Lexmark C935dn User Manual
Have a look at the manual Lexmark C935dn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
7Open the lower staple drawer. 8Remove the staple cartridge identified on the display. 9Remove the jammed staples, and then place the staple cartridge into the stapler. Clearing jams71 Downloaded From ManualsPrinter.com Manuals
10Close the staple drawer. 11Close Door G. 12Press . Clearing jams72 Downloaded From ManualsPrinter.com Manuals
Understanding printer menus Menus list Menu Supplies Menu Paper Menu Reports A number of menus are available to make it easy for you to change printer settings: Supplies Menu Paper Menu Reports Settings Cyan Toner Magenta Toner Yellow Toner Black Toner Color PC Units Black PC Unit Waste Toner Box Staples G5 Staples G11 Staples G12 Hole Punch BoxDefault Source Paper Size/Type Configure MP Substitute Size Paper Texture Paper Loading Custom Types Universal Setup Bin SetupMenu Settings Page Device Statistics Network Setup Page Network Setup Page Wireless Setup Page Profiles List NetWare Setup Page Print Fonts Print DirectorySetup Menu Finishing Menu Quality Menu Utilities Menu PDF Menu PostScript Menu PCL Emul Menu PPDS Menu HTML Menu Image Menu Security Network/Ports Help Max Invalid PIN Job ExpirationTCP/IP IPv6 Wireless Standard Network, Network Standard USB, USB Serial NetWare AppleTalk LexLink USB DirectPrint All Print Quality Color Quality Printing Guide Supplies Guide Media Guide Menu Map Information Guide Connection Guide Moving Guide Understanding printer menus73 Downloaded From ManualsPrinter.com Manuals
Supplies menu Menu itemDescription Cyan, Magenta, Yellow, or Black Toner Low Replace Missing or Defective OK UnsupportedShows the status of the toner cartridges Color PC Units Life Warning Replace Missing OK NormalShows the status of the cyan, yellow, and magenta photoconductor units Black PC Unit Life Warning Replace Missing OK NormalShows the status of the black photoconductor unit Waste Toner Box Near Full Replace Missing OKShows the status of the waste toner bottle Staples G5, Staples G11, or Staples G12 Low Empty Missing OKShows the status of the staples Hole Punch Box Full Missing OKShows the status of the hole punch box Understanding printer menus74 Downloaded From ManualsPrinter.com Manuals
Paper menu Default Source menu Menu itemDescription Default Source Tray MP Feeder Manual Paper Manual EnvSets a default paper source for all print jobs Notes: From the Paper menu, Configure MP must be set to Cassette in order for MP Feeder to appear as a menu setting. Tray 1 (standard tray) is the factory default setting. Only an installed paper source will appear as a menu setting. A paper source selected by a print job will override the Default Source setting for the duration of the print job. If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, the trays are automatically linked. When one tray is empty, the job prints using the linked tray. Paper Size/Type menu Menu itemDescription Tray Size 11 x 17 A3 A4 A5 JIS B4 JIS B5 Folio Legal Letter StatementSpecifies the paper size loaded in each tray Notes: Letter is the US factory default setting. A4 is the international factory default setting. For trays with automatic size sensing, only the size detected by the hardware appears. If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, the trays are automatically linked. When one tray is empty, the job prints using the linked tray. Tray Type Plain Paper Card Stock Transparency Glossy Bond Letterhead Preprinted Colored Paper Custom Type Specifies the type of paper loaded in each tray Notes: Plain Paper is the factory default setting for Tray 1. Custom Type is the factory default setting for all other trays. If available, a user‑defined name will appear instead of Custom Type . Use this menu item to configure automatic tray linking. Note: Only installed trays, drawers, and feeders are listed in this menu. Understanding printer menus75 Downloaded From ManualsPrinter.com Manuals
Menu itemDescription MP Feeder Size 11 x 17 A3 A4 A5 Executive Folio JIS B4 JIS B5 Legal Letter Statement Universal 7 3/4 Envelope 10 Envelope DL Envelope C5 Envelope B5 EnvelopeSpecifies the paper size loaded in the multipurpose feeder Notes: From the Paper menu, Configure MP must be set to Cassette in order for MP Feeder to appear as a menu setting. Letter is the US factory default setting. A4 is the international factory default setting. The multipurpose feeder does not automatically sense paper size. The paper size value must be set. MP Feeder Type Plain Paper Card Stock Transparency Glossy Labels Bond Envelope Letterhead Preprinted Colored Paper Custom Type Specifies the type of paper loaded in the multipurpose feeder Notes: From the Paper menu, Configure MP must be set to Cassette in order for MP Feeder to appear as a menu selection. Plain paper is the factory default setting. Manual Paper Size 11 x 17 A3 A4 A5 Executive Folio JIS B4 JIS B5 Legal Letter Statement UniversalSpecifies the size of the paper being manually loaded Note: Letter is the US factory default setting. A4 is the international factory default setting. Note: Only installed trays, drawers, and feeders are listed in this menu. Understanding printer menus76 Downloaded From ManualsPrinter.com Manuals
Menu itemDescription Manual Paper Type Plain Paper Card Stock Transparency Glossy Labels Bond Letterhead Preprinted Colored Paper Custom Type Specifies the type of paper being manually loaded Note: Plain Paper is the factory default setting. Manual Envelope Size 7 3/4 Envelope 10 Envelope C5 Envelope B5 Envelope DL EnvelopeSpecifies the size of the envelope being manually loaded Note: 10 Envelope is the US factory default setting. DL Envelope is the international factory default setting. Manual Envelope Type Envelope Custom Type Specifies the type of envelope being manually loaded Note: Envelope is the factory default setting. Note: Only installed trays, drawers, and feeders are listed in this menu. Configure MP menu Menu itemDescription Configure MP Cassette ManualDetermines when the printer selects paper from the multipurpose feeder Notes: Cassette is the factory default setting. The Cassette setting configures the multipurpose feeder as an automatic paper source. When Manual is selected, the multipurpose feeder can be used only for manual feed print jobs. Understanding printer menus77 Downloaded From ManualsPrinter.com Manuals
