. 1 2 Downloaded From ManualsPrinter.com Manuals
Page 66
Replacing the photoconductor 66 4 To remove the toner cartridge: aPress the button on the print cartridge assembly. bRemove the toner cartridge using the handle. 5Unpack the photoconductor kit. 6Install the toner cartridge into the new photoconductor. Note:The toner cartridge snaps into place when correctly installed. 7Reinstall the print cartridge assembly. 8Press and hold Stop for three seconds to reset photoconductor recount. 9Close the front cover. Downloaded From ManualsPrinter.com Manuals
Page 67
Cleaning the MFP 67 Cleaning the MFP To maintain print quality, follow these cleaning procedures each time the toner cartridge is replaced or if print quality problems occur. Warning:Do not put water directly on the MFP or use ammonia–based cleaners or volatile solvents, such as paint thinner, on the MFP. Cleaning the scanner glass 1Slightly dampen a soft, lint–free cloth or paper towel with water. 2Open the top cover. 3Wipe the surfaces of the scanner glass and ADF until they are clean and dry. 4Wipe...
Page 68
Cleaning the MFP 68 Cleaning the inside of the MFP CAUTION:The fuser area is hot. Avoid contact with the fuser area to prevent burns. Warning:While cleaning the inside of the MFP, be careful not to touch the transfer roller located under the toner cartridge. Oil from your fingers can affect print quality. 1Turn the MFP off, unplug the power cord, and then wait for the MFP to cool down. 2Open the front cover, and pull on the handle to remove the print cartridge assembly. Warning:Do not touch the green...
Page 69
Cleaning the MFP 69 4 With a dry, lint–free cloth, wipe away any dust and spilled toner from the print cartridge area. Warning: To prevent damage to the print cartridge assembly, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary. Do not touch the black transfer roller. 5Reinsert the print cartridge assembly, and close the front cover. 6Plug in the power cord and turn the MFP on. Downloaded From ManualsPrinter.com Manuals
Page 70
Ordering supplies 70 Ordering supplies To order supplies or to locate a dealer near you, visit our Web site: www.lexmark.com. Recycling Lexmark products To return Lexmark products to Lexmark for recycling: 1Visit our Web site: www.lexmark.com/recycle. 2Follow the instructions on the computer screen. Par t numberItemAverage yield X340A11G Return program toner cartridge (X340/X340n/X342n)2500 standard pages 1 X340H11G High yield return program toner cartridge (X342n) 6000 standard pages1 X340H22G...