Home > Lexmark > Printer > Lexmark E360dn User Manual

Lexmark E360dn User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lexmark E360dn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Laser advisory label
    A laser notice label may be affixed to this printer as shown:
    Power consumption
    Product power consumption
    The following table documents the power consumption characteristics of the product.
    Note: Some modes may not apply to your product.
    ModeDescriptionPower consumption
    (Watts)
    Printing The product is generating hard‑copy output from electronic inputs. 500
    Copying The product is generating hard‑copy output from hard‑copy original documents. NA
    Scanning The product is scanning hard‑copy documents. NA
    Ready The product is waiting for a print job. 12
    Power Saver The product is in energy‑saving mode. 11
    Off The product is plugged into a wall outlet, but the power switch is turned off. NA
    The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
    power draws may be substantially higher than the average.
    Values are subject to change. See www.lexmark.com for current values.
    Power Saver
    This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the
    Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity.
    Notices
    131
    Downloaded From ManualsPrinter.com Manuals 
    						
    							The Power Saver Mode is automatically engaged after this product is not used for a specified period of time, called the
    Power Saver Timeout.
    Factory default Power Saver Timeout for this product (in minutes): 30
    By using the configuration menus, the Power Saver Timeout can be modified between 1 minute and 240 minutes.
    Setting the Power Saver Timeout to a low value reduces energy consumption, but may increase the response time of
    the product. Setting the Power Saver Timeout to a high value maintains a fast response, but uses more energy.
    Off mode
    If this product has an off mode which still consumes a small amount of power, then to completely stop product power
    consumption, disconnect the power supply cord from the wall outlet.
    Total energy usage
    It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in
    power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in
    order to calculate energy usage. The total product energy usage is the sum of each modes energy usage.
    Industry Canada compliance statement
    This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard
    ICES-003.
    Avis de conformité aux normes de l’industrie du Canada
    Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements
    pouvant causer des interférences NMB-003.
    Regulatory notices for wireless products
    This section contains the following regulatory information pertaining to wireless products that contain transmitters,
    for example, but not limited to, wireless network cards or proximity card readers.
    Exposure to radio frequency radiation
    The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory
    agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for
    this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.
    Industry Canada (Canada)
    This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions:
    (1) this device may not cause interference, and (2) this device must accept any interference, including interference that
    may cause undesired operation of the device.
    Notices
    132
    Downloaded From ManualsPrinter.com Manuals 
    						
