Kyocera KM 2560 User Manual

Basic Operation 
OPERATION GUIDE3-15
3
2Press [Standard Zoom] to use Auto Zoom.
Press [+] or [–] to change the displayed magnification as desired. You can 
also enter the magnification directly  using the numeric keys by pressing [# 
Keys].
When using Preset 
Zoom, select the key 
of desired 
magnification.
When using XY 
Zoom, press [XY 
Zoom].
Press [+] or [–] to 
change the 
displayed 
magnifications of X 
(horizontal) and Y (vertical). You can al so enter the magnification directly 
using the...

Basic Operation 
3-16OPERATION GUIDE
Duplex Copying
Produce two-sided copies. The following duplex options are available.
One-sided to Two-sided
Produces two-sided copies from one-sided originals. In case of an odd 
number of originals, the back side of the last copy will be blank.
The following binding options are available.
A Original Left/Right to Binding Left/Right: Images on the second sides 
are not rotated.
B Original Left/Right to Binding Top: Images on the second sides are 
rotated 180°. Copies...

Basic Operation 
OPERATION GUIDE3-17
3
Two-sided to Two-sided
Produces two-sided copies from two-sided originals. The optional 
document processor is required.
NOTE: The paper sizes supported in Two-sided to Two-sided are Ledger, 
Legal, Letter, Letter-R, Executive, St atement-R, Oficio II, 8.5×13.5, A3, 
B4, A4, A4-R, B5, B5 -R, A5-R and Folio.
Book to One-sided Produces a 1-sided copy of a 2-sided or open book original.
The following binding options are available.
•Binding Left : Originals with facing...

Basic Operation 
3-18OPERATION GUIDE Book to Two-sided
Produces two-sided copies from an open book original with facing pages.
NOTE: The sizes of originals and paper supported in Book to Two-sided 
are Letter, A4, B5, and 16K.
The procedure for using two-sided/duplex copying is explained below.
1Press [Layout/Edit] 
and then [Duplex].
2Select the desired 
Duplex option.
3If you choose [2-sided>>2-sided], [2-sided>>1-sided], [Book>>1-sided] or 
[Book>>2-sided], select the binding edge of the originals of...

Basic Operation 
OPERATION GUIDE3-19
3
6Press [OK].
7Place the original and press the Start key.
Once an original placed on the platen is scanned, replace it with the next 
one. Then, press the Start key.
After scanning all originals, press [Scan finish] to start copying.
Collate/Offset Copying
The machine can collate and offset at the same time as it copies. 
You can use the Collate/Offset copy function for tasks such as those 
shown below.
Collate
Scan multiple originals and 
deliver complete sets of...

Basic Operation 
3-20OPERATION GUIDE
1Press [Org./Paper/
Finishing] and then 
[Collate/Offset].
2To use collate 
copying, press [On] 
of Collate.
To use offset 
copying, press 
[Each Set] of Offset.
Press [OK].
3If [Off] is selected for 
Collate, press [Off] 
or [Each Page] in 
Offset.
4Press [OK].
5Use the numeric keys to enter the copy quantity.
6Place the originals and press the Start key. Copying begins.
Status10/10/2007    10:1 0
Image
Quality Set Original.Copy Image
Org./Paper /
Finis hing Quick...

Basic Operation 
OPERATION GUIDE3-21
3
Reserve Copy
This function allows you to reserve the next copy job during printing.
Using this function, the original will be scanned while the machine is 
printing.
When the current print job ends, the reserved copy job is printed.
The procedure differs depending on the Reserve Next Priority Settings.
If Reserve Next Priority Setting is set to On
The Copy function default screen appears on the touch panel during 
printing.
1Place the originals 
onto the machine for...

Basic Operation 
3-22OPERATION GUIDE
Interrupt Copy
This function allows you to pause the current jobs in progress when you 
need to make copies immediately.
When interruption copy ends, the machine resumes the paused print jobs.
The procedure differs depending on the Reserve Next Priority Settings.
If Reserve Next Priority Setting is set to On
The Copy function default screen appears on the touch panel during 
printing. 
1Press [Interrupt].
Ready to interrupt 
copy. is displayed.
The current print job...

Basic Operation 
OPERATION GUIDE3-23
3
If Reserve Next Priority Setting is set to Off
The Copying screen appears on the touch panel during printing.
1Press [Interrupt].
The current print job 
is temporarily 
interrupted.
2Place the originals onto the machine for interrupt copy, and configure the 
copy settings.
3Press the Start key to start interrupt copying.
4When interrupt copying ends, press [Interrupt].
The machine resumes the paused print jobs.
NOTE: If the machine is left for 60 seconds, interrupt...

Basic Operation 
3-24OPERATION GUIDE
Printing - Printing from Applications
Follow the steps below to print documents from applications.
NOTE: To print the document from applications, install the printer driver 
on your computer from the supplied CD-ROM (Product Library). 
1Create a document using an application.
2Click File and select Print in the application. The Print dialog box appears.
3Click the T button 
next to the Name 
field and select this 
machine from the 
list.
4Enter the desired print...