Lexmark E462DTN User Manual

							Menu itemDescription
Print Area
Normal
Whole PageSets the logical and physical printable area
Notes:
This menu does not appear if Edge to Edge is enabled in the
printer Setup menu.
Normal is the factory default setting. When attempting to
print data in the non‑printable area defined by the Normal
setting, the printer clips the image at the boundary.
The Whole Page setting allows the image to be moved into
the non‑printable area defined by the Normal setting, but
the printer will clip the image at the Normal setting
boundary.
The Whole Page setting affects only pages printed using a
PCL 5e interpreter. This setting has no effect on pages
printed using the PCL XL or PostScript interpreter.
Download Target
RAM
FlashSets the storage location for downloads
Notes:
RAM is the factory default setting.
Storing downloads in flash memory places them in
permanent storage. Downloads remain in flash memory even
when the printer is turned off.
Storing downloads in RAM is temporary.
This menu appears only if optional flash memory is installed.
Resource Save
On
OffSpecifies how the printer handles temporary downloads, such as
fonts and macros stored in RAM, when the printer receives a job
that requires more memory than is available
Notes:
Off is the factory default setting. Off sets the printer to retain
the downloads only until memory is needed. Downloads are
deleted in order to process print jobs.
The On setting retains the downloads during language
changes and printer resets. If the printer runs out of
memory, 38 Memory full appears, and downloads are
not deleted.
Print All Order
Alphabetically
Newest First
Oldest FirstSpecifies the order in which held and confidential jobs are printed
when Print All is selected
Notes:
Alphabetically is the factory default setting.
Print jobs always appear in alphabetical order on the printer
control panel.
Understanding printer menus101
Downloaded From ManualsPrinter.com Manuals 
						

							Finishing menu
Menu itemDescription
Sides (Duplex)
2 sided
1 sidedSpecifies whether duplex (2‑sided) printing is set as the default for all print jobs
Notes:
1 sided is the factory default setting.
To set 2‑sided printing from the software program: for Windows users, click
File > Print, and then click Properties, Preferences, Options, or Setup; for
Macintosh users, choose File > Print, and then adjust the settings from the
Print dialog and pop‑up menus.
Duplex Binding
Long Edge
Short EdgeDefines the way duplexed pages are bound and how the printing on the back of the
page is oriented in relation to the printing on the front of the page
Notes:
Long Edge is the factory default setting.
Long Edge specifies that binding be placed on the left edge of portrait pages
and the top edge of landscape pages.
Short Edge specifies that binding be placed on the top edge of portrait pages
and the left edge of landscape pages.
Copies
1–999Specifies a default number of copies for each print job
Note: 1 is the factory default setting.
Blank Pages
Do Not Print
PrintSpecifies whether blank pages are inserted in a print job
Note: Do Not Print is the factory default setting.
Collate
Off (1,1,1,2,2,2)
On (1,2,1,2,1,2)Stacks the pages of a print job in sequence when printing multiple copies
Notes:
Off is the factory default setting. No pages will be collated.
The On setting stacks the print job sequentially.
Both settings print the entire job the number of times specified by the Copies
menu setting.
Separator Sheets
None
Between Copies
Between Jobs
Between PagesSpecifies whether blank separator sheets are inserted
Notes:
None is the factory default setting.
Between Copies inserts a blank sheet between each copy of a print job if
Collation is set to On. If Collation is set to Off, a blank page is inserted between
each set of printed pages, such as after all page 1s and after all page 2s.
Between Jobs inserts a blank sheet between print jobs.
Between Pages inserts a blank sheet between each page of the print job. This
setting is useful when printing transparencies or inserting blank pages in a
document for notes.
Understanding printer menus102
Downloaded From ManualsPrinter.com Manuals 
						

							Menu itemDescription
Separator Source
Tray 
Multi‑Purpose FeederSpecifies the paper source for separator sheets
Notes:
Tray 1 (standard tray) is the factory default setting.
From the Paper menu, Configure MP must be set to Cassette in order for
Multi‑Purpose Feeder to appear as a menu setting.
N‑up (pages‑side)
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑UpSpecifies that multiple‑page images be printed on one side of a sheet of paper
Notes:
Off is the factory default setting.
The number selected is the number of page images that will print per side.
N‑up Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
VerticalSpecifies the positioning of multiple‑page images when using N‑up (pages‑sides)
Notes:
Horizontal is the factory default setting.
Positioning depends on the number of images and whether the images are in
portrait or landscape orientation.
Orientation
Auto
Landscape
PortraitSpecifies the orientation of a multiple‑page sheet
Notes:
Auto is the factory default setting. The printer chooses between portrait and
landscape.
Landscape uses Long Edge.
Portrait uses Short Edge.
N‑up Border
None
SolidPrints a border around each page image when using N‑up (pages‑sides)
Note: None is the factory default setting.
Quality menu
Menu itemDescription
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 IQ
2400 IQSpecifies the printed output resolution
Note: 600 dpi is the factory default setting.
Understanding printer menus103
Downloaded From ManualsPrinter.com Manuals 
						