    							This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited
    per regulations of Industry Canada.
    To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
    windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to
    licensing.
    The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF
    fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health
    Canadas Web site www.hc-sc.gc.ca/rpb.
    The term IC: before the certification/registration number only signifies that the Industry Canada technical
    specifications were met.
    Industry Canada (Canada)
    Cet appareil est conforme à la norme RSS-210 dIndustry Canada. Son fonctionnement est soumis aux deux conditions
    suivantes :
    (1) cet appareil ne doit pas provoquer dinterférences et (2) il doit accepter toute interférence reçue, y compris celles
    risquant daltérer son fonctionnement.
    Cet appareil a été conçu pour fonctionner uniquement avec lantenne fournie. Lutilisation de toute autre antenne est
    strictement interdite par la réglementation dIndustry Canada.
    En application des réglementations dIndustry Canada, lutilisation dune antenne de gain supérieur est strictement
    interdite.
    Pour empêcher toute interférence radio au service faisant lobjet dune licence, cet appareil doit être utilisé à lintérieur
    et loin des fenêtres afin de garantir une protection optimale.
    Si le matériel (ou son antenne démission) est installé à lextérieur, il doit faire lobjet dune licence.
    Linstallateur de cet équipement radio doit veiller à ce que lantenne soit implantée et dirigée de manière à némettre
    aucun champ HF dépassant les limites fixées pour lensemble de la population par Santé Canada. Reportez-vous au
    Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb.
    Le terme « IC » précédant le numéro de daccréditation/inscription signifie simplement que le produit est conforme
    aux spécifications techniques dIndustry Canada.
    Notice to users in the European Union
    Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC,
    2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to
    electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio
    equipment and telecommunications terminal equipment.
    Compliance is indicated by the CE marking.
    The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA.
    The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium
    Notices
    133
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon
    request from the Authorized Representative.
    This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.
    Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council
    directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the
    Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain
    voltage limits and on radio equipment and telecommunications terminal equipment.
    Compliance is indicated by the CE marking.
    Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.
    The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA.
    The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium
    Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon
    request from the Authorized Representative.
    Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními
    požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
    Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante
    krav i direktiv 1999/5/EF.
    Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den
    grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG
    befindet.
    Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ
    ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ
    ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
    English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the
    essential requirements and other relevant provisions of Directive 1999/5/EC.
    Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos
    esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
    Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ
    põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.
    Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten
    ja muiden sitä koskevien direktiivin ehtojen mukainen.
    Français Par la présente, Lexmark International, Inc. déclare que lappareil ce produit est conforme aux exigences
    fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.
    Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ
    követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
    Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar
    kröfur, sem gerðar eru í tilskipun 1999/5/EC.
    Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti
    essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
    Notices
    134
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām
    prasībām un citiem ar to saistītajiem noteikumiem.
    LietuviųŠiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas
    1999/5/EB direktyvos nuostatas.
    Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet
    essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.
    Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële
    eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
    Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og
    øvrige relevante krav i direktiv 1999/5/EF.
    Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi
    wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
    Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras
    disposições da Diretiva 1999/5/CE.
    Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky
    príslušné ustanovenia smernice 1999/5/ES.
    Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi
    relevantnimi določili direktive 1999/5/ES.
    Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga
    egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
    Statement of Limited Warranty
    Lexmark E360d and E360dn
    Lexmark International, Inc., Lexington, KY
    This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country-
    specific warranty information that came with your product.
    This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from
    Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”
    Limited warranty
    Lexmark warrants that this product:
    —Is manufactured from new parts, or new and serviceable used parts, which perform like new parts
    —Is, during normal use, free from defects in material and workmanship
    If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair
    or replacement (at Lexmarks option).
    If this product is a feature or option, this statement applies only when that feature or option is used with the product
    for which it was intended. To obtain warranty service, you may be required to present the feature or option with the
    product.
    Notices
    135
    Downloaded From ManualsPrinter.com Manuals 
    						
    							If you transfer this product to another user, warranty service under the terms of this statement is available to that user
    for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that
    user.
    Limited warranty service
    The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later
    provided that the warranty period for any supplies and for any maintenance items included with the printer shall end
    earlier if it, or its original contents, are substantially used up, depleted, or consumed.
    To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver
    your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location.
    You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.
    When warranty service involves the exchange of a product or part, the item replaced becomes the property of the
    Remarketer or Lexmark. The replacement may be a new or repaired item.
    The replacement item assumes the remaining warranty period of the original product.
    Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not
    included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions,
    liens, and encumbrances.
    Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage
    media (unless directed otherwise by Lexmark).
    For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact
    Lexmark on the World Wide Web at http://support.lexmark.com.
    Remote technical support is provided for this product throughout its warranty period. For products no longer covered
    by a Lexmark warranty, technical support may not be available or only be available for a fee.
    Extent of limited warranty
    Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints
    produced by any product.
    Warranty service does not include repair of failures caused by:
    —Modification or unauthorized attachments
    —Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance
    —Unsuitable physical or operating environment
    —Maintenance by anyone other than Lexmark or a Lexmark authorized servicer
    —Operation of a product beyond the limit of its duty cycle
    —Use of printing media outside of Lexmark specifications
    —Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts
    —Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark
    TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR
    REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH
    RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF
    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT
    MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO
    Notices
    136
    Downloaded From ManualsPrinter.com Manuals 
    						