Substitute Size menu Menu itemDescription Substitute Size Off Statement/A5 Letter/A4 11 x 17/A3 All ListedSubstitutes a specified paper size if the requested paper size is not available Notes: All Listed is the factory default setting. All available substitutions are allowed. The Off setting indicates no size substitutions are allowed. Setting a substitution lets the job print without a Change Paper message appearing. Paper Texture menu Menu itemDescription Plain Texture Smooth Normal RoughSpecifies the relative texture of the paper loaded in a specific tray Note: Normal is the factory default setting. Card Stock Texture Smooth Normal RoughSpecifies the relative texture of the card stock loaded in a specific tray Notes: Normal is the factory default setting. Settings appear only if card stock is supported. Transparency Texture Smooth Normal RoughSpecifies the relative texture of the transparencies loaded in a specific tray Note: Normal is the factory default setting. Glossy Texture Smooth Normal RoughSpecifies the relative texture of the Glossy paper loaded in a specific tray Note: Normal is the factory default setting. Labels Texture Smooth Normal RoughSpecifies the relative texture of the labels loaded in a specific tray Note: Normal is the factory default setting. Bond Texture Smooth Normal RoughSpecifies the relative texture of the paper loaded in a specific tray Note: Rough is the factory default setting. Envelope Texture Smooth Normal RoughSpecifies the relative texture of the envelopes loaded in a specific tray Note: Normal is the factory default setting. Understanding printer menus78 Downloaded From ManualsPrinter.com Manuals
Menu itemDescription Letterhead Texture Smooth Normal RoughSpecifies the relative texture of the paper loaded in a specific tray Note: Normal is the factory default setting. Preprinted Texture Smooth Normal RoughSpecifies the relative texture of the paper loaded in a specific tray Note: Normal is the factory default setting. Colored Texture Smooth Normal RoughSpecifies the relative texture of the paper loaded in a specific tray Note: Normal is the factory default setting. Custom Texture Smooth Normal RoughSpecifies the relative texture of the custom paper loaded in a specific tray Notes: Normal is the factory default setting. Settings appear only if the custom type is supported. Paper Loading menu Menu itemDescription Card Stock Loading Duplex OffDetermines whether 2‑sided printing occurs for all jobs that specify Card Stock as the paper type Note: Off is the factory default setting. Labels Loading Duplex OffDetermines whether 2‑sided printing occurs for all jobs that specify Labels as the paper type Note: Off is the factory default setting. Bond Loading Duplex OffDetermines whether 2‑sided printing occurs for all jobs that specify Bond as the paper type Note: Off is the factory default setting. Letterhead Loading Duplex OffDetermines whether 2‑sided printing occurs for all jobs that specify Letterhead as the paper type Note: Off is the factory default setting. Preprinted Loading Duplex OffDetermines whether 2‑sided printing occurs for all jobs that specify Preprinted as the paper type Note: Off is the factory default setting. Notes: Duplex sets the printer default to 2‑sided printing for every print job unless 1‑sided printing is selected from Print Properties. If Duplex is selected, all print jobs are sent through the duplex unit including 1‑sided jobs. Understanding printer menus79 Downloaded From ManualsPrinter.com Manuals
Menu itemDescription Colored Loading Duplex OffDetermines whether 2‑sided printing occurs for all jobs that specify Colored as the paper type Note: Off is the factory default setting. Glossy Loading Duplex OffDetermines whether 2‑sided printing occurs for all jobs that Glossy as the paper type Note: Off is the factory default setting. Custom Loading Duplex OffDetermines whether 2‑sided printing occurs for all jobs that specify Custom as the paper type Notes: Off is the factory default setting. Custom Loading is available only if the custom type is supported. Notes: Duplex sets the printer default to 2‑sided printing for every print job unless 1‑sided printing is selected from Print Properties. If Duplex is selected, all print jobs are sent through the duplex unit including 1‑sided jobs. Custom Types menu Menu itemDefinition Custom Type Paper Card Stock Transparency Glossy Labels Bond EnvelopeAssociates a paper or specialty media type with a factory default Custom Type name or a user‑defined Custom Name created from the Embedded Web page. Notes: Paper is the factory default setting. Custom Type appears unless a user‑defined Custom Name is configured from the Embedded Web server or MarkVision. The custom media type must be supported by the selected tray or multipurpose feeder in order to print from that source. Universal Setup menu These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal Paper Size is a user‑defined paper size setting. It is listed with the other paper size settings and includes similar options, such as support for duplex printing and printing multiple pages on one sheet. Menu itemDescription Units of Measure Inches MillimetersIdentifies the units of measure Notes: Inches is the US factory default setting. Millimeters is the international factory default setting. Understanding printer menus80 Downloaded From ManualsPrinter.com Manuals