Land Rover Freelander Owners Handbook Lrl 18 02 50 501 Rover
Have a look at the manual Land Rover Freelander Owners Handbook Lrl 18 02 50 501 Rover online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 364 Land Rover manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Softback 141 Unfolding WARNING Before unfolding the softback, it is recommended that the radio aerial is either tilted towards the vertical, or removed, to avoid accidental injury. NOTE: If roof bars are fitted, they do not need to be removed to fold or unfold the softback. 1.Unfasten the side cover Velcro and stud fasteners.2.Slide the cover out of the retaining channel. NOTE: Store the side covers in the taildoor pocket in the loadspace. 3.From inside the vehicle and with the taildoor open, unhook the tonneau cover from the four hooks located on the top of the back edge of the fixed roof. H5182 H3400 H3401
Softback 142 4.From inside the vehicle, detach the corner post clips. Pull and twist to release the elbow stay locking collar. When the locking collar has unlocked, lift rearwards to initiate the folding sequence. (Left hand side shown).5.Unfold the softback rearwards. Check that the elbow stays have remained unlocked, as indicated above. H4309A H5183
Softback 143 6.A - From inside the vehicle, pull the corner posts forward into the catch position. B - Push the corner posts away from the centre of the vehicle to lock. C - Feed the corner post beading into the retaining channel. (Left hand side shown).7.Push up (where arrowed) to straighten the elbow stay. 8.Ensure elbow stay locking collar snaps up, and the location arrow moulded into the collar aligns with the rivet on the elbow stay. 9.Roll up tonneau cover and secure with the three press studs. H5184 H5185 H3406A H4312
Softback 144 10.Remove the side screens from the stowage bag and fold out the beading. 11.With the taildoor closed, locate the side screen beading into the retaining channel, as indicated. (Right hand side shown).12.Do not pull the side screen from the top, as this may damage either the side screen or vehicle, or both. 13.Slide the side screen into the retaining channel, continuing to push from the bottom until the two halves of the lower press stud align. H4338 H5186 H4315 H4314
Softback 145 14.Attach zip fastener and zip-up, secure press studs and Velcro. NOTE: The roof aerial can now be repositioned. H4300A
Hardback 146 HardbackREMOVING AND FITTING THE HARDBACK * Removal Roof bars* MUST be removed prior to removing the hardback, (See‘REMOVING AND FITTING THE ROOF BARS*’, page 150). NOTE: To avoid damaging the vehicle, hardback removal/refitting is best carried out by two people. WARNING The hardback is a heavy item. Removing and fitting should be carried out by two people. 1.Press the button on the catch, then push the catch forwards and allow to drop. H5187
Hardback 147 2.Pivot the rear locking levers 90° rearwards. 3.With assistance, lift the hardback (rear first) from the vehicle. H5188 H5189
Hardback 148 Fitting NOTE: The roof bars* MUST be removed, prior to fitting the hardback to the vehicle (see ‘REMOVING AND FITTING THE ROOF BARS*’, page 150). 1.Open taildoor, then with assistance, angle the hardback as shown and position on the vehicle. 2.Locate the rear locking pins and pivot both locking levers 90° forwards. H5190 H5191
Hardback 149 3.Push the front of the header catch upwards, slide it rearwards and push the rear of the catch upwards until it snaps into position. WARNING Do not drive the vehicle if the header catches are not secure. H5192
Roof Bars 150 Ro of BarsREMOVING AND FITTING THE ROOF BARS * Removal WARNING DO NOT remove or adjust any bolt other than those highlighted in the following illustrations. NOTE: To avoid causing accidental damage to the vehicle, removal and refitting of roof bars is best carried out by two people. The following procedure must be repeated for the right hand side of the roof bars. 1.Remove front finisher - push upwards where arrowed.2.Unscrew the front fixing bolt using a Torx key. 3.Unscrew the rear fixing bolt. H5195 H3433 H5196