    							WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES,
    AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.
    Limitation of liability
    Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or
    nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual
    damages up to the limit set forth in the following paragraph.
    Lexmarks liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product
    that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real
    property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR
    ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES.
    This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any
    claim by you based on a third party claim.
    This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmarks and its
    Suppliers and Remarketers limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended
    beneficiaries of this limitation.
    Additional rights
    Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation
    of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.
    This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.
    LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT
    PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT: BY USING THIS PRODUCT, YOU AGREE TO BE BOUND BY ALL
    THE TERMS AND CONDITIONS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT. IF YOU DO NOT
    AGREE WITH THE TERMS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT, PROMPTLY RETURN THE
    PRODUCT UNUSED AND REQUEST A REFUND OF THE AMOUNT YOU PAID. IF YOU ARE INSTALLING THIS PRODUCT FOR
    USE BY OTHER PARTIES, YOU AGREE TO INFORM THE USERS THAT USE OF THE PRODUCT INDICATES ACCEPTANCE OF
    THESE TERMS.
    LEXMARK SOFTWARE LICENSE AGREEMENT
    This License Agreement (“Software License Agreement”) is a legal agreement between you (either an individual or a
    single entity) and Lexmark International, Inc. (“Lexmark”) that, to the extent your Lexmark product or Software Program
    is not otherwise subject to a written software license agreement between you and Lexmark or its suppliers, governs
    your use of any Software Program installed on or provided by Lexmark for use in connection with your Lexmark product.
    The term “Software Program” includes machine-readable instructions, audio/visual content (such as images and
    recordings), and associated media, printed materials and electronic documentation, whether incorporated into,
    distributed with or for use with your Lexmark product.
    1STATEMENT OF SOFTWARE LIMITED WARRANTY. Lexmark warrants that the media (e.g., diskette or compact disk)
    on which the Software Program (if any) is furnished is free from defects in materials and workmanship under normal
    use during the warranty period. The warranty period is ninety (90) days and commences on the date the Software
    Program is delivered to the original end-user. This limited warranty applies only to Software Program media
    purchased new from Lexmark or an Authorized Lexmark Reseller or Distributor. Lexmark will replace the Software
    Program should it be determined that the media does not conform to this limited warranty.
    Notices
    137
    Downloaded From ManualsPrinter.com Manuals 
    						
