Kyocera TASKalfa 552ci User Manual

Basic Operation
3-9
3
Selecting Image Quality
Select image quality suited to the type of original.
The table below shows the quality options.
The procedure for selecting the quality of copies is explained below.
1Press the Copy key.
2Place the originals on the platen.
3Set the original on the platen and press [Color/
Image Quality] -> [Original Image].
4Select the image quality.
5Press [OK].
6Press the Start key. Copying begins. Image Quality Option Description
Text+Photo For originals with both text and...

Basic Operation
3-10
Zoom Copying
Adjust the magnification to reduce or enlarge the original image. The following zoom options are available.
Auto Zoom
Automatically reduces or enlarges the original image 
suitably to the selected paper size.
Manual Zoom
Manually reduces or enlarges the original image in 1% 
increments between 25% and 400%.
Preset Zoom
Reduces or enlarges at preset magnifications.
The following magnifications are available.
Letter-RLedger: 129 %
Statement-R: 64 % A3: 141 %
A5: 70 % A4
25...

Basic Operation
3-11
3
XY Zoom
Select vertical and horizontal magnifications 
individually. Reduce or enlarge original images in 1% 
increments between 25% and 400%.
The procedure for using zoom copying is explained below.
1Press the Copy key.
2Place the originals on the platen.
3Set the original on the platen and press [Layout/
Edit] -> [Zoom].
4Press [Standard Zoom] to use Auto Zoom.
Press [+] or [–] to change the displayed 
magnification as desired. You can also enter the 
magnification directly using...

Basic Operation
3-12
Duplex Copying
Produce two-sided copies. The following duplex options are available.
You can also create single-sided copies from two-sided originals or originals with facing pages such as books. 
The following modes are available.
One-sided to Two-sided
Produces two-sided copies from one-sided originals. In 
case of an odd number of originals, the back side of the 
last copy will be blank.
The following binding options are available.
A Original Left/Right to Binding Left/Right:...

Basic Operation
3-13
3
Book to One-sided
Produces a 1-sided copy of a 2-sided or open book 
original.
The following binding options are available.
•Binding Left: Originals with facing pages are 
copied from left to right.
•Binding Right: Originals with facing pages are 
copied from right to left.
NOTE: The following sizes of originals and paper are 
supported in Two-sided to One-sided and Book to One-
sided. Original: Ledger, Letter-R, A3, B4, A4-R, B5-R, 
A5-R and 8K. Paper: Letter, A4, B5 and 16K. You...

Basic Operation
3-14
6If you choose [2-sided>>1-sided], 
[2-sided>>2-sided], [Book>>1-sided] or 
[Book>>2-sided], select the binding edge of the 
originals of Original.
7Press [Original Orientation] to select orientation of 
the originals, either [Top Edge Top] or [Top Edge 
Left]. Then press [OK].
8Press [OK].
9Press the Start key.
Once an original placed on the platen is scanned, 
replace it with the next one. Then, press the Start 
key.
After scanning all originals, press [Finish Scan] to 
start...

Basic Operation
3-15
3
With Document Finisher
When you use offsetting, printed copies are segregated 
after each set of copies (or after each page).
NOTE: The optional document finisher or 3,000 sheet 
document finisher is required.
The procedure for using collate/offset copying is 
explained below.
1Press the Copy key.
2Place the originals on the platen.
3Press [Org./Paper/Finishing] and then [Collate/
Offset].
4To use collate copying, press [On] of Collate.
To use offset copying, press [Each Set] of...

Basic Operation
3-16
Reserve Next
This function allows you to reserve the next job during printing. Using this function, the original will be scanned 
while the machine is printing. When the current print job ends, the reserved copy job is printed. The procedure 
differs depending on the Reserve Next Priority (refer to page 8-28).
If Reserve Next Priority is set to [On]
The Copy function default screen appears on the touch panel during printing.
1Place the originals onto the machine for reserving 
copy,...

Basic Operation
3-17
3
Interrupt Copy
This function allows you to pause the current jobs in progress when you need to make copies immediately.
When interruption copy ends, the machine resumes the paused print jobs.
NOTE: If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically 
cancelled and printing resumes. You can change the delay until interrupt copying is cancelled. Change the 
delay as required. For more information, refer to Interrupt Clear Timer on...

Basic Operation
3-18
Staple
Use this feature to staple your finished copies.
NOTE: Stapling requires the optional document finisher or 3,000 sheet document finisher. Note also that 
saddle stitching (center stapling) requires the folding unit.
The following stapling options and orientations are available.
Original Orientation: 
Top Edge (Back Edge)Original Orientation: 
Top Edge (Back Edge)Original Orientation: 
Left Top Edge (Left top 
corner)Original Orientation: 
Left Top Edge (Left top 
corner)
3,000...