							Menu itemDescription
Toner Darkness
1–10Lightens or darkens the printed output
Notes:
8 is the factory default setting.
Selecting a smaller number can help conserve toner.
Enhance Fine Lines
On
OffEnables a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts
Notes:
Off is the factory default setting.
To set Enhance Fine Lines from the software program: for Windows users, click
File  > Print, and then click Properties, Preferences, Options, or Setup, and
change the settings from the Print Quality tab; for Macintosh users, choose File >
Print, and then adjust the settings from the Print dialog and pop‑up menus.
To set Enhance Fine Lines using the Embedded Web Server, type the network
printer IP address in a browser window, and from Print Settings, click Quality
Menu.
Gray Correction
Auto
OffAutomatically adjusts the contrast enhancement applied to images
Note: Auto is the factory default setting.
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both DirectionsEnables more pixels to print in clusters for clarity, in order to enhance pictures
horizontally or vertically, or to enhance fonts
Note: Off is the factory default setting.
Brightness
‑6–6Adjusts the printed output either by lightening or darkening it. You can conserve toner
by lightening the output.
Note: 0 is the factory default setting.
Contrast
0–5Adjusts the contrast of printed objects
Note: 0 is the factory default setting.
Understanding printer menus104
Downloaded From ManualsPrinter.com Manuals 
						

							Utilities menu
Menu itemDescription
Format Flash
Yes
NoFormats the flash memory. Flash memory refers to the memory added by installing
an optional flash memory card in the printer.
Warning—Potential Damage: Do not turn off the printer while the flash memory is
formatting.
Notes:
An optional flash memory card must be installed in the printer and operating
properly for this menu item to be available. The flash memory card must not
be Read/Write or Write protected or defective.
No cancels the format request.
Yes deletes all data stored in flash memory.
Defragment Flash
No
YesPrepares the flash memory to receive new data by retrieving lost storage space
Warning—Potential Damage: Do not turn off the printer while the flash memory is
defragmenting.
Notes:
This setting appears only on non‑APA models.
An optional flash memory card must be installed in the printer and operating
properly for this menu item to be available. The flash memory card must not
be Read/Write or Write protected or defective.
No cancels the defragment request.
Yes reformats the flash memory after transferring all downloads to regular
printer memory. When formatting is complete, the downloads are loaded back
into flash memory.
Hex Trace
ActivateAssists in isolating the source of a print job problem
Notes:
When Activate is selected, all data sent to the printer is printed in
hexadecimal, and character representation and control codes are not
executed.
To exit Hex Trace, turn the printer off or reset the printer.
Coverage Estimator
Off
OnProvides an estimate of the percentage coverage of black toner on a page. The
estimate is printed on a separator page.
Note: Off is the factory default setting.
XPS menu
Menu itemDescription
Print Error Pages
Off
OnPrints a page containing information on errors, including XML markup errors
Note: Off is the factory default setting.
Understanding printer menus105
Downloaded From ManualsPrinter.com Manuals 
						

							PDF menu
Menu itemDescription
Scale to Fit
Yes
NoScales page content to fit the selected paper size
Note: No is the factory default setting.
Annotations
Do Not Print
PrintPrints annotations in a PDF
Note: Do Not Print is the factory default setting.
PostScript menu
Menu itemDescription
Print PS Error
On
OffPrints a page containing the PostScript error
Note: Off is the factory default setting.
Font Priority
Resident
FlashEstablishes the font search order
Notes:
Resident is the factory default setting.
A formatted optional flash memory card must be installed in the printer
and operating properly for this menu item to be available.
The optional flash memory card cannot be Read/Write, Write, or
password protected.
Job Buffer Size must not be set to 100%.
PCL Emul menu
Menu itemDescription
Font Source
Resident
Download
Flash
AllSpecifies the set of fonts available
Notes:
Resident is the factory default setting. It shows the factory default set of
fonts downloaded into RAM.
Download appears only if downloaded fonts exist. It shows all the fonts
downloaded into RAM.
Flash appears only if an optional flash memory card containing fonts is
installed.
An optional flash memory card must be properly formatted and cannot be
Read/Write, Write, or password protected.
All shows all fonts available to any option.
Font Name
Lets you view or change the setting from a selection list
Understanding printer menus106
Downloaded From ManualsPrinter.com Manuals 
						