    							2DISCLAIMER AND LIMITATION OF WARRANTIES. EXCEPT AS PROVIDED IN THIS SOFTWARE LICENSE AGREEMENT
    AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, LEXMARK AND ITS SUPPLIERS PROVIDE THE
    SOFTWARE PROGRAM AS IS AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS
    OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, TITLE, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR
    A PARTICULAR PURPOSE, AND ABSENCE OF VIRUSES, ALL WITH REGARD TO THE SOFTWARE PROGRAM. TO THE
    EXTENT LEXMARK CANNOT BY LAW DISCLAIM ANY COMPONENT OF THE IMPLIED WARRANTIES OF
    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, LEXMARK LIMITS THE DURATION OF SUCH
    WARRANTIES TO THE 90-DAY TERM OF THE EXPRESS SOFTWARE LIMITED WARRANTY.
    This Agreement is to be read in conjunction with certain statutory provisions, as that may be in force from time to
    time, that imply warranties or conditions or impose obligations on Lexmark that cannot be excluded or modified.
    If any such provisions apply, then to the extent Lexmark is able, Lexmark hereby limits its liability for breach of those
    provisions to one of the following: providing you a replacement copy of the Software Program or reimbursement
    of the price paid for the Software Program.
    The Software Program may include internet links to other software applications and/or internet web pages hosted
    and operated by third parties unaffiliated with Lexmark. You acknowledge and agree that Lexmark is not responsible
    in any way for the hosting, performance, operation, maintenance, or content of, such software applications and/or
    internet web pages.
    3LIMITATION OF REMEDY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY AND ALL LIABILITY OF
    LEXMARK UNDER THIS SOFTWARE LICENSE AGREEMENT IS EXPRESSLY LIMITED TO THE GREATER OF THE PRICE PAID
    FOR THE SOFTWARE PROGRAM AND FIVE U.S. DOLLARS (OR THE EQUIVALENT IN LOCAL CURRENCY). YOUR SOLE
    REMEDY AGAINST LEXMARK IN ANY DISPUTE UNDER THIS SOFTWARE LICENSE AGREEMENT SHALL BE TO SEEK TO
    RECOVER ONE OF THESE AMOUNTS, UPON PAYMENT OF WHICH LEXMARK SHALL BE RELEASED AND DISCHARGED
    OF ALL FURTHER OBLIGATIONS AND LIABILITY TO YOU.
    IN NO EVENT WILL LEXMARK, ITS SUPPLIERS, SUBSIDIARIES, OR RESELLERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
    INDIRECT, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LOST PROFITS
    OR REVENUES, LOST SAVINGS, INTERRUPTION OF USE OR ANY LOSS OF, INACCURACY IN, OR DAMAGE TO, DATA
    OR RECORDS, FOR CLAIMS OF THIRD PARTIES, OR DAMAGE TO REAL OR TANGIBLE PROPERTY, FOR LOSS OF PRIVACY
    ARISING OUT OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE PROGRAM, OR
    OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS SOFTWARE LICENSE AGREEMENT), REGARDLESS OF
    THE NATURE OF THE CLAIM, INCLUDING BUT NOT LIMITED TO BREACH OF WARRANTY OR CONTRACT, TORT
    (INCLUDING NEGLIGENCE OR STRICT LIABILITY), AND EVEN IF LEXMARK, OR ITS SUPPLIERS, AFFILIATES, OR
    REMARKETERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY YOU BASED
    ON A THIRD-PARTY CLAIM, EXCEPT TO THE EXTENT THIS EXCLUSION OF DAMAGES IS DETERMINED LEGALLY INVALID.
    THE FOREGOING LIMITATIONS APPLY EVEN IF THE ABOVE-STATED REMEDIES FAIL OF THEIR ESSENTIAL PURPOSE.
    4U.S.A. STATE LAWS. This Software Limited Warranty gives you specific legal rights. You may also have other rights
    that vary from state to state. Some states do not allow limitations on how long an implied warranty lasts or the
    exclusion of limitation of incidental or consequential damages, so the above limitations may not apply to you.
    5LICENSE GRANT. Lexmark grants you the following rights provided you comply with all terms and conditions of this
    License Agreement:
    aUse. You may Use one (1) copy of the Software Program. The term “Use” means storing, loading, installing,
    executing, or displaying the Software Program. If Lexmark has licensed the Software Program to you for
    concurrent use, you must limit the number of authorized users to the number specified in your agreement with
    Lexmark. You may not separate the components of the Software Program for use on more than one computer.
    You agree that you will not Use the Software Program, in whole or in part, in any manner that has the effect of
    overriding, modifying, eliminating, obscuring, altering or de-emphasizing the visual appearance of any
    trademark, trade name, trade dress or intellectual property notice that appears on any computer display screens
    normally generated by, or as a result of, the Software Program.
    bCopying. You may make one (1) copy of the Software Program solely for purposes of backup, archiving, or
    installation, provided the copy contains all of the original Software Program’s proprietary notices. You may not
    copy the Software Program to any public or distributed network.
    Notices
    138
    Downloaded From ManualsPrinter.com Manuals 
    						
