Lexmark X 850 Owners Manual
Have a look at the manual Lexmark X 850 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Repair information4-323 7500-XXX Exit 2 actuator removal 1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315. 2.Open the exit 2 unit assembly. 3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319. 4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320. 5.Release the spring (A) on the exit 2 actuator (B). 6.Move the exit 2 actuator (B) to the right in the direction of the arrow to release two hooks. 7.Remove the exit 2 actuator (B). 8.Remove the spring (A) from the exit 2 actuator (B). Note: Before reinstalling the exit 2 actuator (B), ensure the spring (A) is properly installed. BB AA Front
4-324MFP Service Manual 7500-XXX Exit 2 switch (exit 2 left door interlock) removal 1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315. 2.Open the exit 2 unit assembly. 3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319. 4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320. 5.Release the hooks securing the switch (exit 2 left door interlock) (A) to the exit 2 unit assembly. 6.Remove the switch (exit 2 door interlock) (A). Harness Guides FrontA
Repair information4-325 7500-XXX 7.Remove the connector from the exit 2 switch (exit 2 left door interlock) (A). Note: Before reinstalling the switch (exit 2 left door interlock) (A), ensure all the harnesses and connectors are properly installed. CONNECTOR A FRONT
4-326MFP Service Manual 7500-XXX Exit 2 media shift gear removal 1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315. 2.Open the exit 2 unit assembly. 3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319. 4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320. 5.Move the roll assembly (A) fully to the right (front). 6.Lift the exit 2 media shift gear (B) upward to release it from the exit 2 unit assembly. 7.Release the hook on the exit 2 media shift gear (B) from the hole in the roll assembly (A). 8.Remove the exit 2 media shift gear (B). A B A HOOKHOLE FRONT B A
Repair information4-327 7500-XXX Exit 2 media diverter solenoid removal 1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315. 2.Open the exit 2 unit assembly. 3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319. 4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320. 5.Disconnect the media diverter solenoid (A). 6.Release the harness from the clamp. 7.Remove the screw securing the media diverter solenoid (A) to the exit 2 unit assembly. 8.Remove the media diverter solenoid (A). 9.Move the media diverter link (B) toward the top of the exit 2 unit assembly in the direction of the arrow. 10.Remove the media diverter link (B) from the media diverter solenoid (A). B A Connector Front Clamp
4-328MFP Service Manual 7500-XXX Exit 2 sensor (exit 2) removal 1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315. 2.Open the exit 2 unit assembly. 3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319. 4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320. 5.Disconnect the connector from the sensor (exit 2) (A). 6.Pull the exit 2 sensor (actuator) (B) back in the direction of the arrow. 7.Release the hooks securing the sensor (exit 2) (A) to the exit 2 unit assembly. 8.Remove the sensor (exit 2) (A). AConnector Front B Hook
Repair information4-329 7500-XXX Exit 2 sensor (exit 2 media shift HP) removal 1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315. 2.Open the exit 2 unit assembly. 3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319. 4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320. 5.Remove the exit 2 media shift gear. See “Exit 2 media shift gear removal” on page 4-326. 6.Rotate the shift assembly (A) upward in the direction of the arrow. 7.Disconnect the connector from the sensor (exit 2 media shift HP) (B). 8.Release the hooks securing the sensor (exit 2 media shift HP) (B) to the exit 2 unit assembly. 9.Remove the sensor (exit 2 media shift HP) (B). LOW CHUTE B A Connector Hooks Rear
4-330MFP Service Manual 7500-XXX Exit 2 sensor (standard bin full exit 2) removal 1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315. 2.Open the exit 2 unit assembly. 3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319. 4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320. 5.Disconnect the sensor (standard bin full exit 2) (A). 6.Release the hooks to the sensor (standard bin full exit 2) (A) from the exit 2 unit assembly. 7.Remove the sensor (standard bin full exit 2) (A). A FrontHook Connector
Repair information4-331 7500-XXX Exit 2 cooling fan removal 1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315. 2.Open the exit 2 unit assembly. 3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319. 4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320. 5.Disconnect the connector from the exit 2 cooling fan (A). 6.Remove the harness from the hole in the exit 2 unit assembly. 7.Remove the screw securing the exit 2 cooling fan (A) to the exit 2 unit assembly. 8.Remove the exit 2 cooling fan (A). HoleA Marker Cover RearClamp Clamp A Connector