							Menu itemDescription
Symbol Set
Lets you view or change the setting from a selection list
PCL Emulation Settings
Point Size
1.00–1008.00Changes the point size for scalable typographic fonts
Notes:
12 is the factory default setting.
Point Size refers to the height of the characters in the font. One point
equals approximately 1/72 of an inch.
Point sizes can be increased or decreased in 0.25‑point increments.
PCL Emulation Settings
Pitch
0.08–100Specifies the font pitch for scalable monospaced fonts
Notes:
10 is the factory default setting.
Pitch refers to the number of fixed‑space characters per inch (cpi).
Pitch can be increased or decreased in 0.01‑cpi increments.
For nonscalable monospaced fonts, the pitch appears on the display but
cannot be changed.
PCL Emulation Settings
Orientation
Portrait
LandscapeSpecifies the orientation of text and graphics on the page
Notes:
Portrait is the factory default setting.
Portrait prints text and graphics parallel to the short edge of the page.
Landscape prints text and graphics parallel to the long edge of the page.
PCL Emulation Settings
Lines per Page
1–255Specifies the number of lines that print on each page
Notes:
60 is the US factory default setting. 64 is the international factory default
setting.
The printer sets the amount of space between each line based on the Lines
per Page, Paper Size, and Orientation settings. Select the desired Paper
Size and Orientation before setting Lines per Page.
PCL Emulation Settings
A4 Width
198 mm
203 mmSets the printer to print on A4‑size paper
Notes:
198 mm is the factory default setting.
The 203‑mm setting sets the width of the page to allow the printing of
eighty 10‑pitch characters.
PCL Emulation Settings
Auto CR after LF
On
OffSpecifies whether the printer automatically performs a carriage return (CR) after
a line feed (LF) control command
Note: Off is the factory default setting.
Understanding printer menus107
Downloaded From ManualsPrinter.com Manuals 
						

							Menu itemDescription
PCL Emulation Settings
Auto LF after CR
On
OffSpecifies whether the printer automatically performs a line feed (LF) after a
carriage return (CR) control command
Note: Off is the factory default setting.
Tray Renumber
Assign MP Feeder
Off
None
0–199
Assign Tray 
Off
None
0–199
Assign Manual Paper
Off
None
0–199
Assign Man Env
Off
None
0–199Configures the printer to work with printer software or programs that use
different source assignments for trays, drawers, and feeders
Notes:
Off is the factory default setting.
None is not an available selection. It is displayed only when it is selected by
the PCL 5 interpreter.
None ignores the Select Paper Feed command.
0–199 allows a custom setting to be assigned.
Tray Renumber
View Factory Def
Multipurpose feeder default = 8
Tray 1 default = 1
Tray 2 default = 4
Tray 3 default = 5
Tray 4 default = 20
Tray 5 default = 21
Envelope default = 6
Manual paper default = 2
Manual envelope default = 3Lets you view the factory default setting assigned to each tray, drawer, or feeder
Note: The factory default settings appear even if the source is not installed.
Tray Renumber
Restore Defaults
Yes
NoReturns all tray, drawer, and feeder assignments to the factory default settings
Understanding printer menus108
Downloaded From ManualsPrinter.com Manuals 
						

							HTML menu
Menu itemDescription
Font Name
Albertus MT
Antique Olive
Apple Chancery
Arial MT
Avant Garde
Bodoni
Bookman
Chicago
Clarendon
Cooper Black
Copperplate
Coronet
Courier
Eurostile
Garamond
Geneva
Gill Sans
Goudy
Helvetica
Hoefler TextIntl CG Times
Intl Courier
Intl Univers
Joanna MT
Letter Gothic
Lubalin Gothic
Marigold
MonaLisa Recut
Monaco
New CenturySbk
New York
Optima
Oxford
Palatino
StempelGaramond
Taffy
Times
TimesNewRoman
Univers
Zapf ChancerySets the default font for HTML documents
Note: The Times font will be used in HTML documents that do not
specify a font.
Menu itemDescription
Font Size
1–255 ptSets the default font size for HTML documents
Notes:
12 pt is the factory default setting.
Font size can be increased in 1‑point increments.
Scale
1–400%Scales the default font for HTML documents
Notes:
100% is the factory default setting.
Scaling can be increased in 1% increments.
Orientation
Portrait
LandscapeSets the page orientation for HTML documents
Note: Portrait is the factory default setting.
Margin Size
8–255 mmSets the page margin for HTML documents
Notes:
19 mm is the factory default setting.
Margin size can be increased in 1‑mm increments.
Understanding printer menus109
Downloaded From ManualsPrinter.com Manuals 
						

							Menu itemDescription
Backgrounds
Do Not Print
PrintSpecifies whether to print backgrounds on HTML documents
Note: Print is the factory default setting.
Image menu
Menu itemDescription
Auto Fit
On
OffSelects the optimal paper size, scaling, and orientation
Notes:
On is the factory default setting.
The On setting overrides scaling and orientation settings for some images.
Invert
On
OffInverts bi‑tonal monochrome images
Notes:
Off is the factory default setting.
The font size can be increased in 1‑point increments.
This setting does not apply to GIF or JPEG images.
Scaling
Anchor Top Left
Best Fit
Anchor Center
Fit Height/Width
Fit Height
Fit WidthScales the image to fit the selected paper size
Notes:
Best Fit is the factory default setting.
When Auto Fit is set to On, Scaling is automatically set to Best Fit.
Orientation
Portrait
Landscape
Rev Portrait
Rev LandscapeSets the image orientation
Note: Portrait is the factory default setting.
Understanding printer menus110
Downloaded From ManualsPrinter.com Manuals