    							cReservation of Rights. The Software Program, including all fonts, is copyrighted and owned by Lexmark
    International, Inc. and/or its suppliers. Lexmark reserves all rights not expressly granted to you in this License
    Agreement.
    dFreeware. Notwithstanding the terms and conditions of this License Agreement, all or any portion of the
    Software Program that constitutes software provided under public license by third parties (“Freeware”) is
    licensed to you subject to the terms and conditions of the software license agreement accompanying such
    Freeware, whether in the form of a discrete agreement, shrink-wrap license, or electronic license terms at the
    time of download. Use of the Freeware by you shall be governed entirely by the terms and conditions of such
    license.
    6TRANSFER. You may transfer the Software Program to another end-user. Any transfer must include all software
    components, media, printed materials, and this License Agreement and you may not retain copies of the Software
    Program or components thereof. The transfer may not be an indirect transfer, such as a consignment. Prior to the
    transfer, the end-user receiving the transferred Software Program must agree to all these License Agreement terms.
    Upon transfer of the Software Program, your license is automatically terminated. You may not rent, sublicense, or
    assign the Software Program except to the extent provided in this License Agreement, and any attempt to do so
    shall be void.
    7UPGRADES. To Use a Software Program identified as an upgrade, you must first be licensed to the original Software
    Program identified by Lexmark as eligible for the upgrade. After upgrading, you may no longer use the original
    Software Program that formed the basis for your upgrade eligibility.
    8LIMITATION ON REVERSE ENGINEERING. You may not alter, decrypt, reverse engineer, reverse assemble, reverse
    compile or otherwise translate the Software Program, except as and to the extent expressly permitted to do so by
    applicable law for the purposes of inter-operability, error correction, and security testing. If you have such statutory
    rights, you will notify Lexmark in writing of any intended reverse engineering, reverse assembly, or reverse
    compilation. You may not decrypt the Software Program unless necessary for the legitimate Use of the Software
    Program.
    9ADDITIONAL SOFTWARE. This License Agreement applies to updates or supplements to the original Software
    Program provided by Lexmark unless Lexmark provides other terms along with the update or supplement.
    10TERM. This License Agreement is effective unless terminated or rejected. You may reject or terminate this license
    at any time by destroying all copies of the Software Program, together with all modifications, documentation, and
    merged portions in any form, or as otherwise described herein. Lexmark may terminate your license upon notice
    if you fail to comply with any of the terms of this License Agreement. Upon such termination, you agree to destroy
    all copies of the Software Program together with all modifications, documentation, and merged portions in any
    form.
    11TAXES. You agree that you are responsible for payment of any taxes including, without limitation, any goods and
    services and personal property taxes, resulting from this Agreement or your Use of the Software Program.
    12LIMITATION ON ACTIONS. No action, regardless of form, arising out of this Agreement may be brought by either
    party more than two years after the cause of action has arisen, except as provided under applicable law.
    13APPLICABLE LAW. This Agreement is governed by the laws of the Commonwealth of Kentucky, United States of
    America. No choice of law rules in any jurisdiction shall apply. The UN Convention on Contracts for the International
    Sale of Goods shall not apply.
    14UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The Software Program has been developed entirely at private
    expense. Rights of the United States Government to use the Software Program is as set forth in this Agreement and
    as restricted in DFARS 252.227-7014 and in similar FAR provisions (or any equivalent agency regulation or contract
    clause).
    15CONSENT TO USE OF DATA. You agree that Lexmark, its affiliates, and agents may collect and use information you
    provide in relation to support services performed with respect to the Software Program and requested by you.
    Lexmark agrees not to use this information in a form that personally identifies you except to the extent necessary
    to provide such services.
    Notices
    139
    Downloaded From ManualsPrinter.com Manuals 
    						
    							16EXPORT RESTRICTIONS. You may not (a) acquire, ship, transfer, or reexport, directly or indirectly, the Software
    Program or any direct product therefrom, in violation of any applicable export laws or (b) permit the Software
    Program to be used for any purpose prohibited by such export laws, including, without limitation, nuclear, chemical,
    or biological weapons proliferation.
    17AGREEMENT TO CONTRACT ELECTRONICALLY. You and Lexmark agree to form this License Agreement
    electronically. This means that when you click the “Agree” or “Yes” button on this page or use this product, you
    acknowledge your agreement to these License Agreement terms and conditions and that you are doing so with the
    intent to “sign” a contract with Lexmark.
    18CAPACITY AND AUTHORITY TO CONTRACT. You represent that you are of the legal age of majority in the place you
    sign this License Agreement and, if applicable, you are duly authorized by your employer or principal to enter into
    this contract.
    19ENTIRE AGREEMENT. This License Agreement (including any addendum or amendment to this License Agreement
    that is included with the Software Program) is the entire agreement between you and Lexmark relating to the
    Software Program. Except as otherwise provided for herein, these terms and conditions supersede all prior or
    contemporaneous oral or written communications, proposals, and representations with respect to the Software
    Program or any other subject matter covered by this License Agreement (except to the extent such extraneous
    terms do not conflict with the terms of this License Agreement, any other written agreement signed by you and
    Lexmark relating to your Use of the Software Program). To the extent any Lexmark policies or programs for support
    services conflict with the terms of this License Agreement, the terms of this License Agreement shall control.
    ADOBE SYSTEMS INCORPORATED NOTICE
    Contains Flash®, Flash® Lite™ and/or Reader® technology by Adobe Systems Incorporated
    This Product contains Adobe® Flash® player software under license from Adobe Systems Incorporated, Copyright ©
    1995-2007 Adobe Macromedia Software LLC. All rights reserved. Adobe, Reader and Flash are trademarks of Adobe
    Systems Incorporated.
    Notices
    140
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Lexmark manuals Comments (0)

    Related Manuals for Lexmark E360dn